M. Saito

发表

Numerical simulation of intermediate-temperature direct-internal-reforming planar solid oxide fuel cell

Hiroshi Iwai, Y. Yamamoto, H. Iwai, 2011 .

Quantitative evaluation of solid oxide fuel cell porous anode microstructure based on focused ion be

Hiroshi Iwai, Masashi Kishimoto, Hideo Yoshida, 2011 .

Change of an anode's microstructure morphology during the fuel starvation of an anode-supported solid oxide fuel cell

H. Iwai, G. Brus, H. Yoshida, 2015 .

Quantification of SOFC anode microstructure based on dual beam FIB-SEM technique

Hiroshi Iwai, Masashi Kishimoto, Nobuhide Kasagi, 2010 .

Direct reforming of Methane–Ammonia mixed fuel on Ni–YSZ anode of solid oxide fuel cells

H. Iwai, H. Yoshida, M. Saito, 2020 .

Local evolution of anode microstructure morphology in a solid oxide fuel cell after long-term stack operation

H. Iwai, A. Sciazko, J. Szmyd, 2015 .

An Analysis of a Micro Cogeneration System Composed of Solid Oxide Fuel Cell, Microturbine, and H2O/LiBr Absorption Refrigerator

Hideo Yoshida, Akio Ueda, Motohiro Saito, 2007 .

Development of 1 kW‐class Ammonia‐fueled Solid Oxide Fuel Cell Stack

T. Matsui, H. Muroyama, M. Saito, 2020, Fuel Cells.

Mesoscale-structure control at anode/electrolyte interface in solid oxide fuel cell

H. Iwai, H. Yoshida, Kuniaki Yoshikata, 2011 .

Comparative Study of Ammonia‐fueled Solid Oxide Fuel Cell Systems

T. Matsui, A. Srifa, H. Muroyama, 2017 .

Numerical prediction of system round-trip efficiency and feasible operating conditions of small-scale solid oxide iron–air battery

H. Iwai, H. Yoshida, M. Saito, 2016 .

BASIC CHARACTERISTICS OF HYBRID GAS BEARING WITH WATER EVAPORATION FROM ULTRA-FINE POROUS MEDIUM

H. Yoshida, M. Saito, Hiroki Matsui, 2004 .

Exchange current model for (La0.8Sr0.2)0.95MnO3 (LSM) porous cathode for solid oxide fuel cells

H. Iwai, H. Yoshida, M. Saito, 2016 .

A corrugated mesoscale structure on electrode–electrolyte interface for enhancing cell performance in anode-supported SOFC

H. Iwai, H. Yoshida, M. Saito, 2011 .

Effect of Characteristic Lengths of Electron, Ion and Gas Diffusion on Electrode Performance and Electrochemical Reaction Area

H. Iwai, H. Yoshida, M. Saito, 2012 .

Description of reaction rate for steam methane reforming throughout a channel in combination with diffusion in a porous catalytic wall: Extension to concentration variation along flow direction

H. Iwai, H. Yoshida, M. Saito, 2017 .

Comprehensive Method for Evaluating Reaction Rates of Steam Methane Reforming on Catalyst-Coated Channel Surface with Consideration of Limiting Steps

H. Iwai, H. Yoshida, J. Kojima, 2013 .

Deduction of Proper Reaction Rate of Steam Methane Reforming over Catalyst Surface Validated with a Combination of One- and Two-Dimensional Simulations

H. Iwai, H. Yoshida, M. Saito, 2012 .

Combining structural, electrochemical, and numerical studies to investigate the relation between microstructure and the stack performance

H. Iwai, J. Szmyd, G. Brus, 2017, Journal of Applied Electrochemistry.

Comprehensive understanding of the active thickness in solid oxide fuel cell anodes using experimental, numerical and semi-analytical approach

H. Iwai, H. Yoshida, M. Saito, 2014 .

Charge-transfer distribution model applicable to stack simulation of solid oxide fuel cells

H. Iwai, J. Szmyd, G. Brus, 2018 .

Development of a charge-transfer distribution model for stack simulation of solid oxide fuel cells

H. Iwai, J. Szmyd, G. Brus, 2016 .

Improvement in the Electrochemical Performance of Anode‐supported Solid Oxide Fuel Cells by Meso‐ and Nanoscale Structural Modifications

H. Seo, M. Saito, M. Kishimoto, 2020, Fuel Cells.

Physicochemical impedance modeling of solid oxide fuel cell anode as an alternative tool for equivalent circuit fitting

H. Iwai, H. Yoshida, M. Saito, 2019, Journal of Power Sources.

Chromium poisoning in (La,Sr)MnO3 cathode: Three-dimensional simulation of a solid oxide fuel cell

H. Iwai, H. Yoshida, M. Saito, 2016 .

Effect of Composition Ratio of Ni‐YSZ Anode on Distribution of Effective Three‐Phase Boundary and Power Generation Performance

M. Saito, M. Kishimoto, H. Iwai, 2013 .

Three-Dimensional Simulation of SOFC Anode Polarization Characteristics Based on Sub-Grid Scale Modeling of Microstructure

H. Iwai, H. Yoshida, M. Saito, 2012 .

Quantification of Ni-YSZ Anode Microstructure Based on Dual Beam FIB-SEM Technique

H. Iwai, N. Shikazono, N. Kasagi, 2009, ECS Transactions.

Consideration of boundary conditions of porous catalyst in numerical simulation with elementary reaction scheme of catalytic combustion

M. Saito, 2019, International Journal of Hydrogen Energy.

Charge-transfer distribution model applicable to stack simulation of solid oxide fuel cells

J. Szmyd, G. Brus, H. Yoshida, 2017, Heat and Mass Transfer.

Microextrusion printing for increasing electrode–electrolyte interface in anode-supported solid oxide fuel cells

H. Iwai, C. Ding, H. Yoshida, 2020 .

High-Efficiency Internal Combustion Engine with Exergy Regenerating Combustion.

Kenichi P. Kobayashi, Ryozo Echigo, H. Yoshida, 1999 .

Performance evaluation of a direct-biogas solid oxide fuel cell-micro gas turbine (SOFC-MGT) hybrid combined heat and power (CHP) system

Hiroshi Iwai, Hideo Yoshida, Suranat Wongchanapai, 2013 .

Quantitative Evaluation of Transport Properties of SOFC Porous Anode by Random Walk Process

H. Iwai, H. Yoshida, M. Saito, 2009, ECS Transactions.

Local Evolution of Triple Phase Boundary in Solid Oxide Fuel Cell Stack After Long‐term Operation

Hiroshi Iwai, Grzegorz Brus, Janusz S. Szmyd, 2015 .

Power generation enhancement of solid oxide fuel cell by cathode–electrolyte interface modification in mesoscale assisted by level set-based optimization calculation

Takayuki Yamada, Hiroshi Iwai, Shinji Nishiwaki, 2011 .

Tortuosity of an SOFC anode estimated from saturation currents and a mass transport model in comparison with a real micro-structure

H. Iwai, G. Brus, H. Yoshida, 2014 .

Improvement of the sub-grid-scale model designed for 3D numerical simulation of solid oxide fuel cell electrodes using an adaptive power index

Hiroshi Iwai, Masashi Kishimoto, Hideo Yoshida, 2013 .

Microstructural Change of Ni–GDC Cermet Anode in the Electrolyte‐supported Disk‐type SOFC upon Daily Start‐up and Shout‐down Operations

N. Shikazono, N. Kasagi, T. Matsui, 2012 .

The limiting process in steam methane reforming with gas diffusion into a porous catalytic wall in a flow reactor

H. Iwai, H. Yoshida, J. Kojima, 2015 .

Numerical Model of Sulfur Poisoning on LSCF Cathode and Its Application to a 2-D Single Cell Simulation

H. Iwai, K. Yamaji, H. Yokokawa, 2019, ECS Transactions.

Selection of suitable operating conditions for planar anode-supported direct-internal-reforming solid-oxide fuel cell

Hiroshi Iwai, Hideo Yoshida, Suranat Wongchanapai, 2012 .

Three-Dimensional Simulation of SOFC Anode Polarization Characteristics Based on Sub-Grid Scale Modeling of Microstructure

H. Iwai, H. Yoshida, M. Saito, 2012 .

Three-Dimensional Simulation of SOFC Anode Polarization Characteristics Based on Sub-Grid Scale Model

M. Saito, M. Kishimoto, Hiroshi Iwai, 2019, ECS Transactions.