D. Low

发表

Comparative statistical analysis of hole taper and circularity in laser percussion drilling

Lin Li, M. Ghoreishi, D. Low, 2002 .

Precision glass machining, drilling and profile cutting by short pulse lasers

S. Nikumb, Hongyu Y Zheng, D. Low, 2005 .

Femtosecond laser direct writing of embedded optical waveguides in aluminosilicate glass

H. Xie, G. Lim, D. Low, 2005 .

Advances in laser materials processing research and applications

Jonathan Lawrence, David K. Y. Low, J. Lawrence, 2006 .

Fabrication of buried hybrid sol gel optical waveguides by femtosecond laser direct writing

M. Iyer, C. C. Wong, D. Low, 2006 .

Spatter-free laser percussion drilling of closely spaced array holes

Lin Li, P. Byrd, D. Low, 2001 .

Room temperature deposition of sputtered TiN films for superconducting coplanar waveguide resonators

R. Barends, J. Kelly, A. Megrant, 2013, 1306.2966.

Hole Taper Characterisation and Control in Laser Percussion Drilling

Lin Li, J. R. Crookall, Lin Li, 2002 .

Planar waveguide devices based on sol–gel-derived photopatternable hybrid material

S. Y. Lee, M. Chin, M. Qian, 2006 .

Correlation of the hydroxyl bond and wettability characteristics of a magnesia partially stabilised zirconia following CO2 laser irradiation

L. Hao, G. Lim, H. Zheng, 2004 .

Advances in laser materials processing: Technology, research and applications

Juan Pou, Jonathan Lawrence, David K. Y. Low, 2010 .

Direct noninterference cylindrical vector beam generation applied in the femtosecond regime

R. E. Burge, K. J. Moh, X.-C. Yuan, 2006 .

Fabrication of waveguides in Foturan by femtosecond laser

G. Lim, M. Ho, Z. L. Li, 2006 .

Influence of diffraction by a rectangular aperture on the aspect ratio of femtosecond direct-write waveguides.

X. Yuan, D. Low, K. Moh, 2005, Optics express.

Spatter removal characteristics and spatter prevention during laser percussion drilling of aerospace alloys

Lin Li, P. Byrd, D. Low, 2001 .

Direct writing of buried waveguides in hybrid organic-inorganic sol-gel by femtosecond laser pulses

G. Lim, C. Wong, Hongbo Xie, 2005 .

The formation of a hydroxyl bond and the effects thereof on bone-like apatite formation on a magnesia partially stabilized zirconia (MgO–PSZ) bioceramic following CO2 laser irradiation

L. Hao, K. Chian, G. Lim, 2004, Journal of materials science. Materials in medicine.

355 nm DPSS UV laser cutting of FR4 and BT/epoxy-based PCB substrates

X. C. Wang, X. Wang, Z. L. Li, 2008 .

Incorporation of tin in boron doped silicon for reduced deactivation of boron during post-laser-anneal rapid thermal processing

Y. Yeo, G. Samudra, K. Tan, 2007 .