J. Bowsher

发表

Metal-on-metal hip simulator study of increased wear particle surface area due to ‘severe’ patient activity

P. Williams, J. Shelton, J. Bowsher, 2006, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Surface damage after multiple dislocations of a 38-mm-diameter, metal-on-metal hip prosthesis.

I. Clarke, J. Bowsher, T. Donaldson, 2008, The Journal of arthroplasty.

Simulator Study of MOM using Steep-cup Flexion - A Clinically Relevant Incorporation of Intermittent Edge-loading

I. Clarke, J. Shelton, J. Bowsher, 2017 .

Risk of Impingement and Third-body Abrasion With 28-mm Metal-on-metal Bearings

I. Clarke, A. Brusson, J. Lazennec, 2014, Clinical orthopaedics and related research.

Characterization of protein degradation in serum-based lubricants during simulation wear testing of metal-on-metal hip prostheses.

I. Clarke, J. Bowsher, P. Williams, 2010, Journal of biomedical materials research. Part B, Applied biomaterials.

Co-Cr Head Roughness and its Effect on Wear of UHMWPE and XLPE Cups

I. Clarke, J. Bowsher, T. Donaldson, 2005 .

The clinical implications of metal debris release from the taper junctions and bearing surfaces of metal-on-metal hip arthroplasty: joint fluid and blood metal ion concentrations.

T. Joyce, D. Langton, J. Lord, 2016, The bone & joint journal.

Investigation of the Molecular Nature of Low-molecular-mass Cobalt(II) Ions in Isolated Osteoarthritic Knee-joint Synovial Fluid

J. Shelton, I. Chikanza, K. Tanner, 2004, Free radical research.

Aseptic lymphocyte-dominated vasculitis-associated lesions are related to changes in metal ion handling in the joint capsules of metal-on-metal hip arthroplasties

T. Joyce, D. Deehan, J. Holland, 2018, Bone & joint research.

A simulator study of adverse wear with metal and cement debris contamination in metal-on-metal hip bearings

I. Clarke, J. Bowsher, T. Donaldson, 2015, Bone & joint research.

Normal and Adverse Wear Patterns Created In-Vivo on Metal-on-Metal Surfaces—A Retrieval Study Representing Four Vendors

Thomas Donaldson, Christopher L. Peters, Edward J. McPherson, 2013 .

Material loss at the femoral head taper: A COMPARISON STUDY OF THE EXETER METAL‐ON‐POLYETHYLENE AND CONTEMPORARY METAL‐ON‐METAL TOTAL HIP ARTHROPLASTY

T. Joyce, D. Deehan, J. Holland, 2018, The bone & joint journal.

A comparison study of stem taper material loss at similar and mixed metal head‐neck taper junctions

T. Joyce, D. Deehan, J. Holland, 2017, The bone & joint journal.

Variation of mechanical properties and oxidation with radiation dose and source in highly crosslinked remelted UHMWPE.

D. V. Van Citters, J. Bowsher, Mitchell Fung, 2018, Journal of the mechanical behavior of biomedical materials.

Shorter, rough trunnion surfaces are associated with higher taper wear rates than longer, smooth trunnion surfaces in a contemporary large head metal‐on‐metal total hip arthroplasty system

T. Joyce, D. Deehan, D. Langton, 2015, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

What is a "normal" wear pattern for metal-on-metal hip bearings?

I. Clarke, P. Williams, J. Bowsher, 2009, Journal of biomedical materials research. Part B, Applied biomaterials.

Current concepts of metal-on-metal hip resurfacing.

I. Clarke, Tomoki Takahashi, J. Bowsher, 2005, The Orthopedic clinics of North America.

Profiling the third-body wear damage produced in CoCr surfaces by bone cement, CoCr, and Ti6Al4V debris: A 10-cycle metal-on-metal simulator test

I. Clarke, J. Bowsher, T. Donaldson, 2014, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Effect of ion implantation on the tribology of metal-on-metal hip prostheses.

J. Shelton, P. Williams, J. Nevelos, 2004, The Journal of arthroplasty.

"Severe" wear challenge to 36 mm mechanically enhanced highly crosslinked polyethylene hip liners.

I. Clarke, P. Williams, J. Bowsher, 2008, Journal of biomedical materials research. Part B, Applied biomaterials.

A hip simulator study of the influence of patient activity level on the wear of crosslinked polyethylene under smooth and roughened femoral conditions

Julia C. Shelton, J. G. Bowsher, J. Shelton, 2001 .

‘Severe’ wear challenge to ‘as-cast’ and ‘double heat-treated’ large-diameter metal-on-metal hip bearings

P. Williams, J. Shelton, J. Nevelos, 2006, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Opportunities and Challenges of Retrieval Analysis: The Role of Standardized Periprosthetic Tissue and Fluid Analysis for Assessing an Aggravated Host Response

S. Kurtz, D. Marinac-Dabic, Y. Torosyan, 2018, Beyond the Implant: Retrieval Analysis Methods for Implant Surveillance.

Is the synovial fluid cobalt-to-chromium ratio related to the serum partitioning of metal debris following metal-on-metal hip arthroplasty?

D. Langton, C. Harrington, J. Bowsher, 2019, Bone & joint research.