V. Fedotov

发表

Development of rapidly quenched brazing foils to join tungsten alloys with ferritic steel

M. Rohde, B. Kalin, V. Fedotov, 2004 .

Development of brazing foils to join monocrystalline tungsten alloys with ODS-EUROFER steel

M. Rohde, B. Kalin, V. Fedotov, 2007 .

Application of amorphous filler metals in production of fusion reactor high heat flux components

V. Fedotov, A. Grigoriev, S. Tserevitinov, 1995 .

Be–Cu joints based on amorphous alloy brazing for divertor and first wall application

I. Mazul, O. Sevryukov, B. Kalin, 1999 .

High-pressure phase transformations, microstructure, and magnetic properties of the hypereutectic alloy 10Ni-90Al

O. G. Éllert, K. Solntsev, V. Fedotov, 2013, Inorganic Materials.

Erosion of tungsten and its brazed joints with bronze irradiated by pulsed deuterium plasma flows

P. S. Dzhumaev, O. Sevryukov, B. Kalin, 2013 .

Erosion of a TiAl intermetallic alloy under conditions simulating plasma disruptions

M. V. Zolotarev, P. S. Dzhumaev, O. Sevryukov, 2009 .

Investigation of fusion reactor candidate materials erosion in plasma disruption simulation experiments

B. Kalin, V. Fedotov, V. L. Yakushin, 1998 .

Application of rapidly solidified amorphous and microcrystalline filler metals in brazing of divertor components

I. Mazul, Y. G. Prokofyev, O. Sevryukov, 1996 .

Application of Rapidly Quenched Ribbon-Type Filler Metals for Brazing of the High-Heat-Flux Elements of ITER

P. S. Dzhumaev, I. Mazul, A. Suchkov, 2012 .

Using rapidly quenched brazing alloys for brazing structural elements of thermonuclear reactors

O. Sevryukov, V. Fedotov, V. Kalin, 2004 .

The manufacture of the first wall and diverter of the thermonuclear reactor (TNR) requires the production of heat resistant joints of dissimilar materials (beryllium,

O. Sevryukov, V. Fedotov, V. Kalin, 2004 .

Barothermal analysis of phase transformations of an Al-15 at % Ni alloy and its structure and magnetic properties

O. G. Éllert, V. Fedotov, A. Suchkov, 2013, Inorganic Materials.

Phase transformations at high pressures and temperatures and the structure of a hypoeutectic 1Ni-99Al alloy

V. Fedotov, A. Suchkov, L. I. Shvorneva, 2012, Russian Metallurgy (Metally).

Barothermal analysis and structure of the eutectic Al-Ni (2.7 at % Ni) alloy

V. Fedotov, A. Suchkov, L. I. Shvorneva, 2012, Inorganic Materials.

Thermography of the phase transformations in nickel-based eutectic alloys at high pressures and temperatures

V. Tsarev, V. Fedotov, A. Suchkov, 2011 .

High-pressure phase transitions and structure of Al–20 at % Si hypereutectic alloy

V. Fedotov, A. Suchkov, A. D. Izotov, 2016, Inorganic Materials.

Barothermography and microstructure of the hypoeutectic and eutectic alloys in Al–Si system

V. Fedotov, A. Suchkov, A. Padalko, 2015, Journal of Thermal Analysis and Calorimetry.

Phase transformations in a binary 10 at % Si-90 at % Al alloy at high pressures and temperatures

V. Fedotov, A. Suchkov, L. I. Shvorneva, 2014, Russian Metallurgy (Metally).

Pressure effect on the phase transformations and structure of an Al-12 at % Si alloy

V. Fedotov, A. Suchkov, L. I. Shvorneva, 2014, Inorganic Materials.

Brazing of Be with CuCrZr-bronze using copper-based filler metal STEMET

A. Suchkov, O. Sevryukov, B. Kalin, 2016 .

Structural features of composite materials produced by melt quenching

V. Fedotov, A. Shelyakov, H. Roesner, 2011 .

Brazing of hexagonal boron-nitride ceramics with VT1-0 titanium alloy using a rapidly quenched titanium-based brazing alloy

A. Suchkov, O. Sevryukov, V. Fedotov, 2015 .