I. Altenberger

发表

High temperature fatigue behavior and residual stress stability of laser-shock peened and deep rolled austenitic steel AISI 304

H. Maier, B. Scholtes, I. Nikitin, 2004 .

Residual stress relaxation of deep-rolled Al–Mg–Si–Cu alloy during cyclic loading at elevated temperatures

I. Altenberger, P. Juijerm, 2006 .

Comparison of the fatigue behavior and residual stress stability of laser-shock peened and deep rolled austenitic stainless steel AISI 304 in the temperature range 25–600 °C

I. Nikitin, I. Altenberger, 2007 .

On the influence of mechanical surface treatments—deep rolling and laser shock peening—on the fatigue behavior of Ti–6Al–4V at ambient and elevated temperatures

Berthold Scholtes, Robert O. Ritchie, Ravi K. Nalla, 2003 .

Cyclic deformation and near surface microstructures of shot peened or deep rolled austenitic stainless steel AISI 304

Berthold Scholtes, Ulrich Martin, B. Scholtes, 1999 .

On the effect of deep-rolling and laser-peening on the stress-controlled low- and high-cycle fatigue behavior of Ti-6Al-4V at elevated temperatures up to 550 C

Robert O. Ritchie, Yuji Sano, Ravi K. Nalla, 2012 .

An in situ transmission electron microscopy study of the thermal stability of near-surface microstructures induced by deep rolling and laser-shock peening

Eric A. Stach, Robert O. Ritchie, Ravi K. Nalla, 2003 .

Cyclic deformation and near surface microstructures of normalized shot peened steel SAE 1045

Berthold Scholtes, Ulrich Martin, B. Scholtes, 1998 .

Fatigue performance of high-temperature deep-rolled metallic materials

I. Altenberger, P. Juijerm, Patiphan Juijerm, 2017 .

Surface layer properties and fatigue behavior in Al 7075‐T73 and Ti‐6Al‐4V

Yuji Sano, L. Wagner, M. Mhaede, 2011 .

Fatigue Performance of Al 7075-T 73 and Ti-6 Al-4 V : Comparing Results after Shot Peening , Laser Shock Peening and Ball -

L. Wagner, M. Mhaede, I. Altenberger, 2011 .

Fatigue and residual stress relaxation of deep rolled differently aged aluminium alloy AA6110

B. Scholtes, I. Altenberger, P. Juijerm, 2006 .

Residual Stress State and Fatigue Behaviour of Laser Shock Peened Titanium Alloys

B. Scholtes, I. Nikitin, I. Altenberger, 2006 .

Residual Stress Relaxation and Cyclic Deformation Behavior of Deep Rolled AlMg4.5Mn (AA5083) at Elevated Temperatures

B. Scholtes, U. Noster, I. Altenberger, 2005 .

Alternative Mechanical Surface Treatments for Fatigue Strength Enhancement

I. Altenberger, I. Altenberger, 2005 .

Fatigue of deep rolled AlMg4.5Mn (AA5083) in the temperature range 20–300 °C

B. Scholtes, U. Noster, I. Altenberger, 2004 .

An in situ transmission electron microscopy study of the thermal stability of near-surface microstructures induced by deep rolling and laser-shock peening

G. Y. Liu, R. Ritchie, R. Nalla, 2003 .

Fatigue performance enhancement of steels using mechanical surface treatments

I. Altenberger, P. Juijerm, Igor Altenberger, 2017 .

Ultra‐low cycle torsion fatigue of annealed copper

I. Altenberger, U. Hofmann, J. Riedle, 2015 .

Spray Forming of Copper Alloys

I. Altenberger, H. R. Müller, 2017 .

Corrosion Behavior and Mechanical Properties of Ultrafine‐Grained Pure Copper with Potential as a Biomaterial

L. Wagner, B. Hadzima, F. Pastorek, 2016 .

Directional γ-γ′ coarsening in a monocrystalline nickel-based superalloy during low-cycle thermomechanical fatigue

H. Mughrabi, S. Kraft, I. Altenberger, 1995 .

Laser Peening without Coating as a Surface Enhancement Technology

B. Scholtes, K. Masaki, Y. Ochi, 2006 .

Mechanical and thermal stability of mechanically induced near-surface nanostructures

H. Maier, B. Scholtes, I. Nikitin, 2005 .

Effects of microstructure on mechanical properties of CuNiSi alloys

L. Wagner, M. Janeček, J. Veselý, 2017 .

Ultrafine-Grained High Strength Cu-Ni-Si Alloys

L. Wagner, M. Mhaede, I. Altenberger, 2017 .

Effects of severe plastic deformation on transformation kinetics of precipitates in CuNi3Si1Mg

L. Wagner, M. Janeček, J. Veselý, 2016 .

Isothermal Fatigue of Magnesium Wrought Alloy AZ31

B. Scholtes, U. Noster, I. Altenberger, 2006 .

Effect of temperature on cyclic deformation behavior and residual stress relaxation of deep rolled under-aged aluminium alloy AA6110

I. Altenberger, P. Juijerm, 2007 .

Ultrafine-Grained Precipitation Hardened Copper Alloys by Swaging or Accumulative Roll Bonding

L. Wagner, M. Mhaede, I. Altenberger, 2015 .

Characterization of ultrafine grained Cu-Ni-Si alloys by electron backscatter diffraction

M. Mhaede, I. Altenberger, H. Kuhn, 2014 .

Effects of shot peening on the fatigue performance of ultrafine-grained CuNi3Si1Mg

L. Wagner, I. Altenberger, M. Wollmann, 2017 .

Material properties of high–strength beryllium–free copper alloys

L. Wagner, M. Mhaede, I. Altenberger, 2015 .

Effect of swaging and mechanical surface treatments on the mechanical properties of the spray-formed ultra high strength copper alloy CuMn 20 Ni 20

L. Wagner, M. Mhaede, I. Altenberger, 2015 .

Mechanical Surface Treatments to Improve Fatigue Performance of cp-Cu

L. Wagner, I. Altenberger, M. Gholami, 2015 .

Influence of ageing on cyclic deformation behavior and residual stress relaxation of deep rolled as-quenched aluminium alloy AA6110

B. Scholtes, I. Altenberger, P. Juijerm, 2007 .

Nanoscale Near-Surface Microstructures and High Temperature Fatigue of Laser-Shock Peened and Deep Rolled Ti-6 Al-4 V

L. Wagner, I. Altenberger, Y. Sano, 2020 .

Effects of Deep Rolling and Its Modification on Fatigue Performance of Aluminium Alloy AA6110

I. Altenberger, P. Juijerm, 2012 .

Improvement of fatigue behaviour of mechanically surface treated materials by annealing

B. Scholtes, I. Altenberger, 1999 .

EFFECT OF DEEP ROLLING AT ELEVATED AND LOW TEMPERATURES ON THE ISOTHERMAL FATIGUE BEHAVIOR OF AlSl 304

B. Scholtes, I. Nikitin, I. Altenberger, 2007 .

Effect of high-temperature deep rolling on cyclic deformation behavior of solution-heat-treated Al–Mg–Si–Cu alloy

I. Altenberger, P. Juijerm, 2007 .

Residual Stress Stability in High Temperature Fatigued Mechanically Surface Treated Metallic Materials

B. Scholtes, I. Nikitin, I. Altenberger, 2006 .

Fatigue behavior of deep rolled Al–Mg–Si–Cu alloy at elevated temperature

I. Altenberger, P. Juijerm, 2006 .

Alternative Mechanical Surface Treatments: Microstructures, Residual Stresses & Fatigue Behavior

I. Altenberger, Igor Altenberger, 2006 .

Enhancement of Surface Property by Low-Energy Laser Peening without Protective Coating

B. Scholtes, Tatsuo Inoue, K. Masaki, 2007 .

Residual Stress State and Cyclic Deformation Behaviour of Deep Rolled and Laser-Shock Peened AISI 304 Stainless Steel at Elevated Temperatures

B. Scholtes, I. Nikitin, I. Altenberger, 2005 .

Effective boundary of deep-rolling treatment and its correlation with residual stress stability of Al–Mg–Mn and Al–Mg–Si–Cu alloys

I. Altenberger, P. Juijerm, P. Juijerm, 2007 .

Effects of Mechanical Surface Treatment on Fatigue Failure in Ti-6Al-4V: Role of Residual Stresses and Foreign-Object Damage

R. Ritchie, B. Scholtes, B. Boyce, 2002 .

On the Fatigue Behavior and Associated Effect of Residual Stresses in Deep-Rolled and Laser Shock Peened Ti-6 Al-4 V Alloys at Ambient and Elevated Temperatures

R. Ritchie, R. Nalla, B. Scholtes, 2002 .