Dongdong Gu

发表

Effects of processing parameters on direct laser sintering of multicomponent Cu based metal powder

Yifu Shen, Yifu Shen, D. Gu, 2006 .

Nanocrystalline TiC reinforced Ti matrix bulk-form nanocomposites by Selective Laser Melting (SLM): Densification, growth mechanism and wear behavior

Reinhart Poprawe, Konrad Wissenbach, Yves-Christian Hagedorn, 2011 .

Selective laser melting 3D printing of Ni-based superalloy: understanding thermodynamic mechanisms

Guanqun Yu, Mujian Xia, D. Gu, 2016 .

Influence of reinforcement weight fraction on microstructure and properties of submicron WC–Cop/Cu bulk MMCs prepared by direct laser sintering

Yifu Shen, Yifu Shen, D. Gu, 2007 .

A comparative study between pulsed metal inert gas welding and continuous metal inert gas welding on thin Invar alloy

Xiaohong Zhan, D. Gu, X. Zhan, 2019 .

Balling phenomena during direct laser sintering of multi-component Cu-based metal powder

Yifu Shen, Yifu Shen, D. Gu, 2007 .

Effect of the Thermodynamic Behavior of Selective Laser Melting on the Formation of In situ Oxide Dispersion-Strengthened Aluminum-Based Composites

Lijie Guo, Biao Yan, Mujian Xia, 2016 .

Laser Metal Deposition Additive Manufacturing of TiC Reinforced Inconel 625 Composites: Influence of the Additive TiC Particle and Its Starting Size

Sainan Cao, D. Gu, Dongdong Gu, 2017 .

Influence of scan strategy and molten pool configuration on microstructures and tensile properties of selective laser melting additive manufactured aluminum based parts

Chen Hong, Reinhart Poprawe, R. Poprawe, 2018 .

Selective laser melting additive manufacturing of Inconel 718 superalloy parts: Densification, microstructure and properties

D. Gu, Q. Jia, Dongdong Gu, 2014 .

Surface wettability and superhydrophobic characteristics of Ni-based nanocomposites fabricated by selective laser melting

Meng Guo, Mujian Xia, D. Gu, 2019, Applied Surface Science.

Improving additive manufacturing processability of hard-to-process overhanging structure by selective laser melting

Mujian Xia, D. Gu, Mujian Xia, 2017 .

In-situ TiC particle reinforced Ti-Al matrix composites: Powder preparation by mechanical alloying and Selective Laser Melting behavior

Yifu Shen, Zhiyang Wang, Yifu Shen, 2009 .

Balling phenomena in direct laser sintering of stainless steel powder: Metallurgical mechanisms and control methods

Yifu Shen, Yifu Shen, D. Gu, 2009 .

Structural optimization of re-entrant negative Poisson's ratio structure fabricated by selective laser melting

D. Gu, D. Dai, Hongyu Chen, 2017 .

Preparation of TiN-Ti5Si3 in-situ composites by Selective Laser Melting

Zhijian G. Lu, Yifu Shen, Zhijian Lu, 2009 .

Effect of rare earth oxide addition on microstructures of ultra-fine WC-Co particulate reinforced Cu matrix composites prepared by direct laser sintering

Yifu Shen, Yifu Shen, D. Gu, 2007 .

Laser Additive Manufacturing of High-Performance Materials

D. Gu, Dongdong Gu, 2015 .

Selective Laser Melting Additive Manufacturing of Novel Aluminum Based Composites With Multiple Reinforcing Phases

Fei Chang, D. Gu, D. Dai, 2015 .

On the role of processing parameters in thermal behavior, surface morphology and accuracy during laser 3D printing of aluminum alloy

Guanqun Yu, Mujian Xia, D. Gu, 2016 .

Influence of laser parameters and complex structural features on the bio-inspired complex thin-wall structures fabricated by selective laser melting

D. Gu, Luhao Yuan, Dongdong Gu, 2019, Journal of Materials Processing Technology.

Influence of thermodynamics within molten pool on migration and distribution state of reinforcement during selective laser melting of AlN/AlSi10Mg composites

D. Gu, D. Dai, Dongdong Gu, 2016 .

Growth mechanisms of in situ TiC in laser melted Ti–Si–C ternary system

D. Gu, Hongqiao Wang, Guoquan Zhang, 2012 .

Laser additive manufacturing of ultrafine TiC particle reinforced Inconel 625 based composite parts: Tailored microstructures and enhanced performance

Chen Hong, Reinhart Poprawe, Moritz Alkhayat, 2015 .

Effects of laser processing parameters on thermal behavior and melting/solidification mechanism during selective laser melting of TiC/Inconel 718 composites

Sainan Cao, Mujian Xia, D. Gu, 2016 .

Preparation of TiN – Ti 5 Si 3 in-situ composites by Selective Laser Melting

Yifu Shen, Zhijian Lu, Dongdong Gu, 2009 .

A Multiscale Understanding of the Thermodynamic and Kinetic Mechanisms of Laser Additive Manufacturing

Mujian Xia, D. Gu, D. Dai, 2017 .

Selective Laser Melting Additive Manufacturing of TiC/AlSi10Mg Bulk-form Nanocomposites with Tailored Microstructures and Properties

Pengpeng Yuan, Fei Chang, Yves-Christian Hagedorn, 2014 .

Thermal behavior during selective laser melting of commercially pure titanium powder: Numerical simulation and experimental study

D. Gu, Yali Li, Dongdong Gu, 2014 .

Microstructural characteristics and formation mechanism of direct laser-sintered Cu-based alloys reinforced with Ni particles

Zhijian G. Lu, Yifu Shen, Zhijian Lu, 2009 .

Tailoring surface quality through mass and momentum transfer modeling using a volume of fluid method in selective laser melting of TiC/AlSi10Mg powder

D. Gu, D. Dai, Dongdong Gu, 2015 .

Structural evolution and formation mechanisms of TiC/Ti nanocomposites prepared by high-energy mechanical alloying

Reinhart Poprawe, Konrad Wissenbach, Yves-Christian Hagedorn, 2010 .

WC–Co particulate reinforcing Cu matrix composites produced by direct laser sintering

Yifu Shen, Yifu Shen, D. Gu, 2006 .

Bulk-form TiCx/Ti nanocomposites with controlled nanostructure prepared by a new method: selective laser melting

Reinhart Poprawe, Konrad Wissenbach, Yves-Christian Hagedorn, 2010 .

Porosity evolution and its thermodynamic mechanism of randomly packed powder-bed during selective laser melting of Inconel 718 alloy

Guanqun Yu, Mujian Xia, D. Gu, 2017 .

Thermal behavior and densification mechanism during selective laser melting of copper matrix composites: Simulation and experiments

D. Gu, D. Dai, Dongdong Gu, 2014 .

Growth morphologies and mechanisms of TiC grains during Selective Laser Melting of Ti–Al–C composite powder

Yifu Shen, Yifu Shen, D. Gu, 2009 .

Laser additive manufacturing of nano-TiC reinforced Ni-based nanocomposites with tailored microstructure and performance

Chen Hong, Reinhart Poprawe, Mujian Xia, 2019, Composites Part B: Engineering.

On the role of powder flow behavior in fluid thermodynamics and laser processability of Ni-based composites by selective laser melting

Mujian Xia, D. Gu, D. Dai, 2019, International Journal of Machine Tools and Manufacture.

Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium

Reinhart Poprawe, Konrad Wissenbach, Yves-Christian Hagedorn, 2012 .

Particulate migration behavior and its mechanism during selective laser melting of TiC reinforced Al matrix nanocomposites

Pengpeng Yuan, D. Gu, D. Dai, 2015 .

Selective Laser Melting Additive Manufacturing of Ti-Based Nanocomposites: The Role of Nanopowder

D. Gu, Hongqiao Wang, Guoquan Zhang, 2013, Metallurgical and Materials Transactions A.

Finite element simulation and experimental investigation of residual stresses in selective laser melted Ti–Ni shape memory alloy

D. Gu, Dongdong Gu, B. He, 2016 .

Microstructure characteristics and formation mechanisms of in situ WC cemented carbide based hardmetals prepared by Selective Laser Melting

Wilhelm Meiners, D. Gu, W. Meiners, 2010 .

Parametric analysis of thermal behavior during selective laser melting additive manufacturing of aluminum alloy powder

D. Gu, Yali Li, Dongdong Gu, 2014 .