S. Copley

发表

Laser Machining of Silicon Nitride: Energetics

R. Wallace, S. Copley, 1986 .

Shaping Materials with Lasers

M. Bass, B. Jau, R. Wallace, 1983 .

Beam processing of advanced materials

J. Singh, S. Copley, 1993 .

Laser-Sustained Plasma (LSP) Nitriding of Titanium: A Review

Amar M. Kamat, A. Segall, J. A. Todd, 2019, Coatings.

The effect of uniaxial stress on the periodic morphology of coherent gamma prime precipitates in nickel-base superalloy crystals

J. Tien, S. Copley, 1971 .

Temperature and Orientation Dependence of Plastic Deformation in GaAs Single Crystals Doped with Si, Cr, or Zn

S. Copley, V. Swaminathan, 1975 .

Quantative microstructural analysis of thermal barrier coatings produced by electron beam physical vapor deposition

Jogender Singh, D. Wolfe, J. A. Todd, 2009 .

Deformation of Polycrystalline MgO at Elevated Temperatures

J. A. Pask, S. Copley, 1965 .

Shaping Ceramics with a Continuous Wave Carbon Dioxide Laser

M. Bass, R. Wallace, S. Copley, 1983 .

A new model for precipitation at moving interphase boundaries

J. A. Todd, S. Copley, P. Li, 1988 .

Cooperative growth at interphase boundaries in solid-solid and solid-liquid systems

J. A. Todd, S. Copley, 1988 .

Effect of processing parameters on microstructure during laser-sustained plasma (LSP) nitriding of commercially-pure titanium

Amar M. Kamat, J. A. Todd, S. Copley, 2016 .

Chapter II – HIGH-STRENGTH NONFERROUS ALLOYS

S. Copley, 1976 .

PLASTIC DEFORMATION OF MgO SINGLE CRYSTALS UP TO 1600 C

J. A. Pask, S. Copley, 1965 .

Fatigue resistance of laser heat-treated 1045 carbon steel

Michael Bass, Stephen M. Copley, S. Copley, 1981 .

Solidification of a laser melted nickel-base superalloy

M. Bass, E. V. Stryland, S. Copley, 1979 .

The effect of interstitials on phase equilibria in P[Ti, Zr, Hf]-X[β-stabilizer (s)] alloy systems

S. Copley, G. Narayanan, T. Khaled, 1981 .

Novel techniques in synthesis and processing of advanced materials

Jogender Singh, S. Copley, 1994 .

Elastic Constants of Single‐Crystal Ni3Al from 10° to 850°C

J. B. Wachtman, S. Copley, R. W. Dickson, 1969 .

The microstructure of metastable phases in Ag-Cu alloys generated by continuous laser melt quenching

M. Bass, S. Copley, David G. Beck, 1981 .

The fabrication and creep resistance of unidirectionally solidified helical springs

B. Kear, S. Copley, M. F. Hornbecker, 1972 .

The dependence of the width of a dissociated dislocation on dislocation velocity

B. Kear, S. Copley, 1968 .

The temperature and orientation dependence of yielding in Mar-M200 single crystals

B. Kear, G. Rowe, S. Copley, 1972 .

Independent slip systems in CsCl-type crystals

S. Copley, 1963 .

Effect of Crystal Orientation on Plastic Deformation of Magnesium Oxide

J. A. Pask, S. Copley, C. Hulse, 1963 .

A new method for isolating plasma interactions from those of the laser beam during plasma nitriding

J. A. Todd, S. Copley, A. N. Black, 2017 .

A two-step laser-sustained plasma nitriding process for deep-case hardening of commercially pure titanium

Amar M. Kamat, J. A. Todd, S. Copley, 2017 .

Enhancement of CP-titanum wear resistance using a two-step CO2 laser-sustained plasma nitriding process

Amar M. Kamat, A. Segall, J. A. Todd, 2017 .

Effect of CO2 Laser‐Sustained Nitrogen Plasma on Heat and Mass Transfer During Laser‐Nitriding of Commercially‐Pure Titanium

Amar M. Kamat, J. A. Todd, S. Copley, 2016 .

The effect of orientation and sense of applied uniaxial stress on the morphology of coherent gamma prime precipitates in stress annealed nickel-base superalloy crystals

J. Tien, S. Copley, 1971 .

DEFORMATION OF POLYCRYSTALLINE CERAMICS

J. A. Pask, S. Copley, 1966 .

The origin of freckles in unidirectionally solidified castings

A. F. Giamei, S. Johnson, S. Copley, 1970, Metallurgical and Materials Transactions B.

The origin of freckles in unidirectionally solidified castings

A. F. Giamei, S. Johnson, S. Copley, 1970 .

The Role of Interfaces in Ni-Base Superalloys

B. Kear, F. L. Versnyder, S. Copley, 1968 .

Metallographic techniques for evaluation of Thermal Barrier Coatings produced by Electron Beam Physical Vapor Deposition

Jogender Singh, D. Wolfe, J. A. Todd, 2008 .

The Effect of Interfaces on the Behavior of In-Situ Metallic Composites

S. Copley, 1974 .

The Origin of Freckles in Solidified Castings Unidirectionally

A. F. Giamei, S. Johnson, S. Copley, 1970 .

Thermally induced residual stresses in eutectic composites

D. Koss, S. Copley, 1971, Metallurgical Transactions.

Laser machining of silicon nitride

M. Bass, R. Wallace, S. Copley, 1985 .

On the accelerated ageing of CFRP

S. Copley, T. Collings, 1983 .

Investigations of laser-sustained plasma and its role in laser nitriding of titanium

A. Nassar, J. A. Todd, R. Akarapu, 2012 .

The constitution and phase stability of overlapping melt trails in Ag- Cu alloys produced by continuous laser melt quenching

M. Bass, S. Copley, David G. Beck, 1982 .

Numerical model of a laser-sustained argon plasma

A. Nassar, J. A. Todd, R. Akarapu, 2009 .

Phase Equilibria and Interstitial Effects in the Ti-V-Mo Alloy System

S. Copley, G. Narayanan, T. Khaled, 1978 .

Thermo-mechanical behavior of ceramics.

J. A. Pask, S. Copley, 1964 .

Stability of the beta phase in the Ti−V−Mo−Cr system

S. Copley, G. Narayanan, T. Khaled, 1979 .

Method for predicting microsegregation‐free solidification with application to Ag‐Cu alloys

M. Yankova, J. A. Todd, S. Copley, 1991 .

Epitaxial resolidification in laser melted superalloys

M. Bass, E. V. Van Stryland, S. Copley, 1977, IEEE Journal of Quantum Electronics.

Solidification of Agcu Alloys at High Growth Rates Produced by Continuous Laser Melt Quenching

M. Yankova, J. A. Todd, S. Copley, 1996 .

Segregation in binary metallic solid solutions due to diffusional creep

S. Copley, M. N. Menon, 1974 .

Characterization of Spectral Emissions from Laser Irradiated Titanium

A. Nassar, J. A. Todd, R. Akarapu, 2007 .

New Insight into the Banded Microstructure of Rapidly Solidified Ag-Cu Alloys : Experiment and Theory

M. Yankova, J. A. Todd, S. Copley, 1990 .