Di Wu

发表

Experimental investigation of Ti-Nb-Co ternary system at 1000 °C

Li-bin Liu, Shuaixiong Huang, X. Zhang, 2017 .

Computation fluid dynamic simulation and experimental validation of shear induce dissociation coupling ultrafiltration technology for the treatment of lead contained wastewater

Di Wu, Y. Qiu, Shu-yun Tang, 2020, Separation and Purification Technology.

New high-strength Ti–Al–V–Mo alloy: from high-throughput composition design to mechanical properties

Li-bin Liu, Di Wu, Li-gang Zhang, 2019, International Journal of Minerals, Metallurgy and Materials.

Defect-rich MoS2 nanosheets vertically grown on graphene-protected Ni foams for high efficient electrocatalytic hydrogen evolution

X. Xiong, P. Zhu, Di Wu, 2018, International Journal of Hydrogen Energy.

A metallic MoS2 nanosheet array on graphene-protected Ni foam as a highly efficient electrocatalytic hydrogen evolution cathode

X. Xiong, P. Zhu, Di Wu, 2018 .

Tunable large-area phase reversion in chemical vapor deposited few-layer MoTe2 films

Xukun Zhu, X. Xiong, P. Zhu, 2019, Journal of Materials Chemistry C.

Epitaxial growth of <010>-oriented MoO2 nanorods on m-sapphire

Yongli Gao, Youzhen Li, F. Song, 2020 .

Investigation of the influence of Fe on the microstructure and properties of Ti5553 near-β titanium alloy with combinatorial approach

Li-bin Liu, Shuaixiong Huang, Yun Jiang, 2017 .

Improvement in anti-corrosion property of hydrogenated diamond-like carbon film by modifying CrC interlayer

Zhiming Yu, Q. Wei, Na-Wei Liu, 2017 .

Diffusivities and atomic mobilities in bcc Ti Nb Ta alloys

Guanglong Xu, Lijun Zeng, Li-bin Liu, 2019, Calphad.

Microstructure and tensile properties of a cost-affordable and ultrahigh-strength metastable β titanium alloy with a composition of Ti-6Al-1Mo-1Fe-6.9Cr

Li-bin Liu, Di Wu, Li-gang Zhang, 2021, Journal of Alloys and Compounds.

Design of Low-Cost and High-Strength Titanium Alloys Using Pseudo-Spinodal Mechanism through Diffusion Couple Technology and CALPHAD

C. Liu, Li-bin Liu, Di Wu, 2021, Materials.

A titanium alloys design method based on high-throughput experiments and machine learning

K. Zhou, Xiaoyong Zhang, Di Wu, 2021 .

Tensile deformation mechanism and micro-void nucleation of Ti-55531 alloy with bimodal microstructure

K. Zhou, Li-bin Liu, Di Wu, 2020 .

Designing high-strength titanium alloy using pseudo-spinodal mechanism through diffusion multiple experiment and CALPHAD calculation

K. Zhou, Xiaoyong Zhang, Wenguang Zhu, 2020 .

α″ phase-assisted nucleation to obtain ultrafine α precipitates for designing high-strength near-β titanium alloys

K. Zhou, Li-bin Liu, Di Wu, 2020 .

Effect of Fe content on microstructures and properties of Ti6Al4V alloy with combinatorial approach

Lijun Zeng, Li-bin Liu, Di Wu, 2018, Transactions of Nonferrous Metals Society of China.

Characterization of Microstructure and Texture Evolution in Ti664 Titanium Alloy After Multidirectional Forging and Annealing Treatments

P. Masset, Li-bin Liu, Di Wu, 2019, JOM.

Pseudo-spinodal mechanism approach to designing a near-β high-strength titanium alloy through high-throughput technique

P. Masset, Li-bin Liu, Di Wu, 2020, Rare Metals.

Optimal Design of High-Strength Ti‒Al‒V‒Zr Alloys through a Combinatorial Approach

K. Zhou, Li-bin Liu, Di Wu, 2018, Materials.

Influence of cooling rate on ω phase precipitation and deformation mechanism of a novel metastable β titanium alloy

Li-bin Liu, Kai Wang, Di Wu, 2021, Materials Science and Engineering: A.

Diffusivities and Atomic Mobilities in bcc Ti-Mo-Zr Alloys

Guanglong Xu, Di Wu, Guanglong Xu, 2018, Materials.

Experimental reinvestigation and thermodynamic description of Bi-Te binary system

Li-bin Liu, Cun Mao, Di Wu, 2018 .

Characterization of a novel 14H-LPSO structure and related elevated-temperature mechanical behaviors in an extruded Mg–Y–Zn–Cu alloy

W. Ke, B. Shi, R. S. Chen, 2020 .

Effect of Solution Treatment on the Microstructure and Mechanical Properties of Sand-Cast Mg–9Gd–4Y–0.5Zr Alloy

N. Zhang, Rongshi Chen, Di Wu, 2018, Acta Metallurgica Sinica (English Letters).

Synergistic effects of Ce and Mg on the microstructure and tensile properties of Al-7Si-0.3Mg-0.2Fe alloy

Jidong Kang, Ru Su, C. Liu, 2019, Journal of Alloys and Compounds.

Design of high strength titanium alloy through finding a critical composition with ultra-fine α phase

Li-bin Liu, Di Wu, Li-gang Zhang, 2020, Materials Research Express.

Experimental investigation and thermodynamic assessment of Al–Ca–Ni ternary system

Ye He, Li-bin Liu, Shuaixiong Huang, 2017, Journal of Materials Science.

The electronic and magnetic properties of the doped quaternary compounds Os1−x−y MnxCryAl2 in MoSi2 type structure

R. Ma, Xiaohe Liu, Di Wu, 2016 .

Plasmon-enhanced photothermoelectric conversion in chemical vapor deposited graphene p-n junctions.

Li Lin, Hailin Peng, Di Wu, 2013, Journal of the American Chemical Society.

High temperature response capability in carbon nanotube/polymer nanocomposites

Yang Wang, Tao Xiao, Shen Gong, 2018, Composites Science and Technology.

A percolation network model to predict the electrical property of flexible CNT/PDMS composite films fabricated by spin coating technique

Zhou Li, Z. Xiao, Di Wu, 2019, Composites Part B: Engineering.

High electrical conductivity of individual epitaxially grown MoO2 nanorods

Yongli Gao, Xueao Zhang, Jiao-jian Shi, 2017 .

Electronic Structure and Chemical Modification of Graphene Antidot Lattices

Jin Xiao, Hui Xu, Di Wu, 2010 .

Novel Biocompatible Zr-Based Alloy with Low Young’s Modulus and Magnetic Susceptibility for Biomedical Implants

Dawei Yang, Li-bin Liu, Di Wu, 2020, Materials.

The chemical modification of graphene antidot lattices

Zhiming Yu, Jin Xiao, Di Wu, 2010 .

Electrical characterization of flexible CNT/polydimethylsiloxane composite films with finite thickness

Z. Xiao, Di Wu, S. Gong, 2019 .

Experimental Investigation of the Ti-Nb-Sn Isothermal Section at 1173 K

Li-bin Liu, Di Wu, Li-gang Zhang, 2016 .