D. Moser

发表

A powered prosthetic knee joint inspired from musculoskeletal system

Saeed Zahedi, Siamak Najarian, David Moser, 2013 .

A preliminary study on characterisation of finger interface kinetics using a pressure and shear sensor system

Liudi Jiang, D. Moser, N. Hale, 2018, Prosthetics and orthotics international.

The influence of a microprocessor-controlled hydraulic ankle on the kinetic symmetry of trans-tibial amputees during ramp walking: A case series

S. Zahedi, D. Moser, M. McGrath, 2018, Journal of rehabilitation and assistive technologies engineering.

Interfacial pressure and shear sensor system for fingertip contact applications.

Liudi Jiang, Piotr Laszczak, Mike McGrath, 2016, Healthcare technology letters.

Microprocessor knees with ‘standing support’ and articulating, hydraulic ankles improve balance control and inter-limb loading during quiet standing

S. Zahedi, D. Moser, M. McGrath, 2018, Journal of rehabilitation and assistive technologies engineering.

A combined kinematic and kinetic analysis at the residuum/socket interface of a knee-disarticulation amputee.

D. Bader, Liudi Jiang, S. Zahedi, 2017, Medical engineering & physics.

Effects of mass and momentum of inertia alternation on individual muscle forces during swing phase of transtibial amputee gait.

S. Najarian, M. Eslami, Y. Dabiri, 2010, The Kobe journal of medical sciences.

A Musculoskeletal Driven Forward Dynamics Simulation of Swing Phase of Transfemoral Amputee Gait

S. Najarian, Y. Dabiri, S. Zahedi, 2010 .

Kobe University Repository : Kernel タイトル Tit le Effects of Mass and Momentum of Inert ia Alternat ion on Individual Muscle Forces During Swing Phase of Transt ibial Amputee Gait

S. Najarian, M. Eslami, S. Zahedi, 2018 .

A COMPUTER SIMULATION OF THE EFFECT OF MUSCLE LOSS ON HIP JOINT EFFORT DURING THE STANCE PHASE OF TRANSFEMORAL AMPUTEE GAIT

S. Najarian, Y. Dabiri, S. Zahedi, 2011 .

Effect of Muscle Loss on Hip Muscular Effort during the Swing Phase of Transfemoral Amputee Gait: A Simulation Study

S. Najarian, Y. Dabiri, S. Zahedi, 2010 .

Using Perforated Liners to Combat the Detrimental Effects of Excessive Sweating in Lower Limb Prosthesis Users

S. Zahedi, D. Moser, M. McGrath, 2020, Canadian prosthetics & orthotics journal.

The Influence of Perforated Prosthetic Liners on Residual Limb Wound Healing: a Case Report

S. Zahedi, D. Moser, Joe McCarthy, 2019, Canadian prosthetics & orthotics journal.

Development and validation of a 3D-printed interfacial stress sensor for prosthetic applications.

D L Bader, P Laszczak, L Jiang, 2015, Medical engineering & physics.

Development of a residuum/socket interface simulator for lower limb prosthetics

D. Bader, Liudi Jiang, S. Zahedi, 2017, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

USING A SWEATING RESIDUUM/SOCKET INTERFACE SIMULATOR FOR THE EVALUATION OF SWEAT MANAGEMENT LINERS IN LOWER LIMB PROSTHETICS

S. Zahedi, D. Moser, Jinghua Tang, 2021, CANADIAN PROSTHETICS & ORTHOTICS JOURNAL.

Analysis of lower limb prosthetic socket interface based on stress and motion measurements.

D. Bader, Liudi Jiang, S. Zahedi, 2022, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Biomechanical interaction at a transtibial residuum/socket interface during ambulation

K. Devin, D. Moser, L. Jiang, 2022, Gait & Posture.

Towards a Smart Semi-Active Prosthetic Leg: Preliminary Assessment and Testing

Saeed Zahedi, David A. Bradley, David Moser, 2016 .

Dynamic calibration of a gyroscope using a compound pendulum

Saeed Zahedi, David Moser, Mohammed I. Awad, 2011 .

Detection of gait events using an F-Scan in-shoe pressure measurement system.

Paola Catalfamo, Salim Ghoussayni, David Ewins, 2008, Gait & posture.

The Design, Control, and Testing of an Integrated Electrohydrostatic Powered Ankle Prosthesis

Saeed Zahedi, Andrew Plummer, Pejman Iravani, 2019, IEEE/ASME Transactions on Mechatronics.

A VISUAL GUIDE FOR LOWER LIMB PROTHETIC ALIGNMENT

Saeed Zahedi, David Moser, Abbas Dehghani, 2015 .

A Wearable Insole System to Measure Plantar Pressure and Shear for People with Diabetes

C. Nester, D. Bader, Liudi Jiang, 2023, Sensors.

A pressure and shear sensor system for stress measurement at lower limb residuum/socket interface.

D L Bader, P Laszczak, S Zahedi, 2016, Medical engineering & physics.

Motor electrical damping for back-drivable prosthetic knee

David Moser, Saeed Zahedi, Abbas A. Dehghani-Sanij, 2016, 2016 11th France-Japan & 9th Europe-Asia Congress on Mechatronics (MECATRONICS) /17th International Conference on Research and Education in Mechatronics (REM).

Estimation of actuation system parameters for lower limb prostheses

O. M. Querin, David Moser, Saeed Zahedi, 2016, 2016 11th France-Japan & 9th Europe-Asia Congress on Mechatronics (MECATRONICS) /17th International Conference on Research and Education in Mechatronics (REM).

Investigation into Energy Efficiency and Regeneration in an Electric Prosthetic Knee

David Moser, Saeed Zahedi, Abbas A. Dehghani-Sanij, 2017 .

Inertia Properties of a Prosthetic Knee Mechanism

Saeed Zahedi, Mohammed I. Awad, Abbas Dehghani, 2015, TAROS.

Development and validation of a 3D-printed interfacial stress sensor for prosthetic applications.

D. Bader, Liudi Jiang, S. Zahedi, 2015, Medical engineering & physics.

Characterisation of dynamic couplings at lower limb residuum/socket interface using 3D motion capture.

Dan L. Bader, Jinghua Tang, Michael McGrath, 2015, Medical engineering & physics.