F. Coury

发表

Effect of boron addition on the solidification sequence and microstructure of AlCoCrFeNi alloys

W. Wolf, C. Kiminami, C. Bolfarini, 2019, Journal of Alloys and Compounds.

Solid-solution strengthening in refractory high entropy alloys

A. Clarke, M. Kaufman, F. Coury, 2019, Acta Materialia.

Phase equilibria, mechanical properties and design of quaternary refractory high entropy alloys

A. Clarke, K. Chaput, T. Butler, 2018, Materials & Design.

Design, phase equilibria, and coarsening kinetics of a new γ/γ′ precipitation-hardened multi-principal element alloy

C. Kiminami, F. Coury, C. S. Kiminami, 2021 .

Insight into the complex ternary phase behavior in Al-Mn-Ce alloys

W. Wolf, C. Kiminami, M. Kaufman, 2017 .

Multi-principal element alloys from the CrCoNi family: outlook and perspectives

C. Bolfarini, G. Zepon, F. Coury, 2021, Journal of Materials Research and Technology.

Design and in-situ characterization of a strong and ductile co-rich multicomponent alloy with transformation induced plasticity

C. Kiminami, A. Clarke, M. Kaufman, 2019 .

Consolidation of Fe-Based Metallic Glass Powders by Hot Pressing

P. Gargarella, C. Kiminami, M. Kaufman, 2019, Materials Research.

Solid solution strengthening mechanisms in high entropy alloys

F. Coury, F. G. Coury, 2019 .

Corrosion resistant and tough multi-principal element Cr-Co-Ni alloys

N. Birbilis, C. Kiminami, A. Clarke, 2021 .

A Hall–Petch study of the high toughness Cr_40Co_30Ni_30 multi-principal element alloy

F. Coury, Fernanda C. Puosso, G. Bertoli, 2022, Journal of Materials Research.

Hall–Petch and grain growth kinetics of the low stacking fault energy TRIP Cr40Co40Ni20 multi-principal element alloy

C. Kiminami, A. Clarke, F. Coury, 2021, Applied Physics Letters.

Phase equilibria of VCrMnFeCo High Entropy Alloys

C. Kiminami, F. Coury, C. S. Kiminami, 2022, Journal of Alloys and Compounds.

Mechanical Properties and Yield Strength Modeling of a Medium Entropy Alloy Containing L12 Precipitates

C. Kiminami, F. Coury, C. S. Kiminami, 2021, Journal of Alloys and Compounds.

Microstructure and Wear Behavior of High-Carbon Concentration CrCoNi Multi-principal Element Alloys

C. Kiminami, A. Clarke, G. Y. Koga, 2021, Metallurgical and Materials Transactions A.

Reassessment of the effects of Ce on quasicrystal formation and microstructural evolution in rapidly solidified Al–Mn alloys

C. Kiminami, C. Bolfarini, M. Kaufman, 2015 .

The effect of oxygen on the microstructural evolution in crystallized Cu–Zr–Al metallic glasses

C. Kiminami, C. Bolfarini, M. Kaufman, 2015 .

The role of yttrium and oxygen on the crystallization behavior of a Cu–Zr–Al metallic glass

C. Kiminami, C. Bolfarini, M. Kaufman, 2014 .

The role of twinning and nano-crystalline ω phase on the fatigue behavior of the metastable β Ti-15Mo alloy

C. Bolfarini, M. Kaufman, Paulo Sergio da Silva, 2018 .

Design of a FeMnAlC steel with TWIP effect and evaluation of its tensile and fatigue properties

W. Wolf, C. Kiminami, C. Bolfarini, 2020 .

Influence of Al Additions on the Microstructure and Mechanical Properties of a C and Si-Free High-Mn Steel

C. Bolfarini, W. Botta, G. Zepon, 2020, Metals.

High-Throughput Solid Solution Strengthening Characterization in High Entropy Alloys

A. Clarke, M. Kaufman, K. Clarke, 2018, Acta Materialia.

Identification of Potential TRIP Alloys by CALPHAD Methods, an Accessible Approach

F. Coury, A. Clarke, B. Ellyson, 2023, JOM.

In-Situ Observation of FCC→HCP Transformation-Induced Plasticity Behavior During Dynamic Deformation of CoCrNi Multi-principal Element Alloys

N. Parab, K. Fezzaa, C. Kirk, 2022, Metallurgical and Materials Transactions A.

High Throughput Discovery and Design of Strong Multicomponent Metallic Solid Solutions

A. Clarke, M. Kaufman, K. Clarke, 2018, Scientific Reports.

Impact of rolling temperature on the deformation structure and mechanical performance of a CrMnFeCoNi high-entropy alloy

M. J. Paul, E. M. Mazzer, F. Coury, 2023, Journal of Alloys and Compounds.

Tailoring the Microstructure and Properties of Reinforced FeMnAlC Composites by In-Situ TiB_2–TiC–M_2B Formation

C. Bolfarini, F. Coury, L. Otani, 2023, Metallurgical and Materials Transactions A.

The formation of quasicrystals in Al-Cu-Fe-(M=Cr, Ni) melt-spun ribbons

W. Wolf, C. Bolfarini, M. Kaufman, 2018 .

Eco-friendly design of complex refractory aggregates as alternatives to the magnesia-chromite ones

V. Pandolfelli, F. Coury, D. Muche, 2023, Journal of the European Ceramic Society.

Additive manufacturing of a quasicrystal-forming Al95Fe2Cr2Ti1 alloy with remarkable high-temperature strength and ductility

P. Gargarella, S. Pauly, V. Uhlenwinkel, 2021 .

Effects of semi-solid structure on interface formation of dissimilar aluminum to galvanized steel welds produced by load-controlled Refill Friction Stir Spot Welding

J. D. dos Santos, N. Alcântara, G. Y. Koga, 2022, Journal of Manufacturing Processes.

Thermodynamics and Kinetics of Refractory Multi-principal Element Alloys: An Experimental and Modeling Comparison

A. Clarke, N. Philips, P. Mason, 2023, Metallurgical and Materials Transactions A.

Comparative study between two die cast methods for processing Cu–Zr–Al bulk metallic glasses

C. Bolfarini, C. Afonso, F. Coury, 2013 .

Thermally sprayed multi-principal element Cr40Co40Ni20 coatings – Oxidation upon coatings' build-up and electrochemical corrosion

C. Moreau, C. Bolfarini, W. Botta, 2022, Surface and Coatings Technology.

Computational thermodynamics-guided alloy design and phase stability in CoCrFeMnNi-based medium-and high-entropy alloys: An experimental-theoretical study

C. Bolfarini, K. Clarke, F. Coury, 2024, Scripta Materialia.