Daoyang Han

发表

Ultralight lamellar amorphous carbon foam nanostructured by SiC nanowires for tunable electromagnetic wave absorption

Lai-fei Cheng, H. Mei, K. Dassios, 2017 .

Porous SiCnw/SiC ceramics with unidirectionally aligned channels produced by freeze-drying and chemical vapor infiltration

Lai-fei Cheng, H. Mei, Jin-lei Gu, 2017 .

Improvement of the electromagnetic shielding properties of C/SiC composites by electrophoretic deposition of carbon nanotube on carbon fibers

Lai-fei Cheng, H. Mei, Shanshan Xiao, 2016 .

Anisotropic compressive properties of CNT/SiC composites produced by direct matrix infiltration of vertically aligned CNT forests

Lai-fei Cheng, H. Mei, Shanshan Xiao, 2017 .

CNT/SiC composites produced by direct matrix infiltration of self-assembled CNT sponges

Lai-fei Cheng, H. Mei, Shanshan Xiao, 2017, Journal of Materials Science.

Dramatic increase in electrical conductivity in epoxy composites with uni-directionally oriented laminae of carbon nanotubes

Lai-fei Cheng, Juanli Deng, H. Mei, 2016 .

Porous (SiCw-Si3N4w)/(Si3N4-SiC) composite with enhanced mechanical performance fabricated by 3D printing

Lai-fei Cheng, H. Mei, Shanshan Xiao, 2018, Ceramics International.

Position–sensitive electric property of flash–sintered 3Y–TZP ceramics based on DC bias assisted impedance analysis

H. Lu, Hongliang Xu, Hailong Wang, 2021, Ceramics International.

In-plane shear strength of a carbon/carbon composite at different loading rates and temperatures

Daoyang Han, M. Li, Chengyu Zhang, 2011 .

Temperature-sensing performance of polymer-derived SiAlCN ceramics up to 1000 °C

Hailong Wang, G. Shao, Daoyang Han, 2022, Ceramics International.

3D-printed oblique honeycomb Al2O3/SiCw structure for electromagnetic wave absorption

Lai-fei Cheng, H. Mei, Shanshan Xiao, 2019, Chemical Engineering Journal.

Compacting CNT sponge to achieve larger electromagnetic interference shielding performance

F. Wei, Lai-fei Cheng, H. Mei, 2018 .

Enhanced electromagnetic shielding property of C/SiC composites via electrophoretically-deposited CNTs onto SiC coating

Lai-fei Cheng, H. Mei, Kun Yang, 2018, Ceramics International.

Strengthening of C/SiC Composites by Electrophoretic Deposition of CNTs on a SiC Coating

Lai-fei Cheng, H. Mei, Kun Yang, 2018, Journal of Materials Engineering and Performance.

Enhanced piezoresistivity of polymer-derived SiCN ceramics by regulating divinylbenzene-induced free carbon

Rui Zhang, H. Lu, Hongliang Xu, 2022, Ceramics International.

B, N-dual doped sisal-based multiscale porous carbon for high-rate supercapacitors

Lai-fei Cheng, Xiaowen Yuan, Daoyang Han, 2019, RSC advances.

Mechanical, structural and oxidation resistance enhancement of carbon foam by in situ grown SiC nanowires

H. Mei, Guoke Zhao, Daoyang Han, 2016 .

A review on the processing technologies of carbon nanotube/silicon carbide composites

Lai-fei Cheng, H. Mei, K. Dassios, 2018, Journal of the European Ceramic Society.

Depositing CNTs on the interface and surface of C/PyC/SiCs for tunable mechanical and electromagnetic properties

Lai-fei Cheng, H. Mei, K. Dassios, 2019 .

Tailoring fibre lengths to fabricate a highly permeable SiC fibre porous medium for more efficient combustion

Lai-fei Cheng, H. Mei, Yawei Xu, 2019, Composites Part B: Engineering.

Mechanical behavior of ZrO2 ceramics in the post-flash stage

Rui Zhang, H. Lu, Hongtian He, 2023, Materials Science and Engineering: A.

Structure regulation and microwave absorption property of SiCN ceramic aerogels produced by catalytic pyrolysis

H. Lu, Hongliang Xu, Hailong Wang, 2021, Ceramics International.

SiC encapsulated Fe@CNT ultra-high absorptive shielding material for high temperature resistant EMI shielding

Lai-fei Cheng, H. Mei, Xuchun Gui, 2019, Ceramics International.

Electromagnetic shielding properties of carbon‐rich chemical vapor infiltration‐prone silicon carbide matrix composites

Lai-fei Cheng, H. Mei, Shanshan Xiao, 2018 .

Temperature dependency of interlaminar shear strength of 2D-C/SiC composite

H. L. Wang, Daoyang Han, M. Li, 2012 .

Effect of electrophoretic deposition of carbon nanotubes on the tensile behaviors of carbon fiber tow

Lai-fei Cheng, H. Mei, Shanshan Xiao, 2016 .

Anisotropic compressive properties of porous CNT/SiC composites produced by direct matrix infiltration of CNT aerogel

Lai-fei Cheng, H. Mei, Shanshan Xiao, 2017 .

Enhancing the tensile properties of SiC composites by a two-dimensional CNT film

Lai-fei Cheng, H. Mei, Daoyang Han, 2020 .

Macroscopic carbon nanotube assembly/silicon carbide matrix composites produced by gas phase route

Lai-fei Cheng, H. Mei, Shanshan Xiao, 2019, Advanced Composites and Hybrid Materials.

Microwave induced in-situ formation of SiC nanowires on SiCNO ceramic aerogels with excellent electromagnetic wave absorption performance

H. Lu, Hongliang Xu, Hailong Wang, 2021, Journal of Advanced Ceramics.

Sandwich-like SiCnw/C/Si3N4 porous layered composite for full X-band electromagnetic wave absorption at elevated temperature

Lai-fei Cheng, H. Mei, Shanshan Xiao, 2020 .

A direct chemical vapor infiltration route for a carbon nanotube/silicon carbide thermal protection system

Lai-fei Cheng, H. Mei, Shanshan Xiao, 2018 .

Three-dimensional CNT lamellae reinforced SiC for enhanced mechanical and electromagnetic shielding properties

Lai-fei Cheng, Yun-Hsing Fan, H. Mei, 2020 .

3D nano-network structured SiCN ceramic aerogels on mullite fiber felts for electromagnetic wave absorption

Hong Wang, Rui Zhang, G. Shao, 2022, Ceramics International.

3D printed SiC nanowire reinforced composites for broadband electromagnetic absorption

Lai-fei Cheng, H. Mei, Shanshan Xiao, 2019, Ceramics International.

Highly conductive and high-strength carbon nanotube film reinforced silicon carbide composites

Lai-fei Cheng, H. Mei, Shanshan Xiao, 2017 .

Effect of impact energy on damage resistance and mechanical property of C/SiC composites under low velocity impact

Lai-fei Cheng, H. Mei, Yawei Xu, 2017 .

Failure and strength of 2D-C/SiC composite under in-plane shear loading at elevated temperatures

Daoyang Han, M. Li, Chengyu Zhang, 2011 .

New insights for strengthening and toughening mechanisms of dislocation in B_4C–ZrB_2–SiC composites using vacuum hot pressing assisted by reaction sintering (VHP-RS)

Rui Zhang, Hongliang Xu, Hailong Wang, 2023, Journal of Materials Science.

A novel sintering method of Al2O3/SiCw ceramic composites with improved wear resistance: Oscillatory pressure‐assisted sinter forging

Hong Wang, Rui Zhang, Pengbo Zhao, 2023, Ceramics International.