D. Froelich

发表

Cost modeling of lithium‐ion battery cells for automotive applications

S. Martinet, Gaëtan Patry, A. Romagny, 2015 .

Addition of X-ray fluorescent tracers into polymers, new technology for automatic sorting of plastics : proposal for selecting some relevant tracers

Elisabeth Maris, Daniel Froelich, Feliks Bezati, 2011 .

Heterogeneous Combustion of Residual Coke Particle

J. Lahaye, D. Froelich, G. Prado, 1987 .

High shear dispersion of tracers in polyolefins for improving their detection

D. Froelich, V. Massardier, E. Maris, 2015 .

Life Cycle Assessment of a milk protein fractionation process: Contribution of the production and the cleaning stages at unit process level

M. Rabiller-Baudry, D. Froelich, G. Gésan-Guiziou, 2019, Separation and Purification Technology.

Glass transition temperature of ideal polymeric networks

D. Froelich, D. Daveloose, F. Rietsch, 1976 .

Soot formation and burnout during the combustion of dispersed pulverized coal particles

A. Sarofim, J. Beér, D. Froelich, 1988 .

Droplet deformation in immiscible polymer blends during transient uniaxial elongational flow

R. Muller, D. Froelich, B. Ernst, 1996 .

Compensation of the negative effects of micro-encapsulated phase change materials by incorporating metakaolin in geopolymers based on blast furnace slag

S. Bonnet, A. Khalifa, A. Khelidj, 2022, Construction and Building Materials.

Effect of metakaolin addition on the mechanical performance of granulated blast furnace slag based geopolymer mortar with micro-encapsulated phase change materials

S. Bonnet, A. Khalifa, A. Khelidj, 2021 .

A qualitative, quantitative or mixed approach to deal with uncertainty in Life Cycle Assessment of complex systems: towards a selective integration of uncertainty according to LCA objectives

Y. Leroy, D. Froelich, 2020 .

Polymer chain conformation in the melt during steady elongational flow as measured by SANS. Temporary network model

R. Muller, D. Froelich, C. Picot, 1990 .

Viscoelastic Properties and Morphology of Two‐Phase Polypropylene/Polyamide 6 Blends in the Melt. Interpretation of Results with an Emulsion Model

P. Scholz, R. Muller, D. Froelich, 1989 .

Experimental study of the miscibility of ABS/PC polymer blends and investigation of the processing effect

A. Tcharkhtchi, Z. Ortega, D. Froelich, 2017 .

Study of three-dimensional polystyrene networks containing linear chains: 2. Relaxation spectrum of linear chains

D. Froelich, F. Rietsch, A. Brault, 1978 .

New extensional rheometer for elongational viscosity and flow birefringence measurements: some results on polystyrene melts

R. Muller, D. Froelich, 1985 .

Determination of crosslinking density of polymer networks by mechanical data in simple extension and by swelling degree at equilibrium

R. Muller, D. Froelich, Y. Zang, 1989 .

Influence of molecular weight distribution on viscoelastic constants of polymer melts in the terminal zone. New blending law and comparison with experimental data

R. Muller, D. Froelich, Y. Zang, 1987 .

Tensile stress and recoverable strain measurements on polystyrene melts. Interpretation of results in terms of rubberlike elasticity

R. Muller, D. Froelich, Y. Zang, 1987 .

Characterizing plastics originating from WEEE: A case study in France

Daniel Froelich, Elisabeth Maris, Philippe Wavrer, 2015 .

Polymer tracer detection systems with UV fluorescence spectrometry to improve product reyclability

A. Aoussat, E. Naffrechoux, D. Froelich, 2012 .

A study on the dispersion, preparation, characterization and photo-degradation of polypropylene traced with rare earth oxides

D. Froelich, F. Bezati, V. Massardier, 2011 .

Viscoelastic Properties of Polydimethylsiloxane‐Polyoxyethylene Blends in the Melt. Emulsion Model

R. Muller, D. Graebling, D. Froelich, 1989 .

Use of LCA to evaluate the environmental benefits of substituting chromic acid anodizing (CAA)

Daniel Froelich, Erwan Harscoet, D. Froelich, 2008 .

Physical and Chemical Characterization of Automotive Shredder Residues

L. Delfosse, D. Lanoir, G. Trouvé, 1997 .

Influence of deformation on the physical ageing of polycarbonate

D. Froelich, C. Goett, R. Pixa, 1985 .

Integrating ecodesign by conducting changes in SMEs

Gwenola Bertoluci, Stephane Le Pochat, Daniel Froelich, 2006 .

New representation of the true stress for uniaxial extension of crosslinked rubbers

R. Muller, D. Froelich, Y. Zang, 1986 .

Elastic behaviour of ideal polystyrene networks

D. Froelich, F. Rietsch, 1975 .

Elaboration and Characterization of Traced Polypropylene with Rare Earth Oxides for Automatic Identification and Sorting of End-of-Life Plastics

D. Froelich, F. Bezati, V. Massardier, 2010 .

Addition of tracers into the polypropylene in view of automatic sorting of plastic wastes using X-ray fluorescence spectrometry.

D. Froelich, F Bezati, D Froelich, 2010, Waste management.

Qualitative and quantitative approaches dealing with uncertainty in life cycle assessment (LCA) of complex systems: towards a selective integration of uncertainty according to LCA objectives

Y. Leroy, D. Froelich, Y. Leroy, 2010 .

CRITICAL ANALYSIS OF EXISTING RECYCLABILITY ASSESSMENT METHODS FOR NEW PRODUCTS IN ORDER TO DEFINE A REFERENCE METHOD

Elisabeth Maris, Daniel Froelich, D. Froelich, 2013 .

Elisabeth MARIS, Daniel FROELICH-CRITICAL ANALYSIS OF EXISTING RECYCLABILITY ASSESSMENT METHODS FOR NEW PRODUCTS IN ORDER TO DEFINE A REFERENCE

D. Froelich, E. Maris, 2015 .

State of the art of plastic sorting and recycling : Feedback to vehicle design

Nizar Haoues, Elisabeth Maris, Daniel Froelich, 2007 .

Predictive coalescence modeling of particles from different polymers: application to PVDF and PMMA pair

A. Tcharkhtchi, Z. Ortega, D. Froelich, 2017, Journal of Materials Science.

Influence of deformation on physical aging of polycarbonate

D. Froelich, T. Gay, B. Grisoni, 1986 .

Effects of microencapsulated phase change materials on chloride ion transport properties of geopolymers incorporating slag and, metakaolin, and cement-based mortars

N. Maranzana, S. Bonnet, A. Khalifa, 2023, Journal of Building Engineering.

Physical ageing of polycarbonate and PMMA by dynamic mechanical measurements

R. Duckett, D. Froelich, L. Guerdoux, 1984 .

ReSICLED: a new Recovery Conscious Design method for complex products based on a multicriteria assessment of the recoverability.

Fabrice Mathieux, Pierre Moszkowicz, Daniel Froelich, 2008 .

Comparison of milk protein separation processes by life cycle analysis: chromatography vs filtration

Geneviève Gésan-Guiziou, Murielle Rabiller-Baudry, S. Omont, 2012 .

Developing a tool for environmental impact assessment and eco-design for ships

M Prinĉaud, A Cornier, D Froélich, 2010 .

Drop deformation in polymer blends during uniaxial elongational flow

R. Muller, D. Froelich, I. Delaby, 1995 .

Development of a new methodology to integrate ELV treatment limits into requirements for metal automotive part design

Yann Leroy, Nizar Haoues, Daniel Froelich, 2007 .