Tong-Miin Liou

发表

LDV MEASUREMENTS OF THE FLOWFIELD IN A SIMULATED COMBUSTOR WITH AXIAL AND SIDE INLETS

T. Liou, Tong-Miin Liou, Y.-Y. Wu, 1992 .

Numerical visualization and residence time determination of turbulent reacting duct flow with mass bleed and a backstep on one wall

Po-Wen Hwang, Tong-Miin Liou, 1998 .

Effects of stent porosity on hemodynamics in a sidewall aneurysm model.

T. Liou, Tong-Miin Liou, Yi-Chen Li, 2008, Journal of biomechanics.

Developing Heat Transfer and Friction in a Ribbed Rectangular Duct With Flow Separation at Inlet

Jenn-Jiang Hwang, Jenn-Jiang Hwang, T. Liou, 1992 .

Study of the characteristics of polymer droplet deposition in fabricated rectangular microcavities

Chia-Yen Chan, Kuan-Cheng Shih, Tong-Miin Liou, 2009 .

Effects of Impact Inertia and Surface Characteristics on Deposited Polymer Droplets in Microcavities

Chien-Chung Fu, Chia-Yen Chan, Kuan-Cheng Shih, 2008, Journal of Microelectromechanical Systems.

Heat transfer in a smooth-walled reciprocating anti-gravity open thermosyphon

Shyy Woei Chang, W. D. Morris, L. M. Su, 2003 .

Effects of actuating waveform, ink property, and nozzle size on piezoelectrically driven inkjet droplets

Chia-Yen Chan, Kuan-Cheng Shih, Chia-Yen Chan, 2010 .

Large-eddy simulations of turbulent reacting flows in a chamber with gaseous ethylene injecting through the porous wall

Po-Wen Hwang, T. Liou, Tong-Miin Liou, 1994 .

Laser holographic interferometry study of developing heat transfer in a duct with a detached rib array

T. Liou, Tong-Miin Liou, Wen-Bin Wang, 1995 .

Influence of channel height on heat transfer augmentation in rectangular channels with two opposite rib-roughened walls

Shyy Woei Chang, S. Chang, T. Liou, 2005 .

Rotating Effect on Fluid Flow in Two Smooth Ducts Connected by a 180-Degree Bend

T. Liou, Tong-Miin Liou, Chung-Chu Chen, 2003 .

Lattice Boltzmann study of flow pulsation on heat transfer augmentation in a louvered microchannel heat sink

T. Liou, Tong-Miin Liou, Chun-Sheng Wang, 2020 .

Non-intrusive measurements of near-wall fluid flow and surface heat transfer in a serpentine passage

T. Liou, Tong-Miin Liou, Chung-Wei Chen, 2000 .

Heat Transfer Augmentation in a Rectangular Channel With Slit Rib-Turbulators on Two Opposite Walls

Jenn-Jiang Hwang, Tong-Miin Liou, 1997 .

THREE-DIMENSIONAL SIMULATIONS OF THE DROPLET FORMATION DURING THE INKJET PRINTING PROCESS

S. W. Chau, Tong-Miin Liou, Shia-Chung Chen, 2002 .

Study on microchannel flows with a sudden contraction–expansion at a wide range of Knudsen number using lattice Boltzmann method

Chin-Tien Lin, Tong-Miin Liou, 2014 .

LDV Study of Developing Flows Through a Smooth Duct With a 180 deg Straight-Corner Turn

Tong-Miin Liou, Chung-Chu Chen, 1999 .

Effect of ridge shapes on turbulent heat transfer and friction in a rectangular channel

Jenn-Jiang Hwang, Jenn-Jiang Hwang, T. Liou, 1993 .

Influence of entrance geometry on flow field and heat transfer performance in stationary two-pass smooth parallelogram channels

Shyy Woei Chang, S. Chang, T. Liou, 2017 .

Intra-aneurysmal flow with helix and mesh stent placement across side-wall aneurysm pore of a straight parent vessel.

T. Liou, Tong-Miin Liou, Shun-Nan Liou, 2004, Journal of biomechanical engineering.

Downward flame spread over a thick PMMA slab in an opposed flow environment: experiment and modeling

Chiun-Hsun Chen, T. Liou, Tong-Miin Liou, 2003 .

Influenza A virus-specific aptamers screened by using an integrated microfluidic system.

Gwo-Bin Lee, Gwo-Bin Lee, Chih-Hung Wang, 2014, Lab on a chip.

Heat Transfer, Fluid Flow, and Pressure Measurements Inside a Rotating Two-Pass Duct With Detached 90-Deg Ribs

T. Liou, Tong-Miin Liou, Meng-Yu Chen, 2003 .

Heat Transfer and Fluid Flow in a Square Duct With 12 Different Shaped Vortex Generators

Tong-Miin Liou, Chung-Chu Chen, Tzi-Wei Tsai, 2000 .

Effect of included angle on turbulent flow and heat transfer in rhombic serpentine heat exchangers

Tong-Miin Liou, Chun-Sheng Wang, Shu-Po Chan, 2017 .

Numerical and experimental studies on pulsatile flow in aneurysms arising laterally from a curved parent vessel at various angles.

T. Liou, Tong-Miin Liou, Yi-Chen Li, 2007, Journal of biomechanics.

HEAT-TRANSFER IN A RECTANGULAR CHANNEL WITH PERFORATED TURBULENCE PROMOTERS USING HOLOGRAPHIC-INTERFEROMETRY MEASUREMENT

Jenn-Jiang Hwang, Jenn-Jiang Hwang, T. Liou, 1995 .

Effect of fence thickness on pressure drop and heat transfer in a perforated-fenced channel

Jenn-Jiang Hwang, Jenn-Jiang Hwang, T. Liou, 1998 .

Turbulent heat and fluid flow in a passage disturbed by detached perforated ribs of different heights

T. Liou, Tong-Miin Liou, Shih-Hui Chen, 1998 .

Investigation of nanofluids on heat transfer enhancement in a louvered microchannel with lattice Boltzmann method

T. Liou, Tong-Miin Liou, Chun-Sheng Wang, 2018, Journal of Thermal Analysis and Calorimetry.

Simulation and measurement of enhanced turbulent heat transfer in a channel with periodic ribs on one principal wall

Jenn-Jiang Hwang, Jenn-Jiang Hwang, T. Liou, 1993 .

Fluid Flow in a 180 Deg Sharp Turning Duct With Different Divider Thicknesses

T. Liou, Tong-Miin Liou, Chung-Chu Chen, 1998 .

Effects of inlet guide-vane number on flowfields in a side-dump combustor

T. Liou, Tong-Miin Liou, Hsin-Li Lee, 2001 .

Effects of momentum ratio on turbulent nonreacting and reacting flows in a ducted rocket combustor

Y. Y. Wu, L. Chen, T. Liou, 1993 .

Heat Transfer and Friction in a Low-Aspect-Ratio Rectangular Channel with Staggered Slit-Ribbed Walls*

Jenn-Jiang Hwang, Jenn-Jiang Hwang, T. Liou, 1998 .