D. Sharar

发表

Flow boiling performance in smooth and internally-grooved tube U-bend cold plates

A. Bar-Cohen, D. Sharar, Spencer Argenna, 2017, 2017 16th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm).

Flow regimes and evaporative heat transfer coefficients for flow boiling in smooth and internally-grooved tubes

A. Bar-Cohen, D. Sharar, 2016, 2016 15th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm).

TWO-PHASE FLOW REGIMES AND EVAPORATIVE HEAT TRANSFER IN INTERNALLY-GROOVED TUBES

A. Bar-Cohen, D. Sharar, 2014 .

Nonintrusive Optical Validation of Two-Phase Flow Regimes in a Small-Diameter Tube

Nicholas R. Jankowski, A. Bar-Cohen, A. Bergles, 2016 .

Temperature-Dependent Adhesion Mechanisms of Metal and Insulator Probe-Sample Contact Pairs

Adam A. Wilson, D. Sharar, 2018, 2018 17th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm).

Robust Thermal Performance of a Flat-Plate Oscillating Heat Pipe During High-Gravity Loading

Darin J. Sharar, Nicholas R. Jankowski, Brian C. Morgan, 2011 .

Laser Powder Bed Fusion of Defect-Free NiTi Shape Memory Alloy Parts with Superior Tensile Superelasticity

A. Elwany, R. Arróyave, I. Karaman, 2022, Acta Materialia.

Additively Manufacturing Nitinol as a Solid-State Phase Change Material

A. Elwany, A. Smith, R. Arróyave, 2020, 2020 19th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm).

Thermal performance of a flat polymer heat pipe heat spreader under high acceleration

Nicholas R. Jankowski, Y. Lee, B. Morgan, 2012 .

Toward High-Throughput Thermal Characterization of Combinatorial Thin-Film Solid State Phase Change Materials

I. Kierzewski, Adam A. Wilson, D. Sharar, 2021, 2021 20th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (iTherm).

Intra- and inter-device passive thermal management using solid-solid Nickel Titanium phase change materials

H. Tsang, Adam A. Wilson, D. Sharar, 2022, 2022 21st IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (iTherm).

High-capacity high-power thermal energy storage using solid-solid martensitic transformations

A. Smith, Adam A. Wilson, D. Sharar, 2020, 2011.12339.

NiTiHf shape memory alloys as phase change thermal storage materials

I. Karaman, Adam A. Wilson, D. Sharar, 2021 .

Heterogeneous nucleation of gallium with lattice-matched cubic carbide and nitride phases

D. Sharar, P. Shamberger, S. Chakravarty, 2021, Journal of Applied Physics.

High frequency, low power, electrically actuated shape memory alloy MEMS bimorph thermal actuators

Hugh Alan Bruck, C. Morris, Gabriel L. Smith, 2019, Journal of Micromechanics and Microengineering.

First Demonstration of a Bending-Mode Elastocaloric Cooling ‘Loop’

B. Hanrahan, R. Warzoha, D. Sharar, 2018, 2018 17th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm).

Two-Phase Thermal Ground Planes: Technology Development and Parametric Results

Darin J. Sharar, Nicholas R. Jankowski, Avram Bar-Cohen, 2015 .

Two-Phase Minichannel Cold Plate for Army Vehicle Power Electronics

Brian Morgan, Darin J. Sharar, Nicholas R. Jankowski, 2011 .

Review of Two-phase Electronics Cooling for Army Vehicle Applications

Brian Morgan, Darin J. Sharar, Nicholas R. Jankowski, 2010 .

Thermal performance of a Direct-Bond-Copper Aluminum Nitride manifold-microchannel cooler

Nicholas R. Jankowski, B. Morgan, D. Sharar, 2010, 2010 26th Annual IEEE Semiconductor Thermal Measurement and Management Symposium (SEMI-THERM).

Liquid Film Wave Patterns and Dryout in Microgap Channel Annular Flow

A. Bar-Cohen, D. Sharar, C. Holloway, 2014 .

Low-force elastocaloric refrigeration via bending

B. Hanrahan, A. Smith, R. Warzoha, 2021, Applied Physics Letters.

Grain growth-induced thermal property enhancement of NiTi shape memory alloys for elastocaloric refrigeration and thermal energy storage systems

A. Smith, B. Donovan, R. Warzoha, 2020, International Journal of Heat and Mass Transfer.

Interface Density Effects on Cross-Plane Thermal Conductance of Nanolaminate Thin Films

A. Smith, R. Warzoha, Adam A. Wilson, 2020, 2020 19th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm).

FLOW REGIME DRIVEN THERMAL ENHANCEMENT IN INTERNALLY-GROOVED TUBES

Darin James Sharar, D. Sharar, 2016 .

Solid-state thermal energy storage using reversible martensitic transformations

Brian F. Donovan, B. Hanrahan, B. Donovan, 2019, Applied Physics Letters.

Modified Model for Improved Flow Regime Prediction in Internally-Grooved Tubes

Darin J. Sharar, Nicholas R. Jankowski, Avram Bar-Cohen, 2013 .

Flow Regime Transition in Inner Grooved Minichannel Cold Plates for Cooling Hybrid Electric Power Electronics

Darin J. Sharar, Nicholas R. Jankowski, Avram Bar-Cohen, 2013 .

PCM-BASED HEAT SINK FOR PASSIVE COOLING OF ELECTRONIC COMPONENTS: NUMERICAL AND EXPERIMENTAL STUDY

D. Sharar, Lior Rodes, T. Shockner, 2023, Proceeding of International Heat Transfer Conference 17.

Experimental and parametric numerical investigation of finned heat sinks with organic and metallic phase-change materials

G. Ziskind, O. Gal, O. Regev, 2023, International Journal of Heat and Mass Transfer.