P. Kah

发表

The effect of the relative location of laser beam and arc in different hybrid welding processes

Paul Kah, Antti Salminen, Jukka Martikainen, 2009 .

Laser Overlap Welding of Zinc-coated Steel on Aluminum Alloy

P. Kah, J. Martikainen, H. Kashani, 2015 .

Hot Cracking Susceptibility of Wrought 6005 and 6082 Aluminum Alloys

P. Kah, J. Martikainen, V. Karkhin, 2011 .

Remote Laser Welding with High Power Fiber Lasers

P. Kah, J. Martikainen, J. Lu, 2013 .

Influence of Alloying Elements on the Low-Temperature Properties of Steel

P. Kah, J. Martikainen, Pavel Layus, 2015 .

Experimental review of thermal analysis of dissimilar welds of High-Strength Steel

François Njock Bayock, P. Kah, Pavel Layus, 2019, REVIEWS ON ADVANCED MATERIALS SCIENCE.

High-strength steel S960QC welded with rare earth nanoparticle coated filler wire

P. Kah, Pavel Layus, C. Vimalraj, 2018, The International Journal of Advanced Manufacturing Technology.

Review of current waveform control effects on weld geometry in gas metal arc welding process

P. Kah, Pavel Layus, B. Mvola, 2018 .

Efficient Welding Technologies Applicable to HSS Arctic Offshore Structures

P. Kah, J. Martikainen, O. O. Aderinola, 2013 .

The analysis of shielding gases in laser–arc hybrid welding processes

A. Salminen, A. Salminen, P. Kah, 2011 .

P. Kah, J. Martikainen, R. Suoranta, 2016 .

Mathematical Morphology Applied to the Cross Section of Microscopic Plant Fiber for Characterization of Geometric Parameters: A Case Study of “Rhektophyllum camerunense”

P. Kah, J. Martikainen, B. Mvola, 2014 .

Effect of Al2O3 film on the mechanical properties of a welded high-strength (AW 7020) aluminium alloy

P. Kah, J. Martikainen, E. Hiltunen, 2016 .

Laser welding of aluminum battery tab to variable Al/Cu busbars in Li-ion battery joint

P. Kah, Ehsan Harati, 2022, AIMS Materials Science.

Fast Solution for the Nonlinear Schrodinger Equation in Optical Fibers by the Reduced Basis Method

P. R. Kiogora, P. Kah, C. Saoke, 2022, International Journal of Mathematics Trends and Technology.

OVERVIEW OF LASER SYSTEMS AND OPTICS APPLICABLE TO HYBRID LASER WELDING OF ALUMINIUM ALLOYS

A. Salminen, P. Kah, M. Olabode, 2015 .

P. Kah, J. Martikainen, R. Suoranta, 2016, The International Journal of Advanced Manufacturing Technology.

Modeling of an artificial intelligence system to predict structural integrity in robotic GMAW of UHSS fillet welded joints

Huapeng Wu, P. Kah, E. Gyasi, 2017, The International Journal of Advanced Manufacturing Technology.

Multi-wire SAW of 640 MPa Arctic shipbuilding steel plates

Paul Kah, Pavel Layus, Jukka Martikainen, 2014 .

Submerged arc welding process peculiarities in application for Arctic structures

P. Kah, B. Ndiwe, P. Layus, 2022, AIMS Materials Science.

Advanced submerged arc welding processes for Arctic structures and ice-going vessels

P. Kah, P. Layus, V. Gezha, 2018 .

Improvement of strength and toughness: The effect on the weldability of high-strength steels used in offshore structures

P. Kah, J. Martikainen, M. A. Kesse, 2017 .

Effect of heat input on dissimilar welds of ultra high strength steel and duplex stainless steel: Microstructural and compositional analysis

P. Kah, J. Martikainen, H. Tasalloti, 2017 .

Numerical and Experimental Investigation of the Heat Input Effect on the Mechanical Properties and Microstructure of Dissimilar Weld Joints of 690-MPa QT and TMCP Steel

François Njock Bayock, P. Kah, V. Karkhin, 2019, Metals.

State-of-the-art of advanced gas metal arc welding processes: Dissimilar metal welding

P. Kah, J. Martikainen, R. Suoranta, 2015 .

P. Kah, J. Martikainen, B. Mvola, 2014 .

Heat input effects on mechanical constraints and microstructural constituents of MAG and laser 316L austenitic stainless-steel welded joints

François Njock Bayock, P. Kah, Kibong Marius Tony, 2022, AIMS Materials Science.

Thermal induced residual stress and microstructural constituents of dissimilar S690QT high-strength steels and 316L austenitic stainless steel weld joints

P. Kah, Francois Njock Bayock, M. Kibong, 2021, Materials Research Express.

CURRENT TRENDS IN WELDING PROCESSES AND MATERIALS: IMPROVE IN EFFECTIVENESS

J. Martikainen, P. Kah, P. Kah, 2012 .

Influence of shielding gases in the welding of metals

Paul Kah, Jukka Martikainen, P. Kah, 2013 .

Feasibility study of welding dissimilar Advanced and Ultra High Strength Steels

A. Salminen, François Njock Bayock, P. Kah, 2020 .

Factors influencing Al-Cu weld properties by intermetallic compound formation

P. Kah, J. Martikainen, R. Suoranta, 2015 .

Experimental Review on Friction Stir Welding of Aluminium Alloys with Nanoparticles

P. Kah, C. Vimalraj, 2021, Metals.

Investigation of weld defects in friction-stir welding and fusion welding of aluminium alloys

P. Kah, J. Martikainen, R. Suoranta, 2015, International Journal of Mechanical and Materials Engineering.

Trends in Joining Dissimilar Metals by Welding

P. Kah, J. Martikainen, M. Shrestha, 2013 .

Assessment of arc stability features for selected gas metal arc welding conditions

P. Kah, B. Ndiwe, Gabriel Ogheneluona Edigbe, 2022, SN Applied Sciences.

Welding of dissimilar non-ferrous metals by GMAW processes

P. Kah, J. Martikainen, B. Mvola, 2014, International Journal of Mechanical and Materials Engineering.

Study of the sensitivity of high-strength cold-resistant shipbuilding steels to thermal cycle of arc welding

P. Kah, E. Khlusova, P. Layus, 2018, International Journal of Mechanical and Materials Engineering.

Recrystallization-based formation of uniform fine-grained austenite structure before polymorphic transition in high-strength steels for Arctic applications

A. Zisman, P. Kah, S. Golosienko, 2016, International Journal of Mechanical and Materials Engineering.

Modeling of an artificial intelligence system to predict structural integrity in robotic GMAW of UHSS fillet welded joints

Huapeng Wu, Paul Kah, Emmanuel Afrane Gyasi, 2017 .

Influence of shielding gases in the welding of metals

P. Kah, J. Martikainen, 2012, The International Journal of Advanced Manufacturing Technology.

Welding of Ultra High Strength Steels

Paul Kah, Jukka Martikainen, Markku Pirinen, 2013 .

Evaluation of applicability of thick E500 TMCP and F500W QT steel plates for Arctic service

Paul Kah, Pavel Layus, Jukka Martikainen, 2016 .

Effects of shielding gas control: welded joint properties in GMAW process optimization

P. Kah, B. Mvola, 2017 .

Effects of shielding gas control: welded joint properties in GMAW process optimization

P. Kah, B. Mvola, 2016, The International Journal of Advanced Manufacturing Technology.

Effect of Heat Input and Undermatched Filler Wire on the Microstructure and Mechanical Properties of Dissimilar S700MC/S960QC High-Strength Steels

François Njock Bayock, P. Kah, B. Mvola, 2019, Metals.

Virtual Reality Enabled Manufacturing of Challenging Workpieces

Mika Lohtander, Paul Kah, Juha Varis, 2019, Procedia Manufacturing.

Quality assurance and process control in virtual reality

Mika Lohtander, Paul Kah, Juha Varis, 2019, Procedia Manufacturing.

Characterization of bainite-ferrite structures formed on the heat-affected zone of a dissimilar welds of high-strength steel (S700MC/S960QC) and their dependency on cooling time

François Njock Bayock, P. Kah, X. Cai, 2020 .

Investigation of weld defects in friction-stir welding and fusion welding of aluminium alloys

P. Kah, J. Martikainen, R. Suoranta, 2015 .

Aluminium alloys welding processes: Challenges, joint types and process selection

Paul Kah, Jukka Martikainen, P. Kah, 2013 .

Approaches for Underwater Welding Control to Achieve Quality Welds

P. Kah, S. Parshin, P. Layus, 2017 .

TRENDS IN ALUMINIUM ALLOY DEVELOPMENT AND THEIR JOINING METHODS

P. Kah, J. Martikainen, B. Mvola, 2016 .

Advanced gas metal arc welding processes

Paul Kah, Jukka Martikainen, Raimo Suoranta, 2013 .

Connection Between the Number of Complaints About Welding Suppliers and End Product Quality: The Case of Customized Welding Production

Paul Kah, Harri Eskelinen, Jukka Martikainen, 2016 .

Factors influencing Al-Cu weld properties by intermetallic compound formation

P. Kah, J. Martikainen, R. Suoranta, 2015, International Journal of Mechanical and Materials Engineering.

An integrated DFMA–PDM model for the design and analysis of challenging similar and dissimilar welds

Paul Kah, Harri Eskelinen, Jukka Martikainen, 2016 .

THE INFLUENCE OF PARAMETERS ON PENETRATION, SPEED AND BRIDGING IN LASER HYBRID WELDING

Paul Kah, Jukka Martikainen, Antti Salminen, 2011 .

Usability of laser–arc hybrid welding processes in industrial applications

Paul Kah, P. Kah, 2011 .

Quality Requirements and Conformity of Welded Products in the Manufacturing Chain in Welding Network

Paul Kah, Jukka Martikainen, Jenni Toivanen, 2015 .

Review of current waveform control effects on weld geometry in gas metal arc welding process

P. Kah, B. Mvola, P. Layus, 2018, The International Journal of Advanced Manufacturing Technology.

Effect of Welding Parameters on Weld Bead Shape for Welds Done Underwater

P. Kah, J. Martikainen, J. E. Omajene, 2014 .

Fundamental Difficulties Associated With Underwater Wet Welding

P. Kah, J. Martikainen, M. Pirinen, 2014 .

Intelligent Control Mechanism for Underwater Wet Welding

Huapeng Wu, Joshua Emuejevoke Omajene, Paul Kah, 2015 .

Optimization of underwater wet welding process parameters using neural network

Huapeng Wu, P. Kah, J. Martikainen, 2014 .

Optimization of underwater wet welding process parameters using neural network

Huapeng Wu, Joshua Emuejevoke Omajene, Paul Kah, 2014, International Journal of Mechanical and Materials Engineering.

Artificial Neural Network Controlled GMAW System: Penetration and Quality Assurance in a Multi-Pass Butt Weld Application

Paul Kah, Harri Eskelinen, Juho Ratava, 2019, The International Journal of Advanced Manufacturing Technology.

Robotic arc welding sensors and programming in industrial applications

P. Kah, J. Martikainen, E. Hiltunen, 2015 .

Applications and benefits of adaptive pulsed GMAW

Paul Kah, Jukka Martikainen, B. Mvola, 2014 .

Weldability Of Thermo-Mechanically Rolled Steels Used In Oil And Gas Offshore Structures

P. Kah, J. Martikainen, J. E. Omajene, 2014 .

Real-Time Weld Process Monitoring

Paul Kah, Pavel Layus, Esa Hiltunen, 2014 .

Real Time Non-Destructive Testing Methods of Welding

Paul Kah, Jukka Martikainen, Raimo Suoranta, 2014 .

Usability of arc types in industrial welding

P. Kah, J. Martikainen, R. Suoranta, 2014 .

Improving the Use of Robotic Welding of Aluminum Boats through Modularization

Paul Kah, Esa Hiltunen, Jukka Martikainen, 2014 .

Experimental investigation of welding of aluminum alloys profiles and wrought plate by FSW

P. Kah, J. Martikainen, E. Hiltunen, 2009 .

EFFECT OF NANOMATERIAL ADDITION USING GMAW AND GTAW PROCESSES

P. Kah, B. Mvola, C. Vimalraj, 2016 .

Study of the sensitivity of high-strength cold-resistant shipbuilding steels to thermal cycle of arc welding

P. Kah, E. Khlusova, P. Layus, 2018 .

Survey on artificial intelligence (AI) applied in welding: A future scenario of the influence of AI on technological, economic, educational and social changes

Heikki Handroos, Paul Kah, Emmanuel Afrane Gyasi, 2019, Procedia Manufacturing.

Peculiarities of Welding Technical Requirements for Arctic Applications

Paul Kah, Pavel Layus, Jukka Martikainen, 2015 .

Welding of dissimilar non-ferrous metals by GMAW processes

P. Kah, J. Martikainen, B. Mvola, 2014 .

Effects of welding wire and torch weaving on GMAW of S355MC and AISI 304L dissimilar welds

Paul Kah, Jukka Martikainen, H. Tasalloti, 2014 .

Optimization of GMAW Process Parameters in Ultra-High-Strength Steel Based on Prediction

P. Kah, Francois Njock Bayock, A. Netto, 2023, Metals.

Welding management as a tool for innovative, competitive and sustainable manufacturing: Case study - West Africa

Paul Kah, Jukka Martikainen, Emmanuel Afrane Gyasi, 2014 .

A New Approach to Manage Welding Quality in Supply Chain Networks: A Supplier Network Complaints Perspective

Paul Kah, Harri Eskelinen, Jukka Martikainen, 2017 .