S. Ban

发表

Taira Kobayashi, T. Miyazaki, Takashi Nakamura, 2013, Journal of prosthodontic research.

Correlations between shape/size/oxidation of iron particle and electromagnetic properties of Fe-silicone rubber composites

Jung Min Lee, Soonil Lee, D. Kim, 2020 .

Improving biocompatibility of zirconia surface by incorporating Ca ions.

T. Kawai, S. Ban, M. Ando, 2015, Dental materials journal.

Effect of preparation route on the degradation behavior and ion releasability of siloxane-poly(lactic acid)-vaterite hybrid nonwoven fabrics for guided bone regeneration.

A. Obata, T. Kasuga, Y. Ota, 2011, Dental materials journal.

Fracture toughness of dental zirconia before and after autoclaving

S. Ban, Masahiro Nawa, Y. Suehiro, 2010 .

Relation between biaxial flexure strength and phase transformation of zirconia with surface treatments( Ceramics for Biomedical Applications in Asian Countries)

S. Ban, D. Yamashita, Hideo Sato, 2008 .

Mechanical properties of dental zirconia ceramics changed with sandblasting and heat treatment.

G. Pezzotti, S. Ban, Masahiro Nawa, 2008, Dental materials journal.

Properties of Functionally Gradient Composite Consisting of Hydroxyapatite Containing Glass Coated Titanium and Characters for Bioactive Implant

S. Ban, S. Maruno, H. Iwata, 1992 .

Effect of various visible light photoinitiators on the polymerization and color of light-activated resins.

S. Ban, Hideo Takahashi, H. Arikawa, 2009, Dental materials journal.

Cellular compatibility of a gamma-irradiated modified siloxane-poly(lactic acid)-calcium carbonate hybrid membrane for guided bone regeneration.

T. Kasuga, S. Ban, K. Noguchi, 2011, Dental materials journal.

Biocompatibility of apatite-coated titanium mesh prepared by hydrothermal-electrochemical method.

Y. Izumi, S. Ban, A. Yuda, 2005, Dental materials journal.

Calcium phosphate precipitation on the surface of HA-G-Ti composite under physiologic conditions.

S. Ban, S. Maruno, H. Itoh, 1994, Journal of biomedical materials research.

Calcium-ion incorporation into titanium surfaces accompanied by electrochemical apatite-deposition.

A. Kamiya, S. Ban, T. Sonoda, 2002, Dental materials journal.

Site specific mineral composition and microstructure of human supra-gingival dental calculus.

C. Robinson, S. Ban, H. Nakagaki, 2008, Archives of oral biology.

Effect of temperature on morphology of electrochemically-deposited calcium phosphates.

A. Harada, S. Ban, S. Maruno, 1996, Dental materials journal.

Crystal phase of fibrous calcium phosphates prepared with sodium alginate.

S. Ban, Y. Kimura, N. Kato, 1995, Dental materials journal.

Effect of temperature on electrochemical deposition of calcium phosphate coatings in a simulated body fluid.

S. Ban, S. Maruno, 1995, Biomaterials.

Photodoping Sensitivity of Ag into Amorphous Ge30S70 Films

S. Ban, S. Maruno, 1980 .

Adhesion Properties of Human Oral Epithelial-Derived Cells to Zirconia.

Toshihide Noguchi, Tatsushi Kawai, Seiji Ban, 2016, Clinical implant dentistry and related research.

Influence of Test Method on Failure Stress of Brittle Dental Materials

K J Anusavice, S. Ban, S Ban, 1990, Journal of dental research.

Effect of loading conditions on bi-axial flexure strength of dental cements.

J Hasegawa, K J Anusavice, S. Ban, 1992, Dental materials : official publication of the Academy of Dental Materials.

Morphological regulation and crystal growth of hydrothermal-electrochemically deposited apatite.

S. Ban, J. Hasegawa, 2002, Biomaterials.

Phase transformation of octacalcium phosphate in vivo and in vitro.

S. Ban, T. Jinde, J. Hasegawa, 1992, Dental materials journal.

Reactivity of zirconia with phosphate-bonded investments for hot-pressing.

Yoshinori Nakamura, T. Kawai, Yoshinobu Tanaka, 2015, Journal of prosthodontic research.

Morphology and microstructure of electrochemically deposited calcium phosphates in a modified simulated body fluid.

S. Ban, S. Maruno, 1998, Biomaterials.

Hydrothermal-electrochemical deposition of hydroxyapatite.

S. Ban, S. Maruno, 1998, Journal of biomedical materials research.

pH Distribution Around the Electrode During Electrochemical Deposition Process for Producing Bioactive Apatite

S. Ban, S. Maruno, 1999 .

Effect of electrochemically deposited apatite coating on bonding of bone to the HA-G-Ti composite and titanium.

A. Harada, S. Ban, S. Maruno, 1997, Journal of biomedical materials research.

Factors affecting the transformation of octacalcium phosphate to apatite in vitro.

S. Ban, M. Matsuura, J. Hayashizaki, 1993, Dental materials journal.

REACTIVITY OF HYDROXYAPATITE, α-TRICALCIUM PHOSPHATE AND TETRACALCIUM PHOSPHATE WITH ALUMINO-BOROSILICATE GLASS

S. Ban, S. Maruno, J. Hayashizaki, 1996 .

Bactericidal efficacy of glycine-type amphoteric surfactant as a denture cleaner and its influence on properties of denture base resins.

S. Ban, M. Hashiguchi, E. Nagaoka, 2009, Dental materials journal.

Heat of polymerization of dimethacrylate monomers investigated by isothermal DSC measurement.

S. Ban, J. Hasegawa, 1984, Dental materials journal.

pH determinations on the surface of luting cements. II. Effects of test conditions.

S. Ban, J. Hasegawa, M. Iwai, 1986, Dental materials journal.

pH determinations on the surface of luting cements. I. A test method.

S. Ban, H. Fukui, J. Hasegawa, 1985, Dental materials journal.

pH determinations on the surface of luting cements. III. pH change and setting reaction of zinc phosphate cements.

S. Ban, A. Lacy, J. Hasegawa, 1986, Dental materials journal.

A zinc phosphate cement based on ZnO-Al2O3 powders prepared by Co-precipitation method. Effect of calcium and fluorine addition.

S. Ban, S. Tsuruta, J. Hasegawa, 1988, Dental materials journal.

DEVELOPMENT OF ELECTROCHEMICAL APATITE-COATING ON TITANIUM FOR BIOLOGICAL APPLICATION

S. Ban, 2004 .

Setting characteristics of silicone-based resilient denture liners.

M. Inoue, S. Ban, H. Arikawa, 2004, Dental materials journal.

Mechanical properties and bond strength of silicone-based resilient denture liners.

M. Inoue, S. Ban, H. Minami, 2005, Dental materials journal.

Y2O3:Eu3+ Nanophosphor-Coated Mica or TiO2/Mica as Red-Emitting Pearl Pigment: Coating Factors, Luminescent and Gloss Properties

D. Kim, Byung-Ki Choi, S. Ban, 2021, Applied Sciences.

Optimization of dispersed LaPO4:Tb nanosol and their photoluminescence properties

D. Kim, S. Ban, M. Ullah, 2019, Optical Materials.

Interfacial oxidations of pure titanium and titanium alloys with investments.

H. Nakamura, S. Ban, H. Fukui, 2000, Dental materials journal.

Hydrothermal-electrochemical deposition of calcium phosphates on various metals.

S. Ban, K. Matsuo, J. Hasegawa, 1999, Dental materials journal.

Hydroxyapatite coating on zirconia using glass coating technique

Seiji Ban, S. Ban, Motoharu Miyamoto, 2008 .

Surface modification of titanium by etching in concentrated sulfuric acid.

Hiroshi Kono, Seiji Ban, H. Kono, 2006, Dental materials : official publication of the Academy of Dental Materials.

Flexural properties of denture base polymers reinforced with a glass cloth-urethane polymer composite.

S. Ban, H. Arikawa, K. Fujii, 2004, Dental materials : official publication of the Academy of Dental Materials.

Mechanical properties of reinforced denture base resin: the effect of position and the number of woven glass fibers.

S. Ban, H. Arikawa, K. Fujii, 2002, Dental materials journal.

Deformation and flexural properties of denture base polymer reinforced with glass fiber sheet.

S. Ban, H. Arikawa, K. Fujii, 2005, Dental materials journal.

Impact strength of acrylic denture base resin reinforced with woven glass fiber.

S. Ban, H. Arikawa, K. Fujii, 2003, Dental materials journal.

Flexural properties of ethyl or methyl methacrylate-UDMA blend polymers.

S. Ban, H. Arikawa, K. Fujii, 2010, Dental materials journal.

Mechanical properties of woven glass fiber-reinforced composites.

S. Ban, H. Arikawa, K. Fujii, 2006, Dental materials journal.

Fracture strength testing of crowns made of CAD/CAM composite resins.

T. Kawai, J. Takebe, S. Ban, 2018, Journal of prosthodontic research.

Light-curing reinforcement for denture base resin using a glass fiber cloth pre-impregnated with various urethane oligomers.

S. Ban, H. Arikawa, K. Fujii, 2004, Dental materials journal.

Synthesis of Octacalcium Phosphate and its Transformation to Apatite

S. Ban, S. Maruno, J. Hasegawa, 1996 .

Effect of surface roughness on initial responses of osteoblast-like cells on two types of zirconia.

Seiji Ban, Y. Izumi, S. Ban, 2009, Dental materials journal.

Surface properties and biocompatibility of acid-etched titanium.

Seiji Ban, Y. Izumi, S. Ban, 2008, Dental materials journal.

Micro-CT Analysis of New Bone Formation Around Implant with Electrochemically Deposited Apatite

S. Ban, S. Tsuruta, H. Arikawa, 2002 .

Fabrication and Properties of Functionally Gradient Bioactive Composites Comprising Hydroxyapatite Containing Glass Coated Titanium

S. Ban, S. Maruno, J. Hasegawa, 1999 .

Bone Bonding Studies and Implant Application of HA-G-Ti Functionally Gradient Composites

S. Ban, S. Maruno, H. Itoh, 1999 .

Reliability and properties of core materials for all-ceramic dental restorations

Seiji Ban, S. Ban, 2008 .

Chemical durability of high translucent dental zirconia.

S. Ban, 2020, Dental materials journal.

Mechanical properties of an experimental soft lining material based on urethane oligomer.

S. Ban, H. Arikawa, K. Fujii, 2005, Dental materials journal.

Mechanical properties and cytotoxicity of experimental soft lining materials based on urethane acrylate oligomers.

S. Ban, K. Tomita, M. Tokuda, 2009, Dental materials journal.

Comparison of the Mechanical Properties of 2 Prosthetic Mini-implants

Seiji Ban, S. Ban, Takahito Kanie, 2004, Implant dentistry.

Effects of adding methacrylate monomers on viscosity and mechanical properties of experimental light-curing soft lining materials based on urethane (meth)acrylate oligomers.

S. Ban, H. Arikawa, K. Fujii, 2008, Dental materials journal.

Color change in acrylic denture base resin reinforced with wire mesh and glass cloth.

S. Ban, H. Arikawa, K. Fujii, 2003, Dental materials journal.

Optical properties of paint-on resins for shade modification of crown and bridge resins--light transmittance characteristics--.

S. Ban, T. Homma, Hideo Takahashi, 2003, Dental materials journal.

Light-attenuating effect of dentin on the polymerization of light-activated restorative resins.

Koichi Fujii, Seiji Ban, Hiroyuki Arikawa, 2004, Dental materials journal.

Effect of filler properties in composite resins on light transmittance characteristics and color.

S. Ban, Hideo Takahashi, H. Arikawa, 2007, Dental materials journal.

Mechanical properties of a soft liner made of methacrylate monomers and urethane oligomers.

S. Ban, H. Arikawa, K. Fujii, 2007 .

Bioactive apatite coating on titanium using an alternate soaking process.

Hiroshi Kono, Seiji Ban, H. Kono, 2007, Dental materials journal.

Oriented Needle-Like Apatite and Biodegradable Copolymer Composite Membranes

S. Ban, Hiroshi Nakamura, T. Kawai, 2002 .

Effect of inhomogeneity of light from light curing units on the surface hardness of composite resin.

S. Ban, Hideo Takahashi, H. Arikawa, 2008, Dental materials journal.

CHARACTERIZATION OF APATITE IN THE TRANSLUCENT DENTIN OF SINGLE ROOT

S. Ban, N. Ohno, L. Saruwatari, 2000 .

Physical Properties of Composite Membrane Containing Apatite and Poly-Lactic Acid /Poly-Glycolic Acid Copolymer In Vitro

S. Ban, Hiroshi Nakamura, T. Kawai, 2005 .

Development of Biodegradable Composite Membrane Containing Oriented Needle-Like Apatites

T. Kawai, S. Ban, Hiroshi Nakamura, 2004 .

Biocompatibility of composite membrane consisting of oriented needle-like apatite and biodegradable copolymer with soft and hard tissues in rats.

S. Ban, Hiroshi Nakamura, S. Tsuruta, 2004, Dental materials journal.

Preparation of a Composite Membrane Containing Biologically Active Materials

S. Ban, Hiroshi Nakamura, T. Kawai, 2003 .

Light transmittance characteristics and refractive indices of light-activated pit and fissure sealants.

S. Ban, Hideo Takahashi, H. Arikawa, 2010, Dental materials journal.

Surface damages of zirconia by Nd:YAG dental laser irradiation.

S. Ban, Y. Minesaki, Yuji Okuda, 2010, Dental materials journal.

Radio-opacity of core materials for all-ceramic restorations.

Hiroshi Kono, Seiji Ban, H. Kono, 2010, Dental materials journal.

Classification and Properties of Dental Zirconia as Implant Fixtures and Superstructures

S. Ban, 2021, Materials.

HRTEM observation of bonding interface between Ce-TZP/Al2O3 nanocomposite and porcelain.

Tatsushi Kawai, Hiroshi Kono, Seiji Ban, 2014, Dental materials journal.

Effect of Coloring on Mechanical Properties of Dental Zirconia

Hiroshi Kono, Takayuki Suzuki, Tatsushi Kawai, 2014 .

Biaxial flexure strength and low temperature degradation of Ce-TZP/Al2O3 nanocomposite and Y-TZP as dental restoratives.

Seiji Ban, S. Ban, Hideo Sato, 2008, Journal of Biomedical Materials Research. Part B - Applied biomaterials.

Mechanical Properties of Zirconia/Alumina Nano-Composite after Soaking in Various Water-Based Conditions

Seiji Ban, S. Ban, Masahiro Nawa, 2006 .

Optical and color stabilities of paint-on resins for shade modification of restorative resins.

S. Ban, T. Homma, Hideo Takahashi, 2004, Dental materials journal.

Tooth brush abrasion of paint-on resins for shade modification of crown and bridge resins.

S. Ban, K. Fujii, J. Mccabe, 2003, Dental materials journal.

A method for improving the light intensity distribution in dental light-curing units.

S. Ban, Hideo Takahashi, Y. Minesaki, 2011, Dental materials journal.

Effect of radiation light characteristics on surface hardness of paint-on resin for shade modification.

S. Ban, H. Arikawa, K. Fujii, 2005, Dental materials journal.

Adhesive strength of paint-on resins to crown and bridge composites.

S. Ban, H. Arikawa, K. Fujii, 2004, Dental materials journal.

Toothbrush abrasion of paint-on resins for shade modification and crown resins: effect of water absorption.

S. Ban, H. Arikawa, K. Fujii, 2004, Dental materials journal.

Heat curing behavior of light-cured composite resins investigated by dynamic differential scanning calorimetry.

S. Ban, J. Hasegawa, Y. Takahashi, 1990, Dental materials journal.

Leaching behaviors of computer-aided design/computer-aided manufacturing composite resin component elements immersed in water.

T. Kawai, S. Ban, S. Tsuruta, 2019, Journal of prosthodontic research.

Bonding strength and durability of alkaline-treated titanium to veneering resin.

Takuo Tanaka, S. Ban, H. Arikawa, 2004, Dental materials journal.

Effect of alkaline treatment of pure titanium and its alloys on the bonding strength of dental veneering resins.

S. Ban, 2003, Journal of Biomedical Materials Research. Part A.

Acid etching of titanium for bonding with veneering composite resins.

H. Kono, S. Ban, Hideo Sato, 2006, Dental materials journal.

Real-time monitoring of apatite deposition using electrochemical quartz crystal microbalance.

S. Ban, 2003, Dental materials journal.

Composite Mesh Consisting of Titanium, Apatite and Biodegradable Copolymer

Y. Izumi, S. Ban, H. Arikawa, 2003 .

Characterization and Biological Application of Hydroxyapatite-Glass-Titanium (HA-G-Ti) Functional Gradient Composite Material

Kenji Yamada, N. Ishiguro, Y. Hasegawa, 1999 .

Effect of Grinding, Sandblasting and Heat Treatment on the Phase Transformation of Zirconia Surface

S. Ban, Y. Suehiro, Hideo Sato, 2007 .

Effect of Sandblasting and Heat Treatment on Biaxial Flexure Strength of the Zirconia/Alumina Nanocomposite

S. Ban, Y. Suehiro, Hideo Sato, 2007 .

[Nickel solubility from nickel-chromium dental casting alloys for crown and bridge].

S. Ban, K. Hisada, T. Kitaoka, 1984, Shika zairyo, kikai = Journal of the Japanese Society for Dental Materials and Devices.

Early Cellular Responses of Osteoblast-Like Cells on Acid-Etching and Alkaline Treated Titanium

Y. Izumi, H. Kono, S. Ban, 2006 .

Effect of Sintering Condition, Sandblasting and Heat Treatment on Biaxial Flexure Strength of Zirconia

S. Ban, Y. Suehiro, H. Nakanishi, 2007 .

Modification of electrochemically deposited apatite using supercritical water.

S. Ban, J. Hasegawa, 2001, Dental materials journal.

Electrochemical corrosion behaviour of hydroxyapatite-glass-titanium composite.

S. Ban, S. Maruno, J. Hasegawa, 1991, Biomaterials.

Characterization and Stability of Bioactive HA-G-Ti Composite Materials and Bonding to Bone

S. Ban, T. Hanaichi, S. Maruno, 1994 .

Translucent and Highly Toughened Zirconia Suitable for Dental Restorations

T. Sugiyama, S. Ban, Yutaka Yasuoka, 2023, Prosthesis.

Bioactivity of the Two Kinds of Biodegradable Composite Membrane Containing Oriented Needle-Like Apatite

S. Ban, Hiroshi Nakamura, T. Kawai, 2005 .

Effect of Electrochemical Deposition of Calcium Phosphate on Bonding of the HA-G-Ti Composite and Titanium to Bone

A. Harada, S. Ban, S. Maruno, 1994 .

Micro-observation and characterization of bonding between bone and HA-glass-titanium functionally gradient composite.

T. Ishikawa, S. Ban, S. Maruno, 1991, Biomaterials.

Analysis of luting cement powders and liquids.

S. Ban, J. Hasegawa, Y. Takahasi, 1985, Dental materials journal.

Microstructure and homogeneity of dental porcelain frits.

S. Ban, K. Matsuo, J. Hasegawa, 1998, Dental materials journal.

Contamination of dental zirconia before final firing: effects on mechanical properties.

H. Kono, T. Kawai, S. Ban, 2013, Dental materials journal.

Factors Affecting on the Bond Strength of Dental Zirconia to Veneering Porcelains

H. Kono, S. Ban, H. Arikawa, 2012 .

Surface Properties of Dental Zirconia after Clinical Grinding and Polishing

H. Kono, T. Kawai, S. Ban, 2012 .

Effect of autoclave treatment on bonding strength of dental zirconia ceramics to resin cements

Y. Yamasaki, S. Ban, Hideo Sato, 2010 .