Xinxin Li

发表

Jiwei Jiao, Tie Li, Yuelin Wang, 2004, Proceedings of IEEE Sensors, 2004..

A novel method to fabricate single crystal nano beams with (111)-oriented Si micromachining

Jiwei Jiao, Tie Li, Yongliang Yang, 2008 .

Concave-suspended high-Q solenoid inductors with a post-CMOS MEMS process in standard wafers

Lei Gu, Xinxin Li, 2007, 2007 IEEE 20th International Conference on Micro Electro Mechanical Systems (MEMS).

On-Chip Integration of Acceleration, Pressure, and Temperature Composite Sensor With a Single-Sided Micromachining Technique

Wei Zhou, Minhang Bao, Xinxin Li, 2011, Journal of Microelectromechanical Systems.

A novel fabrication process of MEMS devices on polyimide flexible substrates

Lufeng Che, Suyan Xiao, Xinxin Li, 2008 .

Wafer-level sandwiched packaging for high-yield fabrication of high-performance mems inertial sensors

Wei Jiang, Xinxin Li, Kun Zhang, 2008, 2008 IEEE 21st International Conference on Micro Electro Mechanical Systems.

Concave-Suspended High-$Q$ Solenoid Inductors With an RFIC-Compatible Bulk-Micromachining Technology

Lei Gu, Xinxin Li, 2007, IEEE Transactions on Electron Devices.

A piezoresistive accelerometer with axially stressed tiny beams for both much increased sensitivity and much broadened frequency bandwidth

Jiwei Jiao, Xiaohong Ge, Lufeng Che, 2003, TRANSDUCERS '03. 12th International Conference on Solid-State Sensors, Actuators and Microsystems. Digest of Technical Papers (Cat. No.03TH8664).

A Post-CMOS Concave-Suspending MEMS Process in Standard Silicon Wafers for High-Performance Solenoidal-DNA-Configured Micro-Transformers

Lei Gu, Xinxin Li, Lei Gu, 2006, 2006 International Electron Devices Meeting.

Detection of trace organophosphorus vapor with a self-assembled bilayer functionalized SiO2 microcantilever piezoresistive sensor.

Songlin Feng, Tiantian Yang, Peng Li, 2006, Analytica chimica acta.

Trace TNT Vapor Detection with an SAM-functionalized Piezoresistive SiO2 Microcantilever

Songlin Feng, Peng Li, Yuelin Wang, 2006, 2006 5th IEEE Conference on Sensors.

A trench-sidewall single-wafer-MEMS technology and its typical application in high-performance accelerometers

Zhaohui Song, Lei Gu, Yuelin Wang, 2004, IEDM Technical Digest. IEEE International Electron Devices Meeting, 2004..

Single-wafer-processed nano-positioning XY-stages with trench-sidewall micromachining technology

Bin Liu, Haifei Bao, Lei Gu, 2006 .

Nanofabrication based on MEMS technology

Jiwei Jiao, Tie Li, Yuelin Wang, 2006, IEEE Sensors Journal.

A micromachining technology for integrating low-loss GHz RF passives on non-high-resistivity low-cost silicon MCM substrate

Zhengzheng Wu, Xinxin Li, Zhengzheng Wu, 2010 .

Study on ultra-thin NEMS cantilevers - high yield fabrication and size-effect on Young's modulus of silicon

T. Ono, M. Esashi, Yuelin Wang, 2002, Technical Digest. MEMS 2002 IEEE International Conference. Fifteenth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.02CH37266).

A micromachined gyroscope with piezoresistance for both high performance Coriolis-effect detection and torsional vibration monitoring

Jiwei Jiao, Ying Zhang, Shusen Huang, 2005, The 13th International Conference on Solid-State Sensors, Actuators and Microsystems, 2005. Digest of Technical Papers. TRANSDUCERS '05..

Micromachined bar-structure gyroscope with high Q-factors for both driving and sensing mode at atmospheric pressure

Jiwei Jiao, Lufeng Che, Bin Xiong, 2003, Proceedings of IEEE Sensors 2003 (IEEE Cat. No.03CH37498).