Jürgen Eckert

发表

Comparative study of microstructures and mechanical properties of in situ Ti–TiB composites produced by selective laser melting, powder metallurgy, and casting technologies

Lai‐Chang Zhang, C. Yang, J. Eckert, 2014 .

Additive Manufacturing Processes: Selective Laser Melting, Electron Beam Melting and Binder Jetting—Selection Guidelines

J. Eckert, Prashanth Konda Gokuldoss, S. Kolla, 2017, Materials.

Review on manufacture by selective laser melting and properties of titanium based materials for biomedical applications

Mariana Calin, Lai‐Chang Zhang, J. Eckert, 2016 .

High-strength Ti-base ultrafine eutectic with enhanced ductility

Wolfgang Löser, J. Eckert, J. Das, 2005 .

Macroscopic tensile plasticity of bulk metallic glass through designed artificial defects

Jiaxi Zhao, R. T. Qu, J. Eckert, 2012 .

Phase Formation, Thermal Stability and Mechanical Properties of a Cu-Al-Ni-Mn Shape Memory Alloy Prepared by Selective Laser Melting

Claudio Shyinti Kiminami, Claudemiro Bolfarini, J. Eckert, 2015 .

Influence of processing parameters on the fabrication of a Cu-Al-Ni-Mn shape-memory alloy by selective laser melting

Claudio Shyinti Kiminami, J. Eckert, T. Gustmann, 2016 .

Vickers hardness and compressive properties of bulk metallic glasses and nanostructure-dendrite composites

Z. F. Zhang, Mihai Stoica, Hao Zhang, 2005 .

Lithium dendrite and solid electrolyte interphase investigation using OsO4

Torsten Scherer, Helmut Ehrenberg, Markus Klose, 2014 .

Phase formation and mechanical properties of Ti–Cu–Ni–Zr bulk metallic glass composites

J. Eckert, U. Kühn, P. Gargarella, 2014 .

Selective laser melting of a beta-solidifying TNM-B1 titanium aluminide alloy

Florian Pyczak, J. Eckert, U. Kühn, 2014 .

Processing metallic glasses by selective laser melting

Mihai Stoica, J. Eckert, U. Kühn, 2013 .

Mechanical and Structural Investigation of Porous Bulk Metallic Glasses

Mihai Stoica, Steffen Oswald, J. Eckert, 2015 .

Thermally-triggered Dual In-situ Self-healing Metallic Materials

Sung Hwan Hong, Young Seok Kim, Hae Jin Park, 2018, Scientific Reports.

A universal transfer route for graphene.

Joon Young Kwak, J. Y. Kwak, Thomas Seyller, 2014, Nanoscale.

Strategy for pinpointing the formation of B2 CuZr in metastable CuZr-based shape memory alloys

Ran Li, N. S. Barekar, Mihai Stoica, 2011 .

Comparison of different post processing technologies for SLM generated 316l steel parts

J. Eckert, U. Kühn, L. Löber, 2013 .

Serrated flow and stick-slip deformation dynamics in the presence of shear-band interactions for a Zr-based metallic glass

Mihai Stoica, Weiying Wang, J. Eckert, 2012 .

Towards Ultrastrong Glasses

Jürgen Horbach, Tanguy Rouxel, Lothar Wondraczek, 2011, Advanced materials.

Microstructure evolution and soft magnetic properties of Fe72-xNbxAl5Ga2P11C6B4 (x = 0, 2) metallic glasses

J. Eckert, C. Mickel, Jürgen Eckert, 2002 .

In situ observations of self-repairing single-walled carbon nanotubes

Gianaurelio Cuniberti, Jamie H. Warner, Thomas Gemming, 2010 .

Aromatic porous-honeycomb electrodes for a sodium-organic energy storage device

Haoshen Zhou, Stefan Kaskel, Thomas Gemming, 2013, Nature Communications.

Synergistically Enhanced Polysulfide Chemisorption Using a Flexible Hybrid Separator with N and S Dual-Doped Mesoporous Carbon Coating for Advanced Lithium-Sulfur Batteries.

Markus Klose, Manuel Richter, Steffen Oswald, 2016, ACS applied materials & interfaces.

Manufacture by selective laser melting and mechanical behavior of a biomedical Ti–24Nb–4Zr–8Sn alloy

Yulin Hao, Lai‐Chang Zhang, T. Sercombe, 2011 .

Manufacture by selective laser melting and mechanical behavior of commercially pure titanium

Mariana Calin, Lai‐Chang Zhang, J. Eckert, 2014 .

Investigation of early cell–surface interactions of human mesenchymal stem cells on nanopatterned β-type titanium–niobium alloy surfaces

Horst Kessler, Joachim P. Spatz, Patrick Herre, 2014, Interface Focus.

Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser melting

Konda Gokuldoss Prashanth, Om Prakash, O. Prakash, 2016 .

Nanoindentation and wear properties of Ti and Ti-TiB composite materials produced by selective laser melting

Matthew S. Dargusch, Mariana Calin, Horst Wendrock, 2017 .

High Area Capacity Lithium-Sulfur Full-cell Battery with Prelitiathed Silicon Nanowire-Carbon Anodes for Long Cycling Stability

Thomas Mikolajick, Walter M. Weber, Matthias Grube, 2016, Scientific Reports.

Influence of heterogeneities with different length scale on the plasticity of Fe-base ultrafine eutectic alloys

Won Tae Kim, J. Eckert, Do Hyang Kim, 2008 .

Ti–Cu–Ni shape memory bulk metallic glass composites

Eberhard Kerscher, Horst Wendrock, N. S. Barekar, 2013 .

Metallic glasses: Notch-insensitive materials

Mariana Calin, R. T. Qu, J. Eckert, 2012 .

Rapid Manufacturing of Cellular Structures of Steel or Titaniumalumide

J. Eckert, U. Kühn, L. Löber, 2011 .

Mechanical Properties of Bulk Metallic Glasses

John J. Lewandowski, A. R. Yavari, J. Lewandowski, 2007 .

Negentropic stabilization of metastable β-Ti in bulk metallic glass composites

Thomas Gemming, Wenyu Li, J. Eckert, 2016 .

High-strength bulk Al-based bimodal ultrafine eutectic composite with enhanced plasticity

Kamanio Chattopadhyay, Won Tae Kim, J. Eckert, 2009 .

Additive Manufacturing: Reproducibility of Metallic Parts

Konda Gokuldoss Prashanth, J. Eckert, S. Scudino, 2017 .

Additive manufacturing of Cu-10Sn bronze

Konda Gokuldoss Prashanth, Volker Uhlenwinkel, N. Ellendt, 2015 .

Comparison of wear properties of commercially pure titanium prepared by selective laser melting and casting processes

Konda Gokuldoss Prashanth, A. K. Chaubey, Lai‐Chang Zhang, 2015 .

Microstructure and mechanical properties of Al-12Si produced by selective laser melting: Effect of heat treatment

Konda Gokuldoss Prashanth, A. K. Chaubey, J. Eckert, 2014 .

Mechanical Behavior of Porous Commercially Pure Ti And Ti–TiB Composite Materials Manufactured By Selective Laser Melting

Konda Gokuldoss Prashanth, Lai‐Chang Zhang, J. Eckert, 2015 .

Correlation between the microstructures and the deformation mechanisms of CuZr-based bulk metallic glass composites

Mihai Stoica, J. Eckert, U. Kühn, 2013 .

Novel Ti-base nanostructure–dendrite composite with enhanced plasticity

Ludwig Schultz, Guo He, Wolfgang Löser, 2003, Nature materials.

Selective laser melting of La(Fe,Co,Si) 13 geometries for magnetic refrigeration

Konstantin P. Skokov, Oliver Gutfleisch, J. Eckert, 2013 .

Selective laser melting of in situ titanium–titanium boride composites: Processing, microstructure and mechanical properties

Mariana Calin, Lai‐Chang Zhang, J. Eckert, 2014 .

High strength ultrafine eutectic Fe–Nb–Al composites with enhanced plasticity

Myung-Shin Lee, J. Eckert, Ki Beum Kim, 2008 .

Glass-forming ability, thermal stability of B2 CuZr phase, and crystallization kinetics for rapidly solidified Cu–Zr–Zn alloys

Ivan G. Kaban, J. Eckert, I. Kaban, 2016 .