Lorenzo Ciani

发表

Failure modes, mechanisms and effect analysis on temperature redundant sensor stage

Marcantonio Catelani, Lorenzo Ciani, Matteo Venzi, 2018, Reliab. Eng. Syst. Saf..

Characterization of a low-cost and low-power environmental monitoring system

Marcantonio Catelani, Lorenzo Ciani, Alessandro Bartolini, 2020, 2020 IEEE International Instrumentation and Measurement Technology Conference (I2MTC).

Introduction to the Special Section of the 14th IMEKO TC10 Workshop on Technical Diagnostics

Marcantonio Catelani, Lorenzo Ciani, 2016 .

Analysis of ultracapacitors ageing in automotive application

Marcantonio Catelani, Lorenzo Ciani, Mirko Marracci, 2013, Microelectron. Reliab..

Measurements and characterization of air temperature sensors for weather stations

Marcantonio Catelani, Lorenzo Ciani, Roberto Scotto, 2016, 2016 IEEE International Instrumentation and Measurement Technology Conference Proceedings.

RBD Model-Based Approach for Reliability Assessment in Complex Systems

Lorenzo Ciani, Matteo Venzi, Marcantonio Catelani, 2019, IEEE Systems Journal.

Reliability assessment of UAV systems

Lorenzo Ciani, Fabio Leccese, Enrico Petritoli, 2017, 2017 IEEE International Workshop on Metrology for AeroSpace (MetroAeroSpace).

Analysis of the Influence of the GPS Errors Occurred While Collecting Electrode Coordinates on the Electrical Resistivity of Tumuli †

Marcantonio Catelani, Lorenzo Ciani, Giulia Guidi, 2020, Sensors.

Characterization of Inertial Measurement Units under Environmental Stress Screening

Antonio Pietrosanto, Marcantonio Catelani, Lorenzo Ciani, 2020, 2020 IEEE International Instrumentation and Measurement Technology Conference (I2MTC).

Optimization in performance-based logistics contracts

Lorenzo Ciani, Diego Galar, Julio C. O. Lopes, 2017, 2017 IEEE International Workshop on Metrology for AeroSpace (MetroAeroSpace).

A condition monitoring tool based on a FMECA and FMMEA combined approach in Oil&Gas applications

Marcantonio Catelani, Lorenzo Ciani, Matteo Venzi, 2016, 2016 IEEE International Instrumentation and Measurement Technology Conference Proceedings.

Failure rates sensitivity analysis using Monte Carlo simulation

Lorenzo Ciani, Matteo Venzi, Stefano Rossin, 2014 .

Matlab PV solar concentrator performance prediction based on triple junction solar cell model

Marcantonio Catelani, Lorenzo Ciani, Alberto Reatti, 2016 .

Diagnostic architecture: A procedure based on the analysis of the failure causes applied to photovoltaic plants

Lorenzo Ciani, Loredana Cristaldi, Marco Faifer, 2015 .

STATISTICAL ANALYSIS OF THE WORD ERROR RATE MEASUREMENT IN ANALOG-TO-DIGITAL CONVERTERS

Lorenzo Ciani, A. Zanobini, Marcantonio Catelani, 2009 .

Medium voltage power lines: Outages data analysis and modelling

Marcantonio Catelani, Lorenzo Ciani, A. Fossi, 2015 .

Frequency dependent failure region definition for supercapacitors

Marcantonio Catelani, Lorenzo Ciani, Mirko Marracci, 2014, 2014 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings.

Flow Rate AMS - Automatic Measurement System

Lorenzo Ciani, Matteo Venzi, Marcantonio Catelani, 2018 .

Analysis and Design of Stand-Alone Photovoltaic System for precision agriculture network of sensors

Lorenzo Ciani, Alessandro Bartolini, Alberto Reatti, 2020, 2020 IEEE International Conference on Environment and Electrical Engineering and 2020 IEEE Industrial and Commercial Power Systems Europe (EEEIC / I&CPS Europe).

Reliability Allocation Procedures in Complex Redundant Systems

Marcantonio Catelani, Lorenzo Ciani, Matteo Venzi, 2018, IEEE Systems Journal.

The Student’s t distribution to measure the word error rate in analog-to-digital converters

Sergio Rapuano, Lorenzo Ciani, A. Zanobini, 2012 .

Design and implementation of an automatic measurement system for the characterization of power MOSFETs

Marcantonio Catelani, Lorenzo Ciani, M. Catelani, 2013 .

MLMVNNN for Parameter Fault Detection in PWM DC–DC Converters and Its Applications for Buck and Boost DC–DC Converters

Marcantonio Catelani, Lorenzo Ciani, Marian K. Kazimierczuk, 2019, IEEE Transactions on Instrumentation and Measurement.

The FMEDA approach to improve the safety assessment according to the IEC61508

Marcantonio Catelani, Lorenzo Ciani, Valentina Luongo, 2010, Microelectron. Reliab..

Highly Accelerated Life Testing for avionics devices

Marcantonio Catelani, Lorenzo Ciani, 2014, 2014 IEEE Metrology for Aerospace (MetroAeroSpace).

Influence of Raised Ambient Temperature on a Sensor Node Using Step-Stress Test

Marcantonio Catelani, Lorenzo Ciani, Alessandro Bartolini, 2020, IEEE Transactions on Instrumentation and Measurement.

Component Reliability Importance assessment on complex systems using Credible Improvement Potential

Marcantonio Catelani, Lorenzo Ciani, Matteo Venzi, 2016, Microelectron. Reliab..

Introduction to the t and chi-square distribution for a more accurate evaluation of measure of the Word Error Rate in Analog-to-Digital Converters

Lorenzo Ciani, A. Zanobini, Marcantonio Catelani, 2008 .

Software automated testing: A solution to maximize the test plan coverage and to increase software reliability and quality in use

Marcantonio Catelani, Lorenzo Ciani, Valeria L. Scarano, 2011, Comput. Stand. Interfaces.

Condition-based maintenance and Markov modelling for avionics devices

Marcantonio Catelani, Lorenzo Ciani, Matteo Venzi, 2017, 2017 IEEE International Workshop on Metrology for AeroSpace (MetroAeroSpace).

Failure Modes and Mechanisms of Sensors Used in Oil&Gas Applications

Lorenzo Ciani, Matteo Venzi, Marcantonio Catelani, 2018, Sensors.

Reliability and availability analysis of an automatic highway toll collection system

Marcantonio Catelani, Lorenzo Ciani, Emiliano S. Paolilli, 2013, 2013 IEEE International Instrumentation and Measurement Technology Conference (I2MTC).

Experimental tests and reliability assessment of electronic ballast system

Marcantonio Catelani, Lorenzo Ciani, 2012, Microelectron. Reliab..

Trends in Asset Monitoring and Prognostics

Lorenzo Ciani, Matteo Venzi, Luca Pugi, 2013 .

Evaluation of the Aging Process of Dye-Sensitized Solar Cells Under Different Stress Conditions

Lorenzo Donati, Marcantonio Catelani, Lorenzo Ciani, 2015, IEEE Transactions on Instrumentation and Measurement.

Design and implementation of a on-board device for photovoltaic panels monitoring

Lorenzo Ciani, Loredana Cristaldi, Marco Faifer, 2013, 2013 IEEE International Instrumentation and Measurement Technology Conference (I2MTC).

DEFINITIONOFSAFETYLEVELSAND PERFORMANCES OFSAFETY: APPLICATIONSFOR AN ELECTRONICEQUIPMENTUSEDON ROLLING STOCK

Marco Mugnaini, Marcantonio Catelani, Lorenzo Ciani, 2007 .

FMECA technique on photovoltaic module

Marcantonio Catelani, Lorenzo Ciani, Loredana Cristaldi, 2011, 2011 IEEE International Instrumentation and Measurement Technology Conference.

Fault detection of resonant inverters for wireless power transmission using MLMVNN

Marcantonio Catelani, Lorenzo Ciani, Marian K. Kazimierczuk, 2016, 2016 IEEE 2nd International Forum on Research and Technologies for Society and Industry Leveraging a better tomorrow (RTSI).

Future trends in I&M: Diagnostics, maintenance and condition monitoring for cyber-physical systems

Lorenzo Ciani, 2019, IEEE Instrumentation & Measurement Magazine.

Maintenance, prognostics and diagnostics approaches for aircraft engines

Anna Syberfeldt, Marcantonio Catelani, Lorenzo Ciani, 2016, 2016 IEEE Metrology for Aerospace (MetroAeroSpace).

Risk Assessment of a Wind Turbine: A New FMECA-Based Tool With RPN Threshold Estimation

Marcantonio Catelani, Lorenzo Ciani, Gabriele Patrizi, 2020, IEEE Access.

Uncertainty Evaluation of DAC Time Response Parameters

Sergio Rapuano, Lorenzo Ciani, A. Zanobini, 2011 .

Environmental tests and optical measurements in the validation process of TFT-LCD for avionics applications

Marcantonio Catelani, Lorenzo Ciani, Matteo Venzi, 2015, 2015 IEEE Metrology for Aerospace (MetroAeroSpace).

Development of a test plan and a testbed for performance analysis of MEMS-based IMUs under vibration conditions

Antonio Pietrosanto, Marcantonio Catelani, Lorenzo Ciani, 2020 .

A fault tolerant architecture to avoid the effects of Single Event Upset (SEU) in avionics applications

Marcantonio Catelani, Lorenzo Ciani, 2014 .

Critical components test and reliability issues for Photovoltaic Inverter

Marcantonio Catelani, Lorenzo Ciani, Alberto Reatti, 2014 .

Wind induced vibrations: A proposal of test profile for outdoor luminaires

Marcantonio Catelani, Lorenzo Ciani, Lorenzo Signorini, 2018, 2018 IEEE International Instrumentation and Measurement Technology Conference (I2MTC).

A hybrid tree sensor network for Condition Monitoring system to optimize maintenance policy

Lorenzo Ciani, Alessandro Bartolini, Gabriele Patrizi, 2020 .

A simplified procedure for the analysis of Safety Instrumented Systems in the process industry application

Marcantonio Catelani, Lorenzo Ciani, Valentina Luongo, 2011, Microelectron. Reliab..

Reliability Degradation, Preventive and Corrective Maintenance of UAV Systems

Lorenzo Ciani, Fabio Leccese, Enrico Petritoli, 2018, 2018 5th IEEE International Workshop on Metrology for AeroSpace (MetroAeroSpace).

Electrical performances optimization of Photovoltaic Modules with FMECA approach

Lorenzo Ciani, Loredana Cristaldi, Marco Faifer, 2013 .

SINGLE EVENT UPSET (SEU): DIAGNOSTIC AND ERROR CORRECTION SYSTEM FOR AVIONCS DEVICE

Marcantonio Catelani, Lorenzo Ciani, S. Marta, 2009 .

Uncertainty Interval Evaluation Using the Chi-Square and Fisher Distributions in the Measurement Process

Lorenzo Ciani, A. Zanobini, Marcantonio Catelani, 2010 .

A Critical Comparison of Alternative Risk Priority Numbers in Failure Modes, Effects, and Criticality Analysis

Lorenzo Ciani, Gabriele Patrizi, Giulia Guidi, 2019, IEEE Access.

Probe Position Error Compensation in Near-field to Far-field Pattern Measurements

Lorenzo Ciani, Fabio Leccese, Enrico Petritoli, 2019, 2019 IEEE 5th International Workshop on Metrology for AeroSpace (MetroAeroSpace).

Classification and analysis of failures of ultracapacitors in rail launchers applications

Marcantonio Catelani, Lorenzo Ciani, Mirko Marracci, 2013, 2013 IEEE International Instrumentation and Measurement Technology Conference (I2MTC).

Repeatability and Reproducibility techniques for the analysis of measurement systems

Lorenzo Ciani, A. Zanobini, Marcantonio Catelani, 2016 .

Method for controlling the drawing of rolling

Lorenzo Ciani, Vedova Ferruccio Della, Paolo Chiaruttini, 1998 .

Architecture for hybrid modelling and its application to diagnosis and prognosis with missing data

Marcantonio Catelani, Lorenzo Ciani, Diego Galar, 2017 .

Safety analysis in oil & gas industry in compliance with standards IEC61508 and IEC61511: Methods and applications

Marcantonio Catelani, Lorenzo Ciani, Valentina Luongo, 2013, 2013 IEEE International Instrumentation and Measurement Technology Conference (I2MTC).

Condition-based Maintenance for Oil&Gas system basing on Failure Modes and Effects Analysis

Lorenzo Ciani, Gabriele Patrizi, Giulia Guidi, 2019, 2019 IEEE 5th International forum on Research and Technology for Society and Industry (RTSI).

Efficient Estimation of the Word Error Rate of Digitizing Waveform Recorders

Sergio Rapuano, Lorenzo Ciani, A. Zanobini, 2011 .

Risk assessment in the use of medical devices: A proposal to evaluate the impact of the human factor

Marcantonio Catelani, Lorenzo Ciani, Chiara Risaliti, 2014, 2014 IEEE International Symposium on Medical Measurements and Applications (MeMeA).

A new approach to test outdoor luminaires based on wind induced vibrations

Marcantonio Catelani, Lorenzo Ciani, Giulio D'Emilia, 2018 .

A new haptic technology touchscreen: Development, characterization and reliability aspects

Marcantonio Catelani, Lorenzo Ciani, Giovanni Barile, 2014, 2014 IEEE Metrology for Aerospace (MetroAeroSpace).

Introductory notes for the Acta IMEKO special issue on "technical diagnostics: New perspectives in measurements, tools and techniques for industrial applications"

Marcantonio Catelani, Lorenzo Ciani, 2014 .

Reliability improvement of wind turbine control system based on standby redundancy

Marcantonio Catelani, Lorenzo Ciani, Gabriele Patrizi, 2019, 2019 International Symposium on Systems Engineering (ISSE).

Optimizing Maintenance Policies for a Yaw System Using Reliability-Centered Maintenance and Data-Driven Condition Monitoring

Marcantonio Catelani, Lorenzo Ciani, Gabriele Patrizi, 2020, IEEE Transactions on Instrumentation and Measurement.

Editorial to selected papers from the 15th IMEKO TC10 Workshop on Technical Diagnostics – “Technical Diagnostics in Cyber-Physical Era”

Lorenzo Ciani, 2018 .

Ottimizzazione delle prestazioni elettriche di sistemi fotovoltaici basata sull’approccio FMECA

Lorenzo Ciani, Loredana Cristaldi, Marco Faifer, 2011 .

Standby Redundancy for Reliability Improvement of Wireless Sensor Network

Marcantonio Catelani, Lorenzo Ciani, Alessandro Bartolini, 2019, 2019 IEEE 5th International forum on Research and Technology for Society and Industry (RTSI).

Word error rate measurement in analog-to-digital converters: Some statistical considerations about IEEE Std 1241-2000, Annex A

Marcantonio Catelani, Lorenzo Ciani, A. Zanobini, 2008 .

Condition monitoring of wind turbine pitch controller: A maintenance approach

Lorenzo Ciani, Diego Galar, Alberto Jimenez Cortadi, 2018, Measurement.

Uncertainty Analysis of Data Converters Testing Parameters

Lorenzo Ciani, A. Zanobini, Marcantonio Catelani, 2014 .

Improved RBD analysis for reliability assessment in industrial application

Marcantonio Catelani, Lorenzo Ciani, Matteo Venzi, 2014, 2014 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings.

Diagnostics and Fault Tolerant Sensor Architectures

Lorenzo Ciani, Matteo Venzi, Marcantonio Catelani, 2018 .

Reliability assessment for complex systems: A new approach based on RBD models

Marcantonio Catelani, Lorenzo Ciani, Matteo Venzi, 2015, 2015 IEEE International Symposium on Systems Engineering (ISSE).

Monitoring and field data acquisition system for hybrid static concentrator plant

Marcantonio Catelani, Lorenzo Ciani, Alberto Reatti, 2017 .

Comparing the Effects of GPS Error on Different Electrical Resistivity Tomography Arrays for Archeological Investigations

Marcantonio Catelani, Lorenzo Ciani, Giulia Guidi, 2021, IEEE Transactions on Instrumentation and Measurement.

A Precision Reliability Measurement in a S-Band Transponder for Space Applications

Lorenzo Ciani, Fabio Leccese, Enrico Petritoli, 2019, 2019 IEEE International Instrumentation and Measurement Technology Conference (I2MTC).

Optimization of electromedical instrumentation thermal design

Marcantonio Catelani, Lorenzo Ciani, Valeria L. Scarano, 2011, 2011 IEEE International Symposium on Medical Measurements and Applications.

FAULTDIAGNOSISON BOARD FORANALOG TO DIGITALCONVERTERS

Marcantonio Catelani, Lorenzo Ciani, Gaetano Iuculano, 2007 .

Analysis of a diagnostic system for railway overhead line automatic regulation

Lorenzo Ciani, Marcantonio Catelani, Valeria L. Scarano, 2007 .

Design and Experimental analysis of temperature tests for Inertial Measurement Units in Avionic applications

Antonio Pietrosanto, Marcantonio Catelani, Lorenzo Ciani, 2020, 2020 IEEE 7th International Workshop on Metrology for AeroSpace (MetroAeroSpace).

Ultracapacitor Degradation State Diagnosis via Electrochemical Impedance Spectroscopy

Marcantonio Catelani, Lorenzo Ciani, Mirko Marracci, 2015, IEEE Transactions on Instrumentation and Measurement.

A new design technique of TFT-LCD display for avionics application

Marcantonio Catelani, Lorenzo Ciani, G. Barile, 2012, Microelectron. Reliab..

A novel layered approach to evaluate reliability of complex systems

Lorenzo Ciani, Alessandro Fantechi, Laura Carnevali, 2019, 2019 IEEE 5th International forum on Research and Technology for Society and Industry (RTSI).

TFT-LCD for avionics applications: development, characterization and reliability analysis

Marcantonio Catelani, Lorenzo Ciani, Giovanni Barile, 2010, 2010 IEEE Instrumentation & Measurement Technology Conference Proceedings.

A novel technique for power inverter control based on a single voltage sensor

Marcantonio Catelani, Lorenzo Ciani, Enrico Simoni, 2009, 2009 IEEE Instrumentation and Measurement Technology Conference.

Reliability evaluation of an HVAC ventilation system with FTA and RBD analysis

Lorenzo Ciani, Giulia Guidi, Diego Galar, 2020, 2020 IEEE International Symposium on Systems Engineering (ISSE).

MLMVNN for parameters faults detection in a DC-DC boost converter

Marcantonio Catelani, Lorenzo Ciani, Marian K. Kazimierczuk, 2015 .

Practical Issues and Characterization of a Photovoltaic/Thermal Linear Focus $20\times $ Solar Concentrator

Marcantonio Catelani, Lorenzo Ciani, Marian K. Kazimierczuk, 2016, IEEE Transactions on Instrumentation and Measurement.

Improving context awareness reliability estimation for a wind turbine using an RBD model

Lorenzo Ciani, Gabriele Patrizi, Diego Galar, 2019, 2019 IEEE International Instrumentation and Measurement Technology Conference (I2MTC).

Reliability allocation assessment using MEOWA method in complex redundant systems

Marcantonio Catelani, Lorenzo Ciani, Matteo Venzi, 2016, 2016 IEEE International Symposium on Systems Engineering (ISSE).

Maintainability improvement using allocation methods for railway system

Marcantonio Catelani, Lorenzo Ciani, Gabriele Patrizi, 2020 .

Simplified method for evaluating the effects of dust and aging on photovoltaic panels

Lorenzo Ciani, Loredana Cristaldi, Sergio Toscani, 2014 .

A proposal of uncertainty assessment for data of environmental testing: Using a machine learning procedure

Marcantonio Catelani, Lorenzo Ciani, Giulio D'Emilia, 2018, 2018 IEEE International Instrumentation and Measurement Technology Conference (I2MTC).

Haptic touchscreen display for avionics: Demonstrator characterization measurements

Marcantonio Catelani, Lorenzo Ciani, Giovanni Barile, 2015, 2015 IEEE Metrology for Aerospace (MetroAeroSpace).

Metrological characterization of infrared sensor and application on drone anti-collision system

Marcantonio Catelani, Lorenzo Ciani, Andrea Zanobini, 2016, 2016 IEEE Metrology for Aerospace (MetroAeroSpace).

Custom TFT-LCD for avionics applications: Environmental tests and optical measurements

Lorenzo Ciani, Matteo Venzi, Marcantonio Catelani, 2016 .

Mixed mode vibration test for luminaires devices: A new proposal

Marcantonio Catelani, Lorenzo Ciani, Roberto Singuaroli, 2015, 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings.

Context awareness for maintenance decision making: A diagnosis and prognosis approach

Marcantonio Catelani, Lorenzo Ciani, Diego Galar, 2015 .

Reliability and Maintenance Analysis of Unmanned Aerial Vehicles †

Lorenzo Ciani, Enrico Petritoli, Fabio Leccese, 2018, Sensors.

Prognostic Hybrid Modelling from Data Fusion on Machine Tools

Marcantonio Catelani, Lorenzo Ciani, Diego Galar, 2016 .

TTH library: A new tool for diagnostic assessment of Oil&Gas applications

Marcantonio Catelani, Lorenzo Ciani, Matteo Venzi, 2015, 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings.

Measurement and Comparison of Reliability Performance of Photovoltaic Power Optimizers for Energy Production

Marcantonio Catelani, Lorenzo Ciani, Giorgio Graditi, 2015 .

Uncertainty Analysis in High-Speed Multifunction Data Acquisition Device

Lorenzo Ciani, A. Zanobini, S. Marta, 2011 .

Repeatability and reproducibility techniques for measurement system analysis

Marcantonio Catelani, Lorenzo Ciani, A. Zanobini, 2014 .

Word error rate measurement uncertainty estimation in digitizing waveform recorders

Sergio Rapuano, Lorenzo Ciani, A. Zanobini, 2013 .

Credible improvement potential index for reliability importance assessment

Lorenzo Ciani, Matteo Venzi, Marcantonio Catelani, 2016 .

Characterization of optical ageing effects on Ruthenium based Dye-Sensitized Solar Cells

Lorenzo Donati, Marcantonio Catelani, Lorenzo Ciani, 2014, 2014 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings.

PWM DC‐DCコンバータとその応用バックDC‐DCコンバータのためのにおけるパラメータ故障検出のためのMLMVNN【Powered by NICT】

Marcantonio Catelani, Lorenzo Ciani, Alberto Reatti, 2016 .

Smart maintenance and inspection of linear assets: An Industry 4.0 approach

Marcantonio Catelani, Lorenzo Ciani, Diego Galar, 2018 .

Qualification tests and reliability analysis on electronic ballast system

Marcantonio Catelani, Lorenzo Ciani, Andrea Zanobini, 2009, 2009 IEEE Instrumentation and Measurement Technology Conference.

Selection and control device for bars and corresponding method

Lorenzo Ciani, Giuseppe Bordignon, 1998 .

Experimental Analysis of Filtering Algorithms for IMU-Based Applications Under Vibrations

Antonio Pietrosanto, Marcantonio Catelani, Lorenzo Ciani, 2021, IEEE Transactions on Instrumentation and Measurement.

Ultra-Wideband Radar-Based Indoor Activity Monitoring for Elderly Care

Lorenzo Mucchi, Matti Hämäläinen, Lorenzo Ciani, 2021, Sensors.

Effects of inaccurate electrode positioning in subsurface resistivity measurements for archeological purposes

Marcantonio Catelani, Lorenzo Ciani, Giulia Guidi, 2021, 2021 IEEE International Instrumentation and Measurement Technology Conference (I2MTC).

FMECA Assessment for Railway Safety-Critical Systems Investigating a New Risk Threshold Method

Serena Matucci, Marcantonio Catelani, Lorenzo Ciani, 2021, IEEE Access.

An enhanced SHERPA (E-SHERPA) method for human reliability analysis in railway engineering

Marcantonio Catelani, Lorenzo Ciani, Giulia Guidi, 2021, Reliab. Eng. Syst. Saf..

Reliability and Functional Analysis of IMU systems under temperature-based stress tests

Antonio Pietrosanto, Marcantonio Catelani, Lorenzo Ciani, 2021, 2021 IEEE International Instrumentation and Measurement Technology Conference (I2MTC).

Condition-Based Maintenance of HVAC on a High-Speed Train for Fault Detection

Lorenzo Ciani, Giulia Guidi, Gabriele Patrizi, 2021, Electronics.

Accelerated Testing and Reliability estimation of electronic boards for automotive applications

Marcantonio Catelani, Lorenzo Ciani, Giulia Guidi, 2021, 2021 IEEE International Workshop on Metrology for Automotive (MetroAutomotive).

Reliability Allocation: an iterative approach for complex systems

Marcantonio Catelani, Lorenzo Ciani, Giulia Guidi, 2021, 2021 IEEE International Symposium on Systems Engineering (ISSE).

Improving Human Reliability Analysis for Railway Systems Using Fuzzy Logic

Lorenzo Ciani, Giulia Guidi, Gabriele Patrizi, 2021, IEEE Access.

Remaining Useful Life Estimation for Prognostics of Lithium-Ion Batteries Based on Recurrent Neural Network

Romano Fantacci, Marcantonio Catelani, Lorenzo Ciani, 2021, IEEE Transactions on Instrumentation and Measurement.

Human error probability estimation for safety and diagnostic systems in railway engineering

Marcantonio Catelani, Lorenzo Ciani, Giulia Guidi, 2021, Measurement: Sensors.