J.S.C. Jang

发表

Elastic and plastic deformations in a high entropy alloy investigated using a nanoindentation method

T. Nieh, D. Wu, J.S.C. Jang, 2016 .

Effects of B2 precipitate size on transformation-induced plasticity of Cu―Zr―Al glassy alloys

J. C. Huang, Che-Hsin Lin, T. Nieh, 2014 .

Effect of cast process and microalloying on the fracture toughness of Zr-based bulk amorphous alloys

J. C. Huang, J. Li, J.S.C. Jang, 2014 .

Significantly enhanced mechanical properties of ZrAlCo bulk amorphous alloy by microalloying with Ta

J. C. Huang, J.S.C. Jang, Y. Jiang, 2018 .

Designing novel lightweight, high-strength and high-plasticity Ti (AlCrNb)100- medium-entropy alloys

Hsin-jay Wu, K. Hsieh, J.S.C. Jang, 2020 .

Significantly enhanced drilling ability of the orthopedic drill made of Zr-based bulk metallic glass composite

J. C. Huang, J.S.C. Jang, Kai-Ti Hsu, 2016 .

Room- and elevated-temperature nano-scaled mechanical properties of low-density Ti-based medium entropy alloy

J. C. Huang, J. S. Jang, J.S.C. Jang, 2020 .

The fabrication and property evaluation of Zr–Ti–B–Si thin film metallic glass materials

J. Chu, J. Duh, B. Lou, 2014 .

Effect of Al concentration on the microstructural and mechanical properties of lightweight Ti60Alx(VCrNb)40-x medium-entropy alloys

K. Hsieh, J.S.C. Jang, I. Tsao, 2021 .

The hall-petch relationship in nanocrystalline iron produced by ball milling

C. Koch, J.S.C. Jang, J. Jang, 1990 .

New method for determination of hidden supercooled liquid region of TiZr-based amorphous alloys

V. Nguyen, J.S.C. Jang, T. Li, 2019, Journal of Non-Crystalline Solids.

Significant TRIP-effect improvement by manipulating ZrCu-B2 distribution in ZrCuAlCo-based bulk metallic glass composites via inoculating Ta particles

J.S.C. Jang, V. Nguyen, J.S.C. Jang, 2019, Journal of Alloys and Compounds.

Degradation behavior and mechanical strength of Mg-Zn-Ca bulk metallic glass composites with Ti particles as biodegradable materials

J. C. Huang, Cheng-Kung Cheng, J.S.C. Jang, 2017 .

Effect of coating thickness on the cutting sharpness and durability of Zr-based metallic glass thin film coated surgical blades

J. Chu, J.S.C. Jang, K. Hsu, 2016 .

Enhanced cutting durability of surgical blade by coating with Fe-based metallic glass thin film

J. Chu, J. Duh, J.S.C. Jang, 2015 .

Interfacial analysis of the ex-situ reinforced phase of a laser spot welded Zr-based bulk metallic glass composite

J.S.C. Jang, Dong-Yih Lin, D. Lin, 2013 .

Prominent Fe-based bulk amorphous steel alloy with large supercooled liquid region and superior corrosion resistance

J. C. Huang, J. Chu, J. Li, 2014 .

Enhanced Mechanical Properties of MgZnCa Bulk Metallic Glass Composites with Ti-Particle Dispersion

J. C. Huang, Cheng-Kung Cheng, J.S.C. Jang, 2016 .

Synthesis and characterization of an open-pore toxic-element-free Ti-based bulk metallic glass foam for bio-implant application

J. Li, J.S.C. Jang, T. Li, 2020 .

Nanocrystallization of Zr61Al7.5Cu17.5Ni10Si4 metallic glass

C. Liu, J.S.C. Jang, L. Chang, 2009 .

Characterization of mechanical properties and adhesion of Ta–Zr–Cu–Al–Ag thin film metallic glasses

J. Duh, Jyh-Wei Lee, Hsien-Wei Chen, 2013 .

Mg–Cu–Gd layered composite plate synthesized via the spray forming process

M. Guo, C. Tsao, J.S.C. Jang, 2008 .

Microstructure and mechanical properties of Zr-Ti-Cu-Nd metallic glass composites

Yu-Shiang Wu, J.S.C. Jang, J. C. Huang, 2017 .

Microstructure and mechanical properties of open-cell porous Ti-6Al-4V fabricated by selective laser melting

T. L. Yang, J. C. Huang, Che-Hsin Lin, 2017 .