S. Klimenko

发表

Cutting Tools of Superhard Materials

S. Klimenko, Yu. A. Mukovoz, L. Polonsky, 1995 .

Microstructure and Physical–Mechanical Properties of (TiAlSiY)N Nanostructured Coatings Under Different Energy Conditions

S. V. Litovchenko, S. O. Borba-Pogrebnjak, K. Smyrnova, 2018, Metals and Materials International.

Structure and Mechanical Properties of TiAlSiY Vacuum-Arc Coatings Deposited in Nitrogen Atmosphere

A. Pogrebnjak, O. Sobol, V. Beresnev, 2018, Inorganic Materials: Applied Research.

Formation of Superhard State of the TiZrHfNbTaYN Vacuum–Arc High-Entropy Coating

S. V. Litovchenko, O. Sobol, V. Beresnev, 2018, Journal of Superhard Materials.

IMPACT OF CUTTING ELEMENTS ON FORCES AND ROUGHNESS OF SURFACE DURING TURNING HARD STEEL X 160 CrMo V 12 WITH CBN TOOL

S. Klimenko, L. Tanović, M. Vukčević, 2017 .

Hard “skiving” turning

S. Klimenko, A. Manokhin, 2009 .

Polycrystalline Cubic Boron Nitride (PCBN) Tool Life and Wear in Turning of Amorphous-Crystalline Iron-Based Coatings

S. Klimenko, L. Tanović, P. Bojanic, 2011 .

Superhard coatings of the (Zr-Ti-Si)N and (Ti-Hf-Si)N systems produced by vacuum-arc deposition from a separated flow

A. Pogrebnjak, V. Beresnev, S. Klimenko, 2014, Journal of Superhard Materials.

Wear resistance of the multicomponent coatings of the (Ti-Zr-Hf-V-Nb-Ta)N system at elevated temperature

V. Beresnev, I. Podchernyaeva, S. Klimenko, 2015, Journal of Superhard Materials.

Formation of a Tribofilm in the Surface Layer of Al–Ti–Cr–N–B Magnetron Coating on Boron Nitride During Turning of Hardened Steel

I. Podchernyaeva, S. Klimenko, V. Beresnev, 2015, Powder Metallurgy and Metal Ceramics.

AlN-(TiCr)B2 ion-plasma coating for cutting tools of cBN-based polycrystalline superhard material

S. Klimenko, V. Beresnev, V. M. Panashenko, 2014, Journal of Superhard Materials.

Ensuring the adhesion and cohesion strength of PVD (TiAl)N and TiN coatings

S. Klimenko, E. Soroka, M. Kopeikina, 2011 .

Efficiency of cutting tools equipped with cBN-based polycrystalline superhard materials having vacuum-plasma coating

S. Klimenko, V. Beresnev, M. Kopeikina, 2008 .

Wear Rate of PcBN Cutting Tools Equipped with Nanolayered Protective Coatings

S. Klimenko, A. Manokhin, V. Beresnev, 2020, Journal of Superhard Materials.

Influence of the high-temperature annealing on the structure and mechanical properties of vacuum–arc coatings from Mo/(Ti + 6 wt % Si)N

S. V. Litovchenko, A. Pogrebnjak, V. Beresnev, 2017, Journal of Superhard Materials.

Studies of the oxidation stability, mechanical characteristics of materials based on max phases of the Ti-Al-(C, N) systems, and of the possibility of their use as tool bonds and materials for polishing

Yu. D. Filatov, I. Petrusha, V. Turkevich, 2014, Journal of Superhard Materials.

Promising Types of Coatings for PCBN Tools

S. Klimenko, A. Manokhin, V. Beresnev, 2018, Journal of Superhard Materials.

On the wear mechanism of cubic boron nitride base cutting tools

S. A. Klimenko, S. Klimenko, Yu. A. Mukovoz, 1992 .

Method of Estimation of Mechanical Properties of the Surface Layer of Cutter Elements Made of Polycrystalline Superhard Composites Based on Cubic Boron Nitride

S. Klimenko, E. O. Nasakina, A. Kolmakov, 2019, Inorganic Materials: Applied Research.

Comparative durability of materials in wear

S. Klimenko, V. A. Lyashko, M. M. Potemkin, 1998 .

Effect of the deposition parameters on the phase–structure state, hardness, and tribological characteristics of Mo2N/CrN vacuum–arc multilayer coatings

S. V. Litovchenko, O. Sobol, V. Beresnev, 2016, Journal of Superhard Materials.