Liangchi Zhang

发表

A statistical model for material removal prediction in polishing

Liangchi Zhang, X. L. Jin, Liangchi Zhang, 2012 .

Microstructure, elastic modulus and shear strength of alumina (Al2O3) nanoparticles-doped tin–silver–copper (Sn–Ag–Cu) solders on copper (Cu) and gold/nickel (Au/Ni)-plated Cu substrates

Y. C. Chan, Asit Kumar Gain, Y. Chan, 2015, Journal of Materials Science: Materials in Electronics.

Tool wear and its effect on the surface integrity in the machining of fibre-reinforced polymer composites

Weixing Xu, Liangchi Zhang, Weixing Xu, 2018 .

Grinding–hardening using dry air and liquid nitrogen: Prediction and verification of temperature fields and hardened layer thickness

Thai Nguyen, Thai Nguyen, Liangchi Zhang, 2010 .

Microstructure, thermal analysis and damping properties of Ag and Ni nano-particles doped Sn–8Zn–3Bi solder on OSP–Cu substrate

Asit Kumar Gain, Liangchi Zhang, A. K. Gain, 2014 .

Performance of a new segmented grinding wheel system

Liangchi Zhang, Liangchi Zhang, Thai Nguyen, 2009 .

Residual stresses in thin film systems: Effects of lattice mismatch, thermal mismatch and interface dislocations

Haihui Ruan, Mei Liu, Mei Liu, 2013 .

Material properties of a new hybrid fibre-reinforced engineered cementitious composite

Khin T. Soe, Yan Zhang, Liangchi Zhang, 2013 .

An Analytical Equivalent Circuit Model for Optimization Design of a Broadband Piezoelectric Micromachined Ultrasonic Transducer With an Annular Diaphragm

Zhuangde Jiang, Guoxi Luo, Libo Zhao, 2019, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control.

Adiabatic shear banding in AISI 1045 steel during high speed machining: Mechanisms of microstructural evolution

Chunzheng Duan, Liangchi Zhang, C. Duan, 2012 .

Predicting the wear of hard-on-hard hip joint prostheses

Liangchi Zhang, M. Uddin, Liangchi Zhang, 2013 .

EFFECT OF CUTTING CONDITIONS ON THE SERRATED CHIP FORMATION IN HIGH-SPEED CUTTING

Chongyang Gao, Liangchi Zhang, Liangchi Zhang, 2013 .

Prediction of the Hardened Layer in Traverse Cylindrical Grinding-Hardening

Thai Nguyen, Thai Nguyen, Liangchi Zhang, 2011 .

Harsh service environment effects on the microstructure and mechanical properties of Sn–Ag–Cu-1 wt% nano-Al solder alloy

Asit Kumar Gain, Liangchi Zhang, A. K. Gain, 2016, Journal of Materials Science: Materials in Electronics.

On the mechanics and material removal mechanisms of vibration-assisted cutting of unidirectional fibre-reinforced polymer composites

Weixing Xu, Liangchi Zhang, Weixing Xu, 2014 .

MACHINING DAMAGE IN UNIDIRECTIONAL FIBRE-REINFORCED PLASTICS

Liangchi Zhang, Liangchi Zhang, Xiangming Wang, 1999 .

An assessment of the applicability of cold air and oil mist in surface grinding

Liangchi Zhang, Liangchi Zhang, Thai Nguyen, 2003 .

Interfacial microstructure, wettability and material properties of nickel (Ni) nanoparticle doped tin–bismuth–silver (Sn–Bi–Ag) solder on copper (Cu) substrate

Asit Kumar Gain, Liangchi Zhang, A. K. Gain, 2016, Journal of Materials Science: Materials in Electronics.

The effect of rough surface on nanoscale high speed grinding by a molecular dynamics simulation

Qihong Fang, Liangchi Zhang, Jia Li, 2015 .

Thermal aging effects on microstructures and mechanical properties of an environmentally friendly eutectic tin-copper solder alloy

Asit Kumar Gain, Liangchi Zhang, A. K. Gain, 2016 .

Chemical Effect on the Material Removal Rate in the CMP of Silicon Wafers

Liangchi Zhang, Liangchi Zhang, Yong Guang Wang, 2010 .

Machining of metal matrix composites: effect of ceramic particles on residual stress, surface roughness and chip formation

Joseph A. Arsecularatne, Alokesh Pramanik, Liangchi Zhang, 2008 .

Chemical Effect on the Material Removal Rate in the CMP of Silicon Wafers

Liangchi Zhang, Yong Guang Wang, Altabul Biddut, 2010 .

On the Polishing Techniques of Diamond and Diamond Composites

Liangchi Zhang, Yiqing Chen, 2009 .

Prediction of the threshold load of dislocation emission in silicon during nanoscratching

Qihong Fang, Liangchi Zhang, Q. Fang, 2013 .

Predicting the Material Removal in Polishing: The Applicability of Two Types of Statistical Models

X. L. Jin, Liangchi Zhang, L. C. Zhang, 2014 .

Constitutive modelling of plasticity of fcc metals under extremely high strain rates

Liangchi Zhang, Liangchi Zhang, C. Y. Gao, 2012 .

Scratching of copper with rough surfaces conducted by diamond tip simulated using molecular dynamics

Qihong Fang, Liangchi Zhang, Jia Li, 2015 .

Effect of Cyclic Heating on the Hardened Layer Properties Generated by Plunge Cylindrical Grinding

Mei Liu, Thai Nguyen, Thai Nguyen, 2014 .

Investigate on distribution and scatter of surface residual stress in ultra-high speed grinding

Qihong Fang, Liangchi Zhang, Q. Fang, 2014 .

Microstructure, mechanical and electrical performances of zirconia nanoparticles-doped tin-silver-copper solder alloys

Asit Kumar Gain, Liangchi Zhang, A. K. Gain, 2016, Journal of Materials Science: Materials in Electronics.

Energy efficiency in rock cutting

J. Lunn, C. Melmeth, Liangchi Zhang, 2011 .

Effect of thin gold/nickel coating on the microstructure, wettability and hardness of lead-free tin–bismuth–silver solder

Asit Kumar Gain, Liangchi Zhang, A. K. Gain, 2017, Journal of Materials Science: Materials in Electronics.