He Yang

发表

Deformation behavior of variable-thickness region of billet in rib-web component isothermal local loading process

Xiaoguang Fan, Zhichao Sun, He Yang, 2012 .

Effect of sizes of forming rolls on cold ring rolling by 3D-FE numerical simulation

Lianggang Guo, He Yang, 2006 .

Friction role in bending behaviors of thin-walled tube in rotary-draw-bending under small bending radii

Mei Zhan, Hejun Li, M. Zhan, 2010 .

Simulation for Guide Roll in 3D-FE Analysis of Cold Ring Rolling

Heng Li, Mei Zhan, Lianggang Guo, 2004 .

Coupled thermo-mechanical FE simulation of the hot splitting spinning process of magnesium alloy AZ31

Mei Zhan, He Yang, M. Zhan, 2010 .

A three-dimensional cellular automata-crystal plasticity finite element model for predicting the multiscale interaction among heterogeneous deformation, DRX microstructural evolution and mechanical responses in titanium alloys

He Yang, Hongwei Li, He Yang, 2016 .

Instable modes of in-plane bending of strip metal under unequal compressing

Xiao Hongsheng, Xian Feijun, He Yang, 2000 .

Study on exit temperature evolution during extrusion for large-scale thick-walled Inconel 625 pipe by FE simulation

Jun Zhang, He Yang, Li Dang, 2015 .

Temperature dependent evolution of anisotropy and asymmetry of α-Ti in thermomechanical working: Characterization and modeling

Jun Ma, Heng Li, M. W. Fu, 2020 .

Forming characteristics of thin-walled tube bending process with small bending radius

Heng Li, Mei Zhan, He Yang, 2006 .

Wrinkling analysis for forming limit of tube bending processes

He Yang, Y. Lin, He Yang, 2004 .

Research on interactive influences of parameters on T-shaped cold ring rolling by 3d-FE numerical simulation

Zhichao Sun, Lianggang Guo, He Yang, 2007 .

A Study on Multi-defect Constrained Bendability of Thin-walled Tube NC Bending Under Different Clearance

Heng Li, He Yang, Heng Li, 2011 .

Modeling of static coarsening of two-phase titanium alloy in the α+β two-phase region at different temperature by a cellular automata method

Chuan Wu, He Yang, Hongwei Li, 2013 .

Microstructural evolution model of TA15 titanium alloy based on BP neural network method and application in isothermal deformation

Ze Tang, Zhichao Sun, He Yang, 2010 .

Cross-sectional distortion behaviors of thin-walled rectangular tube in rotary-draw bending process

He Yang, Yuli Liu, Gangyao Zhao, 2010 .

3D coupled thermo-mechanical FE modeling of blank size effects on the uniformity of strain and temperature distributions during hot rolling of titanium alloy large rings

Zhichao Sun, Lianggang Guo, M. Wang, 2008 .

Significance-based optimization of processing parameters for thin-walled aluminum alloy tube NC bending with small bending radius

Heng Li, Mei Zhan, Jie Xu, 2012 .

Numerical Simulation on Influence of Clearance and Friction on Wrinkling in Bending of Aluminum Alloy Rectangular Tubes

Gang Yao Zhao, He Yang, Yuli Liu, 2007 .

Prediction and control of equiaxed α in near-β forging of TA15 Ti-alloy based on BP neural network: For purpose of tri-modal microstructure

Zhichao Sun, He Yang, Zhichao Sun, 2014 .

Influence of the shape and position of the preform in the precision forging of a compressor blade

Mei Zhan, He Yang, M. Zhan, 2002 .

Three-dimensional finite-elements modeling and simulation of rotary-draw bending process for thin-walled rectangular tube

R. J. Gu, He Yang, Yuli Liu, 2009 .

An imperfection-based perturbation method for plastic wrinkling prediction in tube bending under multi-die constraints

Heng Li, Zhijun Tao, He Yang, 2015 .

Research on the effects of coordinate deformation on radial-axial ring rolling process by FE simulation based on in-process control

Lianggang Guo, Shuai Zhu, Xiaoqing Chen, 2014 .

Identification of processing window for extrusion of large thick-walled Inconel 625 alloy pipes using response surface methodology

Jun Zhang, Lianggang Guo, Wen-da Zheng, 2016 .

A robust integration algorithm for implementing rate dependent crystal plasticity into explicit finite element method

Zhichao Sun, Zhichao Sun, H. Yang, 2008 .

Finite element modeling of power spinning of thin-walled shell with hoop inner rib

Mei Zhan, Qian Bai, He Yang, 2008 .

DRX rules during extrusion process of large-scale thick-walled Inconel 625 pipe by FE method

Jun Zhang, Lianggang Guo, Wen-da Zheng, 2015 .

Quantitative characterization of lamellar and equiaxed alpha phases of (α + β) titanium alloy using a robust approach for touching features splitting

He Yang, Hongwei Li, He Yang, 2013 .

Research on the sensitivity of material parameters to cross-sectional deformation of thin-walled rectangular tube in rotary draw bending process

Dong Jie, He Yang, Yuli Liu, 2016 .

Research on the influences of material properties and forming parameters in T-shaped closed cold ring rolling process

Zhichao Sun, Lianggang Guo, He Yang, 2010 .

Numerical simulation of influence of material parameters on splitting spinning of aluminum alloy

Mei Zhan, He Yang, Liang Huang, 2008 .

Geometry-dependent springback behaviors of thin-walled tube upon cold bending

Heng Li, Guangjun Li, He Yang, 2012 .

Study on the ridge grooves deformation of double-ridged waveguide tube in rotary draw bending based on analytical and simulative methods

Honglie Zhang, He Yang, Yuli Liu, 2017 .

Dynamic explicit FE modeling of hot ring rolling process

Zhichao Sun, Lianggang Guo, M. Wang, 2006 .

Deformation mechanism of cold ring rolling in view of texture evolution predicted by a newly proposed polycrystal plasticity model

He Yang, Hong-wei Li, Lu Feng, 2013 .

Free deformation mechanism and change of forming mode in tube inversion under conical die

Zhichao Sun, Zhichao Sun, H. Yang, 2006 .

Analysis of wrinkling limit of rotary-draw bending process for thin-walled rectangular tube

H. Yang, Yuli Liu, G. Zhao, 2010 .

Review on cellular automata simulations of microstructure evolution during metal forming process: Grain coarsening, recrystallization and phase transformation

Xiaoguang Fan, Chuan Wu, He Yang, 2011 .

Influence of dynamic boundary conditions on preform design for deformation uniformity in backward simulation

Liu Yuli, He Yang, Tao Gao, 2008 .

Recent developments in plastic forming technology of titanium alloys

Mei Zhan, Xiaoguang Fan, Zhichao Sun, 2011 .

Deformation behaviors of thin-walled tube in rotary draw bending under push assistant loading conditions

Mei Zhan, Hejun Li, M. Zhan, 2010 .

A new method to accurately obtain wrinkling limit diagram in NC bending process of thin-walled tube with large diameter under different loading paths

Mei Zhan, Hejun Li, R. J. Gu, 2006 .

Research on the Die Fittingness and Springback of Large Diameter Thin-Walled CT20 Titanium Alloy Tube NC Bending

Mei Zhan, Jian Guang Wang, He Yang, 2012 .

An analytic model for tube bending springback considering different parameter variations of Ti-alloy tubes

Mei Zhan, Yan Wang, Hui Long, 2016 .

Failure mechanism and forming limit of tube axial compressive process

Zhichao Sun, He Yang, 2006 .

Deformation Behavior of Medium-strength TA18 High-pressure Tubes During NC Bending with Different Bending Radii

Mei Zhan, Guangjun Li, He Yang, 2011 .

3D-FE modeling method of splitting spinning

Mei Zhan, He Yang, Liang Huang, 2008 .

Effect of clearance on wrinkling of thin-walled rectangular tube in rotary draw bending process

He Yang, Yuli Liu, G. Zhao, 2010 .

A modified Johnson–Cook model for tensile flow behaviors of 7050-T7451 aluminum alloy at high strain rates

Jing Guo, Mei Zhan, He Yang, 2015 .

Analytical and numerical analyses of local loading forming process of T-shape component by using Coulomb, shear and hybrid friction models

Da-Wei Zhang, He Yang, 2015 .

An accurate 3D-FE based radius prediction model for in-plane roll-bending of strip considering spread effects

Heng Li, Jie Xu, He Yang, 2010 .

Effects of Initial Forming Temperature on Primary Alpha Evolution during Radial-axial Ring Rolling for TA15 Titanium Alloy

Shuai Zhu, He Yang, Linggang Guo, 2014 .

Effects of Process Parameters on Numerical Control Bending Process for Large Diameter thin-walled Aluminum Alloy Tubes

Mei Zhan, Guangjun Li, He Yang, 2009 .

Effects and Optimization of Roll Sizes in Hot Rolling of Large Rings of Titanium Alloy

Zhichao Sun, Lianggang Guo, M. Wang, 2009 .

Forming characteristics of splitting spinning based on the behaviors of roller

Mei Zhan, He Yang, M. Zhan, 2009 .

A method for establishing the plastic constitutive relationship of the weld bead and heat-affected zone of welded tubes based on the rule of mixtures and a microhardness test

Ning Ren, Mei Zhan, Jing Liu, 2010 .

Forming limits under multi-index constraints in NC bending of aluminum alloy thin-walled tubes with large diameters

Mei Zhan, Heng Li, He Yang, 2010 .

Wrinkling Limit Based on FEM Virtual Experiment during NC Bending Process of Thin-Walled Tube

Heng Li, Mei Zhan, Lianggang Guo, 2004 .

Accurate prediction of the profile of thick-walled titanium alloy tube in rotary-draw bending considering strength-differential effect

Mei Zhan, Jing Liu, He Yang, 2012 .

Springback nonlinearity of high-strength titanium alloy tube upon mandrel bending

Heng Li, Guangjun Li, He Yang, 2013 .

Metal flow characteristics of local loading forming process for rib-web component with unequal-thickness billet

He Yang, Da-Wei Zhang, Da-Wei Zhang, 2013 .

Constitutive modeling of compression behavior of TC4 tube based on modified Arrhenius and artificial neural network models

Heng Li, Jun Ma, Zhijun Tao, 2016, Rare Metals.

Coupling effects of material properties and the bending angle on the springback angle of a titanium alloy tube during numerically controlled bending

Mei Zhan, G. J. Li, He Yang, 2010 .