Zaoyuan Li

发表

Contamination of cement slurries with diesel-based drilling fluids in a shale gas well

Ming Li, Hongjuan Ou, Zaoyuan Li, 2015 .

Remediation of oil-based mud contaminated cement with talcum in shale gas well primary cementing: Mechanical properties, microstructure, and hydration

Zaoyuan Li, Sheng Huang, F. Bo, 2021 .

Design and Evaluation of High-Temperature Well Cementing Slurry System Based on Fractal Theory

Zaoyuan Li, X. Guo, Guanyi Zheng, 2021, Energies.

Cement reinforcing and toughening agent microcrystalline brownmillerite: preparation and hydration

Chunmei Zhang, Xiaowei Cheng, Yongsheng Yang, 2019, Advances in Cement Research.

Synthesis of microcrystalline brownmillerite Ca2(Al,Fe)2O5 and its influence of mechanical properties to the class G oil-well cement

W. Duan, Yong-qiang Yang, Xiaowei Cheng, 2018 .

Analysis of interfacial nanostructure and interaction mechanisms between cellulose fibres and calcium silicate hydrates using experimental and molecular dynamics simulation data

Chunmei Zhang, Xiaowei Cheng, Kaiqiang Liu, 2020 .

Characterization of the unidirectional corrosion of oilwell cement exposed to H2S under high-sulfur gas reservoir conditions

Xiaowei Cheng, Zaoyuan Li, Gu Tao, 2015 .

Research on the law of mechanical damage-induced deformation of cement sheaths of a gas storage well

L. Luan, P. Luo, Zaoyuan Li, 2017 .

Study of the failure mechanisms of a cement sheath based on an equivalent physical experiment

Xiaowei Cheng, Zaoyuan Li, X. Guo, 2016 .

Deformation and damage of cement sheath in gas storage wells under cyclic loading

Jingyuan Sun, Zaoyuan Li, Sheng Huang, 2021, Energy Science & Engineering.

Degradation of high molecular weight polyacrylamide by alkali-activated persulfate: Reactivity and potential application in filter cake removal before cementing

W. Duan, Xiaowei Cheng, Zhang Xingguo, 2019, Journal of Petroleum Science and Engineering.

Synergetic activation of persulfate by heat and Fe(II)-complexes for hydrolyzed polyacrylamide degradation at high pH condition: Kinetics, mechanism, and application potential for filter cake removal during cementing in CO2 storage wells.

Sheng Huang, Xiaowei Cheng, Zaoyuan Li, 2020, The Science of the total environment.

Mechanism for the promotional effect of a novel solidifiable spacer fluid system on the cementation quality of cement sheath/formation interface

Zaoyuan Li, Shizhong Tang, D. Su, 2020, Energy Science & Engineering.

Mechanical properties of oil well cement stone reinforced with hybrid fiber of calcium carbonate whisker and carbon fiber

Meng Liu, Ming Li, Zaoyuan Li, 2015 .

Theoretical Analysis of the Micro Annulus of an Oil-Well Cement Sheath Formed via Cooling under Acid-Fracturing Conditions

Xuning Wu, Jingyuan Sun, Zaoyuan Li, 2022, Processes.

High-temperature mechanical properties of calcium sulfate whisker-reinforced high-alumina cement

Xiaowei Cheng, Zaoyuan Li, X. Guo, 2020 .

Numerical modeling of motion of displacement interface in eccentric annulus during primary cementing

P. Luo, Zaoyuan Li, Sheng Huang, 2020, Energy Science & Engineering.

Time effectiveness of the low-temperature plasma surface modification of ground tire rubber powder

Sheng Huang, Dan Long, Xiaowei Cheng, 2015 .

The Slag Influence on High Temperature Resistance of Aluminophosphate Cementfor Heavy Oil Thermal Recovery

Xiaowei Cheng, Zaoyuan Li, X. Guo, 2013 .

Research on the Interface Structure during Unidirectional Corrosion for Oil-Well Cement in H2S Based on Computed Tomography Technology

Xiaowei Cheng, Kaiyuan Mei, Xingguo Zhang, 2016 .

Synergistic activation of persulfate by heat and cobalt-doped-bimetallic-MOFs for effective methylene blue degradation: Synthesis, kinetics, DFT calculation, and mechanisms

Jingyuan Sun, Zaoyuan Li, Sheng Huang, 2023, Journal of Environmental Chemical Engineering.

The effect of different activators on the performance of an inorganic solidifiable gel plugging fluid

Zhang Xingguo, Zaoyuan Li, X. Guo, 2016 .

Study of the impact of solidifier inorganic components on the performance of a solidifiable gel plugging fluid

Zaoyuan Li, X. Guo, Zhizhong Deng, 2015 .

Novel Method for Characterizing the Mechanical Properties of the Cement Sheath Based on Hollow-Cylinder Specimen and Multiaxial Load Tests

Xuning Wu, Zaoyuan Li, Sheng Huang, 2022, SPE Journal.

Theoretical study on the hydraulic sealing integrity of cement sheath in horizontal shale oil wells under fracturing: Crack propagation mode and mechanism

Xuning Wu, Zaoyuan Li, Sheng Huang, 2022, Advances in Mechanical Engineering.

Numerical Simulation on the Safety and Quality of Cementing by Using Pad Fluid in Horizontal Wells

Xuning Wu, Jiawen Fu, Jingyuan Sun, 2023, Energies.

Numerical modeling for CO2 storage with impurities associated with enhanced gas recovery in depleted gas reservoirs

Z. Hou, Jianxing Liao, Cheng Cao, 2022, Journal of Natural Gas Science and Engineering.

Research on New Materials to Improve the Bonding Strength and Relieve Contamination of the Cement Slurry with Oil Based Muds

Tao Gu, Hongjuan Ou, Zaoyuan Li, 2016 .

Influence of potassium titanate whisker on the mechanical properties and microstructure of calcium aluminate cement for in situ combustion

W. Duan, Zaoyuan Li, X. Guo, 2018 .

Coupled effect of CO2 attack and tensile stress on well cement under CO2 storage conditions

A. H. Korayem, W. Duan, Zaoyuan Li, 2017 .

Study on Structural Change and Permeability Development Law of Cementing Slurry before Initial Setting in High-Temperature and Deep Well Environment

Youzhi Zheng, Zaoyuan Li, Jun Zhao, 2022, SPE Journal.

Mechanical properties and nonlinear deformation description model of cement stone

Rui Chen, Yang Liu, Xuning Wu, 2023, Geoenergy Science and Engineering.

Enhancing Environmental Protection in Oil and Gas Wells through Improved Prediction Method of Cement Slurry Temperature

Jian Liu, Xuning Wu, Zaoyuan Li, 2023, Energies.

Experiment and failure mechanism of cement sheath integrity under development and production conditions based on a mechanical equivalent theory

Xuning Wu, Zaoyuan Li, Sheng Huang, 2021, Energy Science & Engineering.

Contamination of cement slurries with oil based mud and its components in cementing operations

Hongjuan Ou, Zaoyuan Li, Gu Tao, 2016 .

Mechanical property design method of cement sheath in a horizontal shale oil well under fracturing conditions

Dunqing Xiao, Zaoyuan Li, Sheng Huang, 2022, Petroleum Exploration and Development.

Failure Analysis of Cement Sheath Mechanical Integrity Based on the Statistical Damage Variable

Rui Chen, Yang Liu, Xuning Wu, 2023, ACS Omega.

The influence of sulfomethyl phenol formaldehyde resin (SMP) on cementing slurry

Kaiyuan Mei, Kaiqiang Liu, Zaoyuan Li, 2015 .

Corrosion behavior and mechanism of P110 casing steel in alkaline-activated persulfate-based preflush fluid

Yang Liu, Zaoyuan Li, Sheng Huang, 2023, Engineering Failure Analysis.

Gleaning insights from German energy transition and large-scale underground energy storage for China’s carbon neutrality

Xuning Wu, Yachen Xie, Z. Hou, 2023, International Journal of Mining Science and Technology.

Research on the Relationship between Pore Structure and the Compressive Strength of Oil-Well Cement

Jingyuan Sun, Zaoyuan Li, X. Guo, 2023, Energies.

An analysis of the microscopic cracking mechanism of hardened alkali-activated slag

Zaoyuan Li, Xiaoyang Guo, Zhizhong Deng, 2018 .

Machine learning-based prediction model for CO2-induced corrosion on oil well cement under high-pressure and high-temperature condition

Zaoyuan Li, Sheng Huang, D. Su, 2024, Construction and Building Materials.