Giuseppe Vannini

发表

Development And Application Of A Vertical High Speed Motor-Compressor Simulator For Rotor Drop Onto Auxiliary Bearings.

David Ransom, Andrea Masala, J. Jeffrey Moore, 2009 .

Effect of energy equation in one control-volume bulk-flow model for the prediction of labyrinth seal dynamic coefficients

Paolo Pennacchi, Giuseppe Vannini, Filippo Cangioli, 2018 .

An Improved Catcher Bearing Model and an Explanation of the Forward Whirl/Whip Phenomenon Observed in Active Magnetic Bearing Transient Drop Experiments

J. Jeffrey Moore, Giuseppe Vannini, Jason C. Wilkes, 2013 .

Sensitivity analysis of the one-control volume bulk-flow model for a 14 teeth-on-stator straight-through labyrinth seal

Paolo Pennacchi, Andrea Vania, Steven Chatterton, 2017 .

Investigation of a Rotordynamic Instability in a High Pressure Centrifugal Compressor Due to Damper Seal Clearance Divergence

J. Jeffrey Moore, Giuseppe Vannini, Massimo Camatti, 2006 .

A Rotordynamic, Thermal, and Thrust Load Performance Gas Bearing Test Rig and Test Results for Tilting Pad Journal Bearings and Spiral Groove Thrust Bearings

Giuseppe Vannini, Jongsoo Kim, Aaron M. Rimpel, 2016 .

Review and Upgrade of a Bulk Flow Model for the Analysis of Honeycomb Gas Seals Based on New High Pressure Experimental Data

Giuseppe Vannini, Paola Forte, Diego Saba, 2015 .

Rotordynamic Analysis of a Large Industrial Turbocompressor Including Finite Element Substructure Modeling

J. Jeffrey Moore, Giuseppe Vannini, Massimo Camatti, 2010 .

Rotordynamic Evaluation of Full Scale Rotor on Tilting Pad Bearings With Integral Squeeze Film Dampers

Thomas Alban, Giuseppe Vannini, Matthieu Gerbet, 2012 .

Rotordynamic Analysis of a Large Industrial Turbo-Compressor Including Finite Element Substructure Modeling

J. Jeffrey Moore, Giuseppe Vannini, Massimo Camatti, 2006 .

Numerical Simulation and Full Scale Landing Test of a 12.5MW Vertical Motorcompressor Levitated by Active Magnetic Bearings

Andrea Masala, J. Jeffrey Moore, Giuseppe Vannini, 2011 .

Dynamic Characteristics of the Diverging Taper Honeycomb-Stator Seal

Giuseppe Vannini, Massimo Camatti, Dara W. Childs, 2006 .

Labyrinth Seal and Pocket Damper Seal High Pressure Rotordynamic Test Data

Giuseppe Vannini, Stefano Cioncolini, Giuseppe Del Vescovo, 2013 .

Full Load Testing Of A 12.5 MW Vertical High Speed Subsea Motorcompressor

Andrea Masala, Giuseppe Vannini, Massimo Camatti, 2011 .

Numerical and Experimental Simulation of a Vertical High Speed Motorcompressor Rotor Drop onto Catcher Bearings

Andrea Masala, J. Jeffrey Moore, Giuseppe Vannini, 2009 .

Rotordynamic Computational and Experimental Characterization of a Convergent Honeycomb Seal Tested With Negative Preswirl, High Pressure With Static Eccentricity and Angular Misalignment

Giuseppe Vannini, Carlo Mazzali, Harald Underbakke, 2016 .

Experimental Results and CFD Simulations of Labyrinth and Pocket Damper Seals for Wet Gas Compression

Giuseppe Vannini, Matteo Bertoneri, Kenny Krogh Nielsen, 2015 .

Calibrating a Large Compressor's Rotordynamic Model: Method and Application

Giuseppe Vannini, Anthony J. Smalley, Tim Hattenbach, 2006 .

Analysis Of The Rotordynamic Response Of A Centrifugal Compressor Subject To Aerodynamic Loads Due To Rotating Stall

Giovanni Ferrara, Giuseppe Vannini, Lorenzo Ferrari, 2014 .

Rotordynamic Validation of an Ultra High Speed Multistage Centrifugal Compressor Stacked Rotor

Giuseppe Vannini, 2014 .

A Novel Bulk-flow Model FOR Pocket Damper Seals

Giuseppe Vannini, Filippo Cangioli, Thomas Abraham Chirathadam, 2019 .

Design Validation of High Speed Ratio Epicyclic Gear Technology in Compression Systems

Giuseppe Vannini, Paul Bradley, Shawn Buckley, 2016 .

Dynamic Characterization of Tilting Pad Journal Bearings From Component and System Level Testing

Giuseppe Vannini, Adolfo Delgado, Mirko Librashi, 2012 .

Experimental Results and Computational Fluid Dynamics Simulations of Labyrinth and Pocket Damper Seals for Wet Gas Compression

Giuseppe Vannini, Matteo Bertoneri, Kenny Krogh Nielsen, 2016 .

A Systematic Approach to Estimate the Impact of the Aerodynamic Force Induced by Rotating Stall in a Vaneless Diffuser on the Rotordynamic Behavior of Centrifugal Compressors

Giovanni Ferrara, Giuseppe Vannini, Lorenzo Ferrari, 2013 .

A Novel Hybrid Seal: Design and Experimental Validation on a High Pressure Rotordynamic Test Rig

Giuseppe Vannini, Benjamin Defoy, Carlo Mazzali, 2021, Volume 9A: Structures and Dynamics — Aerodynamics Excitation and Damping; Bearing and Seal Dynamics; Emerging Methods in Design and Engineering.

Instability Of A High Pressure Compressor Equipped With Honeycomb Seals.

Giuseppe Vannini, Massimo Camatti, John W. Fulton, 2003 .

Rotordynamic Force Coefficients for Three Types of Annular Gas Seals With Inlet Preswirl and High Differential Pressure Ratio

Giuseppe Vannini, Adolfo Delgado, Bugra Han Ertas, 2012 .

Analysis of the Rotordynamic Response of a Centrifugal Compressor Subject to Aerodynamic Loads Due to Rotating Stall

Giovanni Ferrara, Giuseppe Vannini, Lorenzo Ferrari, 2015 .

Centrifugal Compressor Rotordynamics in Wet Gas Conditions

Giuseppe Vannini, Melissa Wilcox, Matteo Bertoneri, 2014 .

On the Thermodynamic Process in the Bulk-Flow Model for the Estimation of the Dynamic Coefficients of Labyrinth Seals

Paolo Pennacchi, Andrea Vania, Steven Chatterton, 2017 .

Identification and Prediction of Force Coefficients in a Five-Pad and Four-Pad Tilting Pad Bearing for Load-on-Pad and Load-Between-Pad Configurations

Giuseppe Vannini, Lorenzo Naldi, Adolfo Delgado, 2011 .

Dynamic Characteristics of the Diverging Taper Honeycomb-Stator Seal

Giuseppe Vannini, Massimo Camatti, Dara W. Childs, 2004 .

An Improved Catcher Bearing Model and an Explanation of the Forward Whirl/Whip Phenomenon Observed in Active Magnetic Bearing Transient Drop Experiments

J. Jeffrey Moore, Giuseppe Vannini, Jason C. Wilkes, 2013 .

Development Of A High Pressure Rotordynamic Test Rig For Centrifugal Compressors Internal Seals Characterization

Giuseppe Vannini, Stefano Cioncolini, Vincenzo Calicchio, 2011 .