Paul J. Bills

发表

Areal surface texture measurement of additively manufactured parts

Andrew Townsend, Liam Blunt, Luca Pagani, 2016 .

The development of a geometric methodology for the determination of volumetric wear in total joint replacements & development of a total knee replacement joint using new and novel measurement techniques.

Paul J. Bills, 2007 .

The evolution of Geometrical Product Specification and Verification in the field of surface metrology and the challenges of its vocational training

Tukun Li, Paul J. Bills, Radu Racasan, 2016 .

Measurement of material loss

Liam Blunt, Shaojun Xiao, Paul J. Bills, 2013 .

The use of additive manufacturing for the presentation of ballistic toolmark evidence in court

Liam Blunt, Xiang Jiang, Paul J. Bills, 2015 .

Methods to assess material loss of the modular taper interface in retrieved hip replacements

Liam Blunt, Paul J. Bills, Radu Racasan, 2014 .

Differential wear between femoral heads and acetabular cup inserts in metal-on-metal total replacement joints

Simon S. Smith, Paul J. Bills, Graham Isaac, 2002 .

Bearing Surface Changes Of Retrieved MOM Hips Predict Factors Associated With Failure

Paul J. Bills, John Skinner, Alister Hart, 2014 .

Challenges in measurement and specification of complex additive manufactured structures for the medical device industry

Paul J. Bills, Radu Racasan, Paras Shah, 2016 .

What is required to measure the wear of explanted metal-on-metal hips?

Paul J. Bills, Philippa Cann, Richard Underwood, 2012 .

Comparison of Different Additive Manufacturing Methods Using Optimized Computed Tomography

Paul J. Bills, Radu Racasan, Paras Shah, 2016 .

Characterizing edge-wear in ceramic-on-ceramic acetabular cups

Mazen Al-Hajjar, Paul J. Bills, Radu Racasan, 2016 .

Characterization of complex additive manufactured structures for the medical device industry using computed tomography

Andrew Townsend, Liam Blunt, Paul J. Bills, 2016 .

Wear Measurement of MoM Hips

Liam Blunt, Paul J. Bills, 2011 .

An integrated framework of reference for the qualification of personnel in coordinate metrology

Enrico Savio, Nabil Anwer, Tino Hausotte, 2019 .

Measurement of Bearing Surfaces

Liam Blunt, Paul J. Bills, 2012 .

Developing techniques for the dimensional assessment of true clinical wear in retrieved total joint replacements

Liam Blunt, Paul J. Bills, G. Chakrabarty, 2008 .

Accurate determination of clinical wear in retrieved metal-on-metal hip replacement joints

Liam Blunt, Paul J. Bills, Radu Racasan, 2012 .

Measurement of Tapers

Liam Blunt, Paul J. Bills, Radu Racasan, 2012 .

Focus variation measurement and advanced analysis of volumetric loss at the femoral head taper interface of retrieved modular replacement hips in replica

Liam Blunt, Paul J. Bills, Radu Racasan, 2019, Journal of Physics: Conference Series.

Development of an Additive Manufactured Artifact to Characterize Unfused Powder Using Computed Tomography

Liam Blunt, Paul J. Bills, Radu Racasan, 2020, Int. J. Autom. Technol..

Challenges in Inspecting Internal Features for SLM Additive Manufactured Build Artifacts

Liam Blunt, Paul J. Bills, André Beerlink, 2020 .

The Definition of Taper Failure in Metal-On-Metal Modular Total Hip Replacement

Paul J. Bills, Gordon Blunn, Alister Hart, 2012 .

Development of a technique for accurately determining clinical wear in explanted total hip replacements

Liam Blunt, Xiang Jiang, Paul J. Bills, 2007 .

Defining True Tribological Contact Through Application of the Morphological Method to Surface Topography

Paul J. Scott, Shan Lou, Xiangqian Jiang, 2013, Tribology Letters.

Assessing the material loss of the modular taper interface in retrieved metal-on-metal hip replacements

Liam Blunt, Paul J. Bills, Radu Racasan, 2015 .

Comparison of different additive manufacturing methods using computed tomography

Paul J. Bills, Radu Racasan, Paras Shah, 2016 .

Volumetric wear assessment of retrieved metal-on-metal hip prostheses and the impact of measurement uncertainty

Liam Blunt, Xiang Jiang, Paul J. Bills, 2012 .