I. Kimpara

发表

Evaluation of impact damage mechanism of multi-axial stitched CFRP laminate

Hiroshi Saito, Isao Kimpara, H. Saito, 2006 .

Multilayered and Selective Higher-Order-Deformable Sandwich Finite Element Modeling for Numerical Accuracy Improvement

I. Kimpara, Kohji Suzuki, 2004 .

NON-LINEAR VIBRATION AND DAMPING CHARACTERIZATIONS OF DELAMINATED COMPOSITE LAMINATES BY USING MULTILAYERED FINITE ELEMENTS

K. Kageyama, I. Kimpara, Kohji Suzuki, 2004 .

Free Vibration and Damping Characterization of Delaminated Composites by FEM

K. Kageyama, K. Funami, I. Kimpara, 2004 .

Mode I and Mode II Delamination Growth of Interlayer Toughened Carbon/Epoxy (T800H/3900-2) Composite System

M. Hojo, K. Kageyama, I. Ohsawa, 1995 .

Thermal and mechanical properties of electrospun nano-celullose reinforced epoxy nanocomposites

K. Uzawa, N. Phong, M. Gabr, 2014 .

Mechanical, thermal, and moisture absorption properties of nano-clay reinforced nano-cellulose biocomposites

K. Uzawa, M. Abdelkareem, N. Phong, 2013, Cellulose.

Experimental Evaluation of the Damage Growth Restraining in 90° Layer of Thin-ply CFRP Cross-ply Laminates

H. Saito, I. Kimpara, H. Takeuchi, 2012 .

EFFECTS OF TEST CONDITIONS ON MODE II INTERLAMINAR FRACTURE TOUGHNESS OF FOUR-POINT ENF SPECIMENS

Toshio Suzuki, K. Kageyama, I. Ohsawa, 1999 .

K-2332 Structural Health Monitoring by Using Brillouin Gain Spectroscopy

H. Naruse, A. Shimada, H. Murayama, 2001 .

Strain Measurement with Multi-Locational, Regional and Distributed Fiber-Optic Sensors

Toshio Suzuki, H. Murayama, K. Kageyama, 1997 .

Delamination failures in polymer composites

K. Kageyama, I. Kimpara, 1991 .

Damage Tolerance Estimation of Advanced Composite Materials

Toshio Suzuki, K. Kageyama, I. Ohsawa, 1990 .

A study of crack suppression mechanism of thin-ply carbon-fiber-reinforced polymer laminate with mesoscopic numerical simulation

H. Saito, I. Kimpara, H. Takeuchi, 2014 .

Experimental Evaluation of the Damage Growth Restraining in 90° Layer of Thin-ply CFRP Cross-ply Laminates

H. Saito, I. Kimpara, H. Takeuchi, 2012 .

Mode I and Mode II Fracture Toughness Measured Between Differently Oriented Plies in Graphite/Epoxy Composites

K. Kageyama, I. Ohsawa, I. Kimpara, 1995 .

Analysis of thickness-direction ultrasonic wave propagation of fiberglass reinforced plastics laminates

T. Suzuki, I. Kimpara, M. Takehana, 1978 .

Mechanical and thermal properties of carbon fiber/polypropylene composite filled with nano-clay

K. Uzawa, M. Gabr, I. Kimpara, 2015 .

Finite element stress analysis of interlayer based on selective layerwise higher-order theory

K. Kageyama, I. Kimpara, Kohji Suzuki, 1998 .

Effect of ply-thickness on impact damage morphology in CFRP laminates

Hiroshi Saito, Kazumasa Kawabe, Isao Kimpara, 2011 .

Cross-Sectional Area Measurement and Monofilament Strength Test of Kenaf Bast Fibers

Hiroshi Saito, Kunio Funami, Isao Kimpara, 2005 .

Vibration and Damping Prediction of Laminates with Constrained Viscoelastic Layers--Numerical Analysis by a Multilayer Higher-Order-Deformable Finite Element and Experimental Observations

Kazuro Kageyama, Tsuyoshi Ozaki, Shigenori Kabashima, 2003 .

Fractography of Fracture Surface of Unidirectional CFRP under Three Point Bending

I. Ohsawa, I. Kimpara, H. Kim, 1979 .

Mechanical Properties and Material Design of Glass/Aramid/Carbon Hybrid FRP Laminates. II. Mechanical Properties and Material Design of Glass/Aramid/Carbon Hybrid FRP Laminates-Fatigue Properties.

Toshio Suzuki, M. Nakada, K. Kageyama, 1995 .

Damping Properties under Longitudinal Vibration for CFRP/Damping Materials Laminates.

T. Tanimoto, I. Kimpara, J. Fujimoto, 1994 .

Post-impact fatigue behavior of woven and knitted fabric CFRP laminates for marine use (Special issue on long-term durability and damage tolerance of innovative marine composites)

H. Saito, I. Kimpara, 2007 .

Hydrolysis control by introduction of photodissociable protecting groups in PLA as matrix of green composite materials

Mototsugu Tanaka, H. Saito, I. Kimpara, 2014 .

REPAIR OF CF / PA 6 LAMINATES BELOW MELTING POINT WITH BARELY VISIBLE IMPACT DAMAGE

M. Hojo, M. Nishikawa, I. Kimpara, 2022 .

Some Basic Considerations on Crack Arresters for Welded Steel Structures (The 4 th report)

Susumu Machida, Takeshi Kanazawa, Masaaki Matoba, 1964 .

Effect of Fiber Orientation on the Mode I Interlaminar Fracture Behavior of CF/EPOXY Laminates.

K. Kageyama, I. Ohsawa, I. Kimpara, 1992 .

Evaluation of Mode II Static Interlaminar Fracture Toughness in 0º/45º-Oriented Layers of CFRP Laminates

Mototsugu Tanaka, H. Saito, I. Kimpara, 2018, Journal of the Japan Society for Composite Materials.

Evaluation of Mode I interlaminar fracture toughness in asymmetric interlayer in CFRP laminates

H. Saito, I. Kimpara, Ryosuke Kikuchi, 2020, Advanced Composite Materials.

Effect of Moisture Absorption on Mode I and Mode II Interlaminar Fracture Toughness of CFRP Laminates.

K. Kageyama, I. Ohsawa, I. Kimpara, 1993 .

Simulation on tensile failure process of unidirectional hybrid FRP.

T. Ozaki, S. Takada, I. Kimpara, 1985 .

Effect of Fiber Orientation on Mode I and Mode II Interlaminar Fracture Toughness of CFRP Laminates.

K. Kageyama, I. Ohsawa, I. Kimpara, 1993 .

Use of advanced composite materials in marine vehicles

I. Kimpara, 1991 .