Zhijiang Wang

发表

The effect of welding speed on microstructures of cold metal transfer deposited AZ31 magnesium alloy clad

Shengsun Hu, H. Zhang, Zhijiang Wang, 2015 .

Sensing of the weld penetration at the beginning of pulsed gas metal arc welding

Bai Pengfei, Shengsun Hu, Ying Liang, 2017 .

3D Dynamic Finite Element Analysis of the Nonuniform Residual Stress in Ultrasonic Impact Treatment Process

Dongpo Wang, Shengsun Hu, Zhijiang Wang, 2016, Journal of Materials Engineering and Performance.

Numerical analysis of the residual stress in ultrasonic impact treatment process with single-impact and two-impact models

Dongpo Wang, Shengsun Hu, Zhijiang Wang, 2015 .

Dynamic molten pool behavior of pulsed gas tungsten arc welding with filler wire in horizontal position and its characterization based on arc voltage

Shaojie Wu, Shengsun Hu, Zhijiang Wang, 2022, Journal of Manufacturing Processes.

Welding current influences on Inconel 625/X65 cladding interface

Shengsun Hu, Zhijiang Wang, Kunyang Song, 2018 .

Sensing and characterization of backside weld geometry in surface tension transfer welding of X65 pipeline

Shaojie Wu, Shengsun Hu, Zhijiang Wang, 2022, Journal of Manufacturing Processes.

Numerical investigation on the influences of molten pool behavior on weld penetration depth in pulsed gas metal arc welding

Shengsun Hu, Zhijiang Wang, Yichen Wang, 2020, Engineering Research Express.

Fabrication and characterization of stainless steel 308 L / Inconel 625 functionally graded material with continuous change in composition by dual-wire arc additive manufacturing

Zhenwen Yang, Shengsun Hu, Zhijiang Wang, 2022, Journal of Alloys and Compounds.

Effects of trace Nb addition on microstructure and properties of Ti–6Al–4V thin-wall structure prepared via cold metal transfer additive manufacturing

J. Gou, Junqi Shen, Shengsun Hu, 2020 .

Arc characteristics and metal transfer modes in arcing-wire gas tungsten arc welding

Qifeng Xu, Shengsun Hu, Zhijiang Wang, 2016 .

Microstructure and mechanical properties of twin wire and arc additive manufactured Ni3Al-based alloy

Zongqing Ma, Ying Wang, Zhenwen Yang, 2022, Journal of Materials Processing Technology.

Effect of ultrasonic vibration of molten pool on microstructure and mechanical properties of Ti-6Al-4V joints prepared via CMT + P welding

Shengsun Hu, Zhijiang Wang, G. Zhao, 2020 .

The arc characteristics of cold metal transfer welding with AZ31 magnesium alloy wire

Shengsun Hu, H. Zhang, Zhijiang Wang, 2016 .

Effects of ultrasonic peening treatment in three directions on grain refinement and anisotropy of cold metal transfer additive manufactured Ti-6Al-4V thin wall structure

J. Gou, Junqi Shen, Shengsun Hu, 2020, Journal of Manufacturing Processes.

Microstructure evolution and mechanical properties of cold metal transfer additive manufactured Ti–6Al–4V wall with trace MoSi2 addition

W. Lu, J. Gou, Junqi Shen, 2020 .

Research on root appearance and fatigue life of steel catenary riser (SCR) using GMAW/GTAW-P double-sided root welding process

Shaojie Wu, Zhijiang Wang, F. Cheng, 2022, International Journal of Pressure Vessels and Piping.

Effects of ultrasonic vibration in the CMT process on welded joints of Al alloy

Junqi Shen, Shengsun Hu, Zhijiang Wang, 2018, Journal of Materials Processing Technology.

Observations of repair process by friction stitch welding in simulated wet conditions—Flaws, microstructure and hardness evolutions in overlapping welds

Han Zhu, Zhijiang Wang, L. Cui, 2019, Journal of Materials Processing Technology.

Hot cracking during the fabrication of Inconel 625/stainless steel 308 L functionally graded material by dual-wire arc additive manufacturing

Zhenwen Yang, Shengsun Hu, Zhijiang Wang, 2022, Journal of Manufacturing Processes.

Finite element analysis of residual stress evolution with multiple impacts on one point in ultrasonic impact treatment process

Chaoqun Huang, Shengsun Hu, Zhijiang Wang, 2018 .

Effect of cold metal transfer mode on the microstructure and machinability of Ti–6Al–4V alloy fabricated by wire and arc additive manufacturing in ultra-precision machining

Yuchao Bai, J. Gou, Junqi Shen, 2022, Journal of Materials Research and Technology.

Microstructure and mechanical properties of wire and arc additive manufactured Ti-6Al-4V and AlSi5 dissimilar alloys using cold metal transfer welding

J. Gou, Junqi Shen, Shengsun Hu, 2019, Journal of Manufacturing Processes.

Modeling of weld penetration control system in GMAW-P using NARMAX methods

Shengsun Hu, Wandong Wang, Zhijiang Wang, 2021 .

Finite element analysis of the effect of the controlled parameters on plate forming induced by ultrasonic impact forming (UIF) process

Shengsun Hu, Zhijiang Wang, Chao Guo, 2015 .

Repair of arc welded DH36 joint by underwater friction stitch welding

W. Xu, Zhijiang Wang, Jun Cao, 2017 .

Robotic seam tracking system based on vision sensing and human-machine interaction for multi-pass MAG welding

Jie Liu, Shengsun Hu, Zhijiang Wang, 2020 .

Microstructure and mechanical properties of friction stitch welds of DH36 steel in local dry conditions

Zhijiang Wang, Jun Cao, Dong-po Wang, 2017 .

Microstructure and mechanical properties of friction stitch welds of DH36 steel in local dry conditions

Zhijiang Wang, Jun Cao, Dong-po Wang, 2017, The International Journal of Advanced Manufacturing Technology.

Improving bonding quality of underwater friction stitch welds by selecting appropriate plug material and welding parameters and optimizing joint design

W. Xu, C. Deng, Zhijiang Wang, 2016 .

Feasibility study on sensing and prediction of backside weld geometry in cold metal transfer welding of X65 pipeline in the vertical-up position

Feng Wang, Shaojie Wu, Zhijiang Wang, 2023, Journal of Manufacturing Processes.

Adaptive Predictive Control of Backside Weld Width in Pulsed Gas Metal Arc Welding Using Electrical Characteristic Signals as Feedback

Shengsun Hu, Zhijiang Wang, Tao Wang, 2023, IEEE Transactions on Control Systems Technology.