J. Barański

发表

Computer modelling of masonry cross vaults strengthened with fiber reinforced polymer strips

J. Szołomicki, P. Berkowski, J. Barański, 2015 .

Wood Moisture-Content Measurement Accuracy of Impregnated and Nonimpregnated Wood

J. Barański, A. Suchta, S. Barańska, 2021, Sensors.

Impact of high temperature drying process on beech wood containing tension wood

J. Barański, A. Konopka, Tatiana Vilkovská, 2019, Open Engineering.

Deformation and surface color changes of beech and oak wood lamellas resulting from the drying process

J. Barański, A. Konopka, Tatiana Vilkovská, 2020 .

THE EFFECT OF WOOD DRYING METHOD ON THE GRANULARITY OF SAWDUST OBTAINED DURING THE SAWING PROCESS USING THE FRAME SAWING MACHINE

T. Rogoziński, A. Banski, D. Chuchala, 2019 .

The Influence of Drying Temperature on Color Change of Hornbeam and Maple Wood Used as Surface and Inner Layers of Wood Composites

D. Chuchala, K. Orłowski, J. Barański, 2021, Applied Sciences.

The impact of drying and steaming processes on surface color changes of tension and normal beech wood

J. Barański, A. Konopka, Tatiana Vilkovská, 2018, Drying Technology.

Moisture content during and after high- and normal-temperature drying processes of wood

J. Barański, 2018 .

High Temperature Drying Process of Beech Wood (Fagus sylvatica L.) with Different Zones of Sapwood and Red False Heartwood

J. Barański, Ivan Klement, Jacek Barański, 2017 .

The Effect of Wood Provenance and Density on Cutting Forces While Sawing Scots Pine (Pinus sylvestris L.)

Jakub Sandak, Kazimierz Orłowski, Anna Sandak, 2014 .

Mathematical model of the energy consumption calculation during the pine sawn wood (Pinus sylvestris L.) drying process

D. Mikielewicz, L. Dzurenda, K. Orłowski, 2021, Wood Science and Technology.

Determination of moisture content profiles of spruce wood after high temperature process and air drying

L. Dzurenda, D. Chuchala, K. Orłowski, 2013 .

Influence of high temperature air-steam mixture application on time wood drying process

J. Barański, M. Wierzbowski, 2013 .

High temperature drying of beech with content of tension wood

J. Barański, A. Konopka, V. Tatiana, 2016 .

The change of mechanical properties of selected wood species after drying process under various conditions

J. Barański, A. Konopka, M. Wierzbowski, 2014 .

The influence of high temperature wood drying confitions using air-steam mixture on its properties

J. Barański, A. Konopka, I. Klement, 2015 .

The selected effects of high temperature air-steam mixture wood drying

J. Barański, A. Konopka, M. Wierzbowski, 2015 .

The influence of drying parameters on wood properties

D. Chuchala, K. Orłowski, J. Barański, 2014 .

Numerical Analysis of the Joints of Prefabricated Elements in Large-Panel Buildings Located on the Areas of Mining Damages

J. Szołomicki, J. Barański, P. Latka, 2017 .

Particulate Matter Production of Small Heat Source Depending on the Bark Content in Wood Pellets

J. Jandačka, Radovan Nosek, M. Holubčík, 2018, Emission Control Science and Technology.

Gasification of Densified Biomass (DB) and Municipal Solid Wastes (MSW) Using HTA/SG Technology

J. Wajs, J. Stasiek, J. Barański, 2021, Processes.

The Effect of Full-Cell Impregnation of Pine Wood (Pinus sylvestris L.) on Changes in Electrical Resistance and on the Accuracy of Moisture Content Measurement Using Resistance Meters

K. Orłowski, K. Szymanowski, J. Barański, 2018 .

Physical and numerical modelling of flow pattern and combustion process in pulverized fuel fired boiler

Jacek Baranski, J. Barański, 2002 .