C. Felhő

发表

The effect of the shape of chip cross section on cutting force and roughness when increasing feed in face milling

J. Kundrák, I. Deszpoth, K. Gyáni, 2017 .

Comparison of Theoretical and Real Surface Roughness in Face Milling with Octagonal and Circular Inserts

János Kundrák, J. Kundrák, C. Felhő, 2013 .

Preliminary investigations for the effect of cutting tool edge geometry in high-feed face milling

B. Karpuschewski, D. Borysenko, J. Kundrák, 2018 .

Analysis of the General Tool Life Function of Cutting Tools by Application of the Catastrophe-Theory

Z. Palmai, J. Kundrák, C. Felhő, 2021, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.

Theoretical Roughness Modeling of Hard Turned Surfaces Considering Tool Wear

G. Varga, C. Felhő, 2022, Machines.

The energetic characteristics of milling with changing cross-section in the definition of specific cutting force by FEM method

B. Karpuschewski, Z. Palmai, D. Borysenko, 2021 .

Topography of the machined surface in high performance face milling

János Kundrák, J. Kundrák, C. Felhő, 2018 .

2D FEM Investigation of Residual Stress in Diamond Burnishing

G. Varga, C. Felhő, 2022, Journal of Manufacturing and Materials Processing.

CAD-Based Modelling of Surface Roughness in Face Milling

J. Kundrák, C. Felhő, 2014 .

Flat diamond sliding burnishing surface roughness investigation

C. Felhő, I. Pásztor, Frezgi Tesfom, 2022, Multidiszciplináris tudományok.

Investigation of cutting force components and surface roughness in face milling with different cutting ratios

C. Felhő, Frezgi Tesfom, 2022, Mérnöki és Informatikai Megoldások.

Influence of cutting ratio and tool macro geometry on process characteristics and workpiece conditions in face milling

B. Karpuschewski, D. Borysenko, J. Kundrák, 2019, CIRP Journal of Manufacturing Science and Technology.

Effect of Depth of Cut and Feed Rate on the Forces in Face Milling

C. Felhő, M. Akkad, 2019, MultiScience - XXXIII. microCAD International Multidisciplinary Scientific Conference.

Analysis and Prediction of Roughness of Face Milled Surfaces using CAD Model

J. Kundrák, C. Felhő, A. Nagy, 2022, MANUFACTURING TECHNOLOGY.

Effects of Setting Errors (Insert Run-Outs) on Surface Roughness in Face Milling When Using Circular Inserts

J. Kundrák, C. Felhő, 2018 .

3D Roughness Parameters of Surfaces Face Milled by Special Tools

János Kundrák, J. Kundrák, C. Felhő, 2016 .

Characterization of Topography of Cut Surface Based on Theoretical Roughness Indexes

J. Kundrák, C. Felhő, 2011 .

Surface Roughness Modelling in Face Milling

János Kundrák, Bernhard Karpuschewski, Csaba Felhő, 2015 .

A Method for the Determination of Theoretical Roughness in Face Milling Considering the Run-Out of the Inserts

J. Kundrák, C. Felhő, 2017 .

ANOVA Analysis and L9 Taguchi Design for Examination of Flat Slide Burnishing of Unalloyed Structural Carbon Steel

G. Varga, C. Felhő, Frezgi Tesfom, 2023, Journal of Manufacturing and Materials Processing.

Effect of Shape of Cutting Edge on Face Milled Surface Topography

J. Kundrák, C. Felhő, A. Nagy, 2019, Lecture Notes in Mechanical Engineering.

Metal Additive Manufacturing in Automotive Industry: A Review of Applications, Advantages, and Limitations

C. Felhő, Ziya Mehdiyev, 2023, Materials Science Forum.

Application of 2D-3D Surface Geometrical Features in Tribological Analysis of Ceramics and Ceramic Layers

M. Maros, C. Felhő, Z. Vass, 2015 .

Investigation of the transient change of the cutting force during the milling of C45 and X5CrNi18-10 steel taking into account the dynamics of the electro-mechanical measuring system

Z. Palmai, J. Kundrák, C. Felhő, 2024, The International Journal of Advanced Manufacturing Technology.