Donghua Dai

发表

Selective laser melting 3D printing of Ni-based superalloy: understanding thermodynamic mechanisms

Guanqun Yu, Mujian Xia, D. Gu, 2016 .

Influence of scan strategy and molten pool configuration on microstructures and tensile properties of selective laser melting additive manufactured aluminum based parts

Chen Hong, Reinhart Poprawe, R. Poprawe, 2018 .

Structural optimization of re-entrant negative Poisson's ratio structure fabricated by selective laser melting

D. Gu, D. Dai, Hongyu Chen, 2017 .

Selective Laser Melting Additive Manufacturing of Novel Aluminum Based Composites With Multiple Reinforcing Phases

Fei Chang, D. Gu, D. Dai, 2015 .

On the role of processing parameters in thermal behavior, surface morphology and accuracy during laser 3D printing of aluminum alloy

Guanqun Yu, Mujian Xia, D. Gu, 2016 .

Influence of thermodynamics within molten pool on migration and distribution state of reinforcement during selective laser melting of AlN/AlSi10Mg composites

D. Gu, D. Dai, Dongdong Gu, 2016 .

Laser additive manufacturing of ultrafine TiC particle reinforced Inconel 625 based composite parts: Tailored microstructures and enhanced performance

Chen Hong, Reinhart Poprawe, Moritz Alkhayat, 2015 .

A Multiscale Understanding of the Thermodynamic and Kinetic Mechanisms of Laser Additive Manufacturing

Mujian Xia, D. Gu, D. Dai, 2017 .

Selective Laser Melting Additive Manufacturing of TiC/AlSi10Mg Bulk-form Nanocomposites with Tailored Microstructures and Properties

Pengpeng Yuan, Fei Chang, Yves-Christian Hagedorn, 2014 .

Tailoring surface quality through mass and momentum transfer modeling using a volume of fluid method in selective laser melting of TiC/AlSi10Mg powder

D. Gu, D. Dai, Dongdong Gu, 2015 .

Porosity evolution and its thermodynamic mechanism of randomly packed powder-bed during selective laser melting of Inconel 718 alloy

Guanqun Yu, Mujian Xia, D. Gu, 2017 .

Thermal behavior and densification mechanism during selective laser melting of copper matrix composites: Simulation and experiments

D. Gu, D. Dai, Dongdong Gu, 2014 .

Laser additive manufacturing of nano-TiC reinforced Ni-based nanocomposites with tailored microstructure and performance

Chen Hong, Reinhart Poprawe, Mujian Xia, 2019, Composites Part B: Engineering.

On the role of powder flow behavior in fluid thermodynamics and laser processability of Ni-based composites by selective laser melting

Mujian Xia, D. Gu, D. Dai, 2019, International Journal of Machine Tools and Manufacture.

Particulate migration behavior and its mechanism during selective laser melting of TiC reinforced Al matrix nanocomposites

Pengpeng Yuan, D. Gu, D. Dai, 2015 .