Hiroaki Tanaka

发表

A Theoretical Study of Dropwise Condensation

Hiroaki Tanaka, 1975 .

An Atomistic Analysis of Nanometric Chip Removal as Affected by Tool-Work Interaction in Diamond Turning

Hiroaki Tanaka, Naoya Ikawa, N. Ikawa, 1991 .

Minimum thickness of cut in micromachining

Hiroaki Tanaka, Shoichi Shimada, Naoya Ikawa, 1992 .

Molecular Dynamics Analysis of Cutting Force and Chip Formation Process in Microcutting.

Hiroaki Tanaka, Shoichi Shimada, Naoya Ikawa, 1993 .

The effect of spatial restriction on the inner-layer structure of wall turbulence

S. Maruyama, Hiroaki Tanaka, 1987, Journal of Fluid Mechanics.

DROP-SIZE DISTRIBUTIONS AND HEAT TRANSFER IN DROPWISE CONDENSATION - CONDENSATION COEFFICIENT OF WATER AT LOW PRESSURES

Hiroaki Tanaka, S. Hatamiya, 1986 .

Measurements of Drop-Size Distributions During Transient Dropwise Condensation

Hiroaki Tanaka, 1975 .

A stochastic model for deterioration process of tunnel lining concrete in cold regions

Osamu Maruyama, Hiroaki Nishi, Hiroaki Tanaka, 2014 .

Novel model explaining toluene diffusion in HZSM-5 after surface modification

J. Lercher, Shourong Zheng, A. Jentys, 2004 .

A Study on the Stability of Solution in the Distinct Element Method

Yuji Nagasaki, Koji Inooku, Masahiro Miyazaki, 1998 .

Simplified Model Predicting Contact-Line-Length Density at Critical Heat Flux Based on Direct Observation of Boiling Structure

S. Nishio, Hiroaki Tanaka, 2002 .

Uphill Diffusion Effects during Hydrogen Permeation in Palladium-Cerium Alloy Membranes

Hiroaki Tanaka, F. A. Lewis, X. Tong, 1997 .

Enhanced diffusion of surface atoms at metal/electrolyte interface under potential control

S. Hara, Hiroaki Tanaka, N. Hirai, 1998 .

A Boundary Element Method for the Analysis of Nonlinear Sloshing in Three-Dimensional Containers.

T. Nakayama, Hiroaki Tanaka, 1991 .

Stress development of latex coatings in a convection drying with the accumulation and deformation of polymer particles

Hiroaki Tanaka, Takafumi Horie, N. Ohmura, 2022, Progress in Organic Coatings.

On the Mechanics and Physics in the Nano-Indentation of Silicon Monocrystals.

Hiroaki Tanaka, Liangchi Zhang, Hiroaki Tanaka, 1999 .

Thermo-Chemical Wear Mechanism of Diamond Tool in Machining of Ferrous Metals

Masahiro Higuchi, Hiroaki Tanaka, Shoichi Shimada, 2004 .

Damage-free machining of monocrystalline silicon carbide

S. Shimada, Hiroaki Tanaka, 2013 .

Towards a deeper understanding of wear and friction on the atomic scale—a molecular dynamics analysis

Hiroaki Tanaka, Liangchi Zhang, Hiroaki Tanaka, 1997 .

Atomic scale deformation in silicon monocrystals induced by two-body and three-body contact sliding

Hiroaki Tanaka, Liangchi Zhang, Hiroaki Tanaka, 1998 .

Mechanism of Cutting Edge Chipping and Its Suppression in Diamond Turning of Copper

Masahiro Higuchi, Hiroaki Tanaka, Shoichi Shimada, 2005 .

Difference in Wear Patterns of Diamond Cutting Tool Depending on Work Materials

N. Ikawa, S. Shimada, M. Higuchi, 2002 .

Suppression mechanism of tool wear by phosphorous addition in diamond turning of electroless nickel deposits

Masahiro Higuchi, Hiroaki Tanaka, Shoichi Shimada, 2010 .

Scientific Screening of Raw Diamond for an Ultraprecision Cutting Tool with High Durability

Masahiro Higuchi, Hiroaki Tanaka, Shoichi Shimada, 2006 .

Clinical Observations on the Stages of Teeth Development Using the Longitudinal Data

Hiroaki Tanaka, 2004 .

Requirements for ductile-mode machining based on deformation analysis of mono-crystalline silicon by molecular dynamics simulation

Hiroaki Tanaka, Shoichi Shimada, S. Shimada, 2007 .

Combined Forced and Natural Convection Heat Transfer for Upward flow in a Uniformly Heated Vertical Pipe : Series B : Fluids Engineering, Heat Transfer, Combustion, Power, Thermophysical Properties

S. Maruyama, Hiroaki Tanaka, S. Hatano, 1987 .

Ordering of the Structure of Polymer-Capped Gold Nanorods under an External Electric Field.

Hiroaki Tanaka, Y. Hatakeyama, K. Hino, 2020, The journal of physical chemistry letters.

Effect of laminarization and retransition on heat transfer for low Reynolds number flow through a converging to constant area duct

Hiroshi Kawamura, Hiroaki Tanaka, H. Kawamura, 1982 .

Visualization of boiling structures in high heat–flux pool-boiling

Shigefumi Nishio, Hiroaki Tanaka, S. Nishio, 2004 .

Random thermal fatigue in fast breeder reactor: a narrow-band spectrum

Hiroaki Tanaka, Michiko Toyoda, Hiroaki Tanaka, 1996 .

Reliability degradation of structural components in the process of fatigue crack propagation under stationary random loading

Hiroaki Tanaka, Akira Tsurui, A. Tsurui, 1987 .

Cost-based optimal relation between inspection time and assessment time for random fatigue crack growth

Hiroaki Tanaka, M. Toyoda-Makino, Hiroaki Tanaka, 1998 .

THE EFFECT OF STRESS RATIO ON THE CRACK PROPAGATION LIFE DISTRIBUTION UNDER RANDOM LOADING

A. Tsurui, A. Utsumi, Hiroaki Tanaka, 1994 .

Suppression of Tool Wear in Diamond Turning of Copper under Reduced Oxygen Atmosphere

Masahiro Higuchi, Hiroaki Tanaka, Naoya Ikawa, 2000 .

A Numerical Method for the Analysis of Nonlinear Sloshing in Circular Cylindrical Containers

T. Nakayama, Hiroaki Tanaka, 1991 .

Simulation of soil deformation and resistance at bar penetration by the Distinct Element Method

Akira Oida, Hiroaki Tanaka, Minoru Yamazaki, 2000 .

Feasibility Study on Ultimate Accuracy in Microcutting Using Molecular Dynamics Simulation

Hiroaki Tanaka, Shoichi Shimada, Junichi Uchikoshi, 1993 .

Structure of Micromachined Surface Simulated by Molecular Dynamics Analysis

Hiroaki Tanaka, Shoichi Shimada, Junichi Uchikoshi, 1994 .

Thermal Stresses in Porous Materials under Thermal Shock by Cooling Medium-Infiltration Effect on Thermal Stress Distributions-

H. Awaji, Sawao Honda, Hiroaki Tanaka, 2004 .

Some Essentials of Simulating Nano-Surfacing Processes Using the Molecular Dynamics Method

Hiroaki Tanaka, Wun Chet Davy Cheong, Liangchi Zhang, 2001 .

Time-variant structural reliability analysis using bivariate diffusive crack growth models

G. I. Schuëller, Hiroaki Tanaka, Akira Tsurui, 1990 .

Time variant structural reliability analysis using diffusive crack growth models

G. Schuëller, A. Tsurui, Hiroaki Tanaka, 1989 .

Effect of Knudsen Number on Dropwise Condensation

Hiroaki Tanaka, 1981 .

Further Developments of Dropwise Condensation Theory

Hiroaki Tanaka, 1979 .

Chip Morphology and Minimum Thickness of Cut in Micromachining.

R. R. Donaldson, Hiroaki Tanaka, Shoichi Shimada, 1993 .