W. Sabuga

发表

Determination of the Boltzmann constant by dielectric-constant gas thermometry

Wladimir Sabuga, Otto Jusko, Joachim Fischer, 2013 .

Comparison of methods for calculating distortion in pressure balances up to 400 MPa - EUROMET Project 256

Wladimir Sabuga, J C Legras, G F Molinar, 1998 .

Effect of roughness on the emissivity of the precious metals silver, gold, palladium, platinum, rhodium, and iridium

Wladimir Sabuga, W. Sabuga, Reinhard Todtenhaupt, 2001 .

Measurement of pressures up to 7 MPa applying pressure balances for dielectric-constant gas thermometry

B. Fellmuth, C. Gaiser, W. Sabuga, 2015 .

Selection and characterization of liquids for a low pressure interferometric liquid column manometer

A. Furtado, W. Sabuga, H. Wolf, 2019, Measurement.

Final report on key comparison EURAMET.M.P-K13 in the range 50 MPa to 500 MPa of hydraulic gauge pressure

W. Sabuga, J. Šetina, M. Bergoglio, 2015 .

Transient Hot Wire (THW) Method: Uncertainty Assessment

W. Sabuga, U. Hammerschmidt, 2000 .

Transient Hot Strip (THS) Method: Uncertainty Assessment

U. Hammerschmidt, W. Sabuga, W. Sabuga, 2000 .

Progress in development of an interferometric oil manometer

W. Sabuga, S. Ehlers, 2020, ACTA IMEKO.

Perspectives for a new realization of the pascal by optical methods

R. Schödel, D. Olson, U. Sterr, 2017 .

Final report on key comparison CCM.P-K13 in the range 50 MPa to 500 MPa of hydraulic gauge pressure

M. Bergoglio, Wladimir Sabuga, Douglas A. Olson, 2005 .

Primary gas-pressure standard from electrical measurements and thermophysical ab initio calculations

B. Fellmuth, C. Gaiser, W. Sabuga, 2020 .

Primary gas-pressure standard from electrical measurements and thermophysical ab initio calculations

B. Fellmuth, C. Gaiser, W. Sabuga, 2019, Nature Physics.

Improved determination of the Boltzmann constant by dielectric-constant gas thermometry

J. Fischer, B. Fellmuth, C. Gaiser, 2013 .

Determination of the Boltzmann constant by dielectric-constant gas thermometry

J. Fischer, B. Fellmuth, C. Gaiser, 2011 .

A new method for the evaluation of thermal conductivity and thermal diffusivity from transient hot strip measurements

W. Sabuga, U. Hammerschmidt, 1995 .

Validation of a PTB force-balanced piston gauge primary pressure standard

W. Sabuga, A. Hashad, S. Ehlers, 2021 .

Computation of the effective area and associated uncertainties of non-rotating piston gauges FPG and FRS

N. Vasileiadis, W. Sabuga, D. Valougeorgis, 2018, Metrologia.

FEA calculation of pressure distortion coefficients of gas-operated pressure balances – EURAMET project 1039

Wladimir Sabuga, T. Priruenrom, D. Pražák, 2012 .

Towards 7 MPa Pressure Standards with 1·10 -6 Uncertainty

W. Sabuga, Physikalisch-Technische Bundesanstalt, 2007 .

2D flow model for calculating effective area of piston-cylinder units

W. Sabuga, A. Hashad, S. Ehlers, 2020 .

Characterization of a force-balanced piston gauge as a primary pressure standard

Wladimir Sabuga, Otto Jusko, Ahmed S. Hashad, 2019, Measurement.

Final report on EURAMET.M.P-K4.2010: Key and supplementary comparison of national pressure standards in the range 1 Pa to 15 kPa of absolute and gauge pressure

K. Jousten, W. Sabuga, D. Pražák, 2014 .

Comparison in gas media (absolute and gauge mode)in the range from 25 kPa TO 200 kPa (EURAMET.M.P-K8)

C. Wuethrich, W. Sabuga, A. Eltawil, 2016 .

The international Boltzmann project - the contribution of the PTB

Wladimir Sabuga, Bernd Fellmuth, Joachim Fischer, 2009 .

Final Results of the Geometrical Calibration of the Pressure Balances to be Used for the new Determination of the Boltzmann Constant

O. Jusko, T. Priruenrom, W. Sabuga, 2010 .

Final determination of the Boltzmann constant by dielectric-constant gas thermometry

J. Fischer, B. Fellmuth, C. Gaiser, 2017 .

CCM key comparison in the pressure range 50 kPa to 1000 kPa (gas medium, gauge mode). Phase A2: Pressure measurements

W. Sabuga, J. Legras, James W. Schmidt, 1999 .

CCM key comparison in the pressure range 0.05 MPa to 1 MPa (gas medium, gauge mode). Phase A1: Dimensional measurements and calculation of effective area

O. Jusko, W. Sabuga, J. Legras, 1999 .

Primary Gas Pressure Standard Passes Next Stress Test

B. Fellmuth, C. Gaiser, W. Sabuga, 2022, Annalen der Physik.

Calculation of effective area A0 for six piston–cylinder assemblies of pressure balances. Results of the EUROMET Project 740

Pierre Otal, M. Bergoglio, Wladimir Sabuga, 2005 .

Comparison of the national pressure standards of the Russian Federation (VNIIM), Germany (PTB) and Slovakia (SMU) in the pressure range 1 MPa to 3 MPa (COOMET project 115/RU/95)

W. Sabuga, P. Farár, Z. Faltus, 1999 .

Final report on key comparison COOMET.M.P-K1 in the range 0.05 MPa to 0.5 MPa of pneumatic gauge pressure

W. Sabuga, I. Sandu, K. Saczuk, 2008 .

Recent progress in high pressure metrology in Europe

Wladimir Sabuga, D. Pražák, Thierry Rabault, 2014 .

Finite element method used for calculation of the distortion coefficient and associated uncertainty of a PTB 1 GPa pressure balance—EUROMET project 463

Wladimir Sabuga, J C Legras, Giorgio Buonanno, 2006 .

Calculation of the distortion coefficient and associated uncertainty of PTB and LNE 1 GPa pressure balances using finite element analysis—EUROMET project 463

Wladimir Sabuga, Giorgio Buonanno, T J Esward, 2005 .

Phase A2 of the CCM Key Comparison in the Pressure Range 50 - 1000 kPa (gas medium, gauge mode) Pressure Measurements

G. Colonnetti, J C Legras, W Sabuga, 2001 .

Piston-cylinder assemblies of 5 cm2 cross-sectional area used in an oil-operated primary pressure balance standard for the 10 MPa range

W. Sabuga, D. Wassmann, J. ger, 1999 .

Calibration methods for negative gauge pressure down to −100 kPa

W. Sabuga, M. Plimmer, D. Bentouati, 2018 .

Characterization of the new 1 GPa piston-cylinder assembly of PTB

Wladimir Sabuga, Jin Yue, Alexander Gluschko, 2019, Measurement.

An Approach to Synchronise Effective Areas of Pressure Balances

W. Sabuga, T. Priruenrom, T. Priruenrom, 2015 .

An Approach to Synchronise Effective Areas of Pressure Balances

T. Priruenrom, W. Sabuga, 2014, MAPAN.

Final report on regional key comparison COOMET.M.P-K2: Hydraulic gauge pressure in the range 10 MPa to 100 MPa

W. Sabuga, I. Sandu, K. Saczuk, 2011 .