J. Roux

发表

Mie scattering by spheres in an absorbing medium: Erratum

J. A. Roux, A. Smith, W. Mundy, 1974 .

Rheological characteristics and cure kinetics of EPON 862/W epoxy used in pultrusion

J. A. Roux, J. Roux, J. G. Vaughan, 1997 .

Numerical Simulation of Pressure Variation and Resin Flow in Injection Pultrusion

J. A. Roux, Sameer S. Rahatekar, S. Rahatekar, 2003 .

Manufacturing Modeling of Three-Dimensional Resin Injection Pultrusion Process Control Parameters for Polyester/Glass Rovings Composites

J. Roux, A. Jeswani, 2007 .

Impact of Fiber Volume Fraction and Resin Viscosity With Die-Detached Tapered Chamber in Resin Injection Pultrusion

J. Roux, A. Jeswani, 2010 .

Fiber Volume Fraction Influence on Fiber Compaction in Tapered Resin Injection Pultrusion Manufacturing

J. Roux, A. Jeswani, N. B. Masuram, 2016, Applied Composite Materials.

HEAT TRANSFER ANALYSIS OF FIBROUS INSULATIONS WITH AND WITHOUT RADIANT BARRIERS FOR SUMMER CONDITIONS

J. Rish, J. Roux, 1986 .

Comparison of Measurements and Modeling for Pultrusion of a Fiberglass/Epoxy I-Beam

J. Bruce, J. Roux, R. Shanku, 1998 .

Effects of Pull Speed on Die Wall Temperatures for Flat Composites of Various Sizes

J. Roux, J. Vaughan, E. Arafat, 1996 .

SOLAR REFLECTANCE OF CRYODEPOSITS, PART I: H20 ON LN2-COOLED BLACK PAINT

B. Wood, A. Smith, B. Seiber, 1978 .

Infrared transmission of contaminated cryocooled optical windows

A. Smith, H. Scott, J. Roux, 1978 .

Impact of Processing Parameters and Tapering of Injection Chamber Walls in Resin Injection Pultrusion

J. Roux, A. Jeswani, 2007 .

Numerical Modeling of Processing Parameters for Slot and Discrete Port Tapered Configurations in Resin Injection Pultrusion

J. Roux, A. Jeswani, 2007 .

Numerical Modelling of Design Parameters for Manufacturing Polyester/Glass Composites by Resin Injection Pultrusion

J. Roux, A. Jeswani, 2006 .

Manufacturing Modeling of 3-D Resin Injection Pultrusion Process Control Parameters for Polyester/Glass Rovings Composites

J. Roux, A. Jeswani, 2006 .

Pull Speed Influence on Fiber Compaction and Wetout in Tapered Resin Injection Pultrusion Manufacturing

J. Roux, A. Jeswani, N. B. Masuram, 2017 .

Fibre Volume Fraction and Chamber Length Impact on Detached versus Attached Resin Injection Pultrusion

D. R. Palikhel, J. Roux, A. Jeswani, 2012 .

Effect of Injection Slot Location on Die-Detached Tapered Injection Chamber in Resin Injection Pultrusion

J. Roux, A. Jeswani, 2011 .

Multiple Injection Ports and Part Thickness Impact on Wetout of High Pull Speed Resin Injection Pultrusion

J. Roux, J. Vaughan, A. Jeswani, 2009 .

Permeability Impact on the Pressure Rise in a Pultrusion Die

J. Roux, J. Vaughan, K. Raper, 1999 .

Infrared optical properties of thin H 2 O, NH 3 , and CO 2 cryofilms

J. A. Roux, B. Wood, J. Roux, 1982 .

IR optical properties of thin H2O, NH3, and CO2 cryofilms

B. Wood, A. Smith, J. Roux, 1979 .

Infrared Optical Properties of Solid Mixtures of Molecular Species at 20 K

B. Wood, K. F. Palmer, J. Roux, 1983 .

Manufacturing model for three-dimensional irregular pultruded graphite/epoxy composites

J. A. Roux, J. Roux, J. G. Vaughan, 1996 .

Die-Attached Versus Die-Detached Resin Injection Chamber for Pultrusion

D. R. Palikhel, J. Roux, A. Jeswani, 2013, Applied Composite Materials.

Heat Transfer Analysis of Fiberglass Insulations With and Without Foil Radiant Barriers

J. Rish, J. Roux, 1987 .

Biangular reflectance for an absorbing and isotropically scattering medium

A. Smith, J. Roux, 1985 .

Finite element analysis of radiative transport in fibrous insulation

A. Smith, J. Roux, H. Yeh, 1983 .

Determination of radiative properties from transport theory and experimental data

A. Smith, J. Roux, 1981 .

Radiative Transfer with Anisotropic Scattering and Arbitrary Temperature for Plane Geometry

A. Smith, J. Roux, D. C. Todd, 1975 .

Radiative Transport Analysis for Plane Geometry with Isotropic Scattering and Arbitrary Temperature

A. Smith, J. Roux, 1974 .

Comparison of Three Techniques for Solving the Radiative Transport Equation

A. Smith, J. Roux, 1973 .

Radiative transfer properties of high albedo CO2 and H2O cryodeposits

A. Smith, J. Roux, F. Shahrokhi, 1972 .

Radiative Heat Transfer of Coatings on a Cryogenic Surface

J. Roux, 1971 .

Analysis of Cryodeposit Mixtures

B. Wood, K. F. Palmer, J. Roux, 1980 .

Thermal Model for Three-Dimensional Irregular Shaped Pultruded Fiberglass Composites

J. A. Roux, J. Roux, J. G. Vaughan, 1996 .

Infrared Optical Properties of Thin CO, NO, CH4, HC1, N2O, O2, N2, Ar, and Air Cryofilms

B. Wood, A. Smith, J. Roux, 1983 .

Investigation of the pressure behavior in a pultrusion die for graphite/epoxy composites

J. A. Roux, T. A. McCarty, J. Roux, 1999 .

Die and post-die temperature and cure in graphite/epoxy composites

J. A. Roux, J. Roux, J. G. Vaughan, 1996 .

Optical Properties of Bipropellant Exhaust Constituents Condensed at 77 K

A. M. Smith, R. E. Alt, B. Wood, 1979 .

Resin Viscosity Influence on Fiber Compaction in Tapered Resin Injection Pultrusion Manufacturing

J. Roux, A. Jeswani, N. B. Masuram, 2018, Applied Composite Materials.

Effect of Resin Viscosity in Fiber Reinforcement Compaction in Resin Injection Pultrusion Process

J. A. Roux, J. Roux, A. Jeswani, 2013, Applied Composite Materials.

The impact of pultrusion processing parameters on resin pressure rise inside a tapered cylindrical die for glass-fibre/epoxy composites

T. A. McCarty, J. Roux, S. U. K. Gadam, 2000 .

Fluid mechanics analysis of a two‐dimensional pultrusion die inlet

T. A. McCarty, J. Roux, J. Vaughan, 1998 .

Investigation of Dynamic Pressure Behavior in a Pultrusion Die

T. A. McCarty, J. Roux, J. Vaughan, 1998 .

Pultrusion die pressure response to changes in die inlet geometry

T. A. McCarty, J. Roux, J. Vaughan, 1998 .

Effect of Fiber Volume Fraction in Fiber Reinforcement Compaction in Resin Injection Pultrusion Process

J. Roux, A.L. Jeswani, N. Shakya, 2016 .

Impact of Injection Slot Width and Final Composite Thickness for Attached-Die and Detached-Die Tapered Resin Injection Pultrusion

J. Roux, A. Jeswani, S. Ranjit, 2013, Applied Composite Materials.

Modeling of Processing for Slot and Discrete Port Tapered Resin Injection Pultrusion

J. Roux, A. Jeswani, 2008 .

Three-Dimensional Characterization of Pultruded Fiberglass-Epoxy Composite Materials

J. A. Roux, J. Roux, J. G. Vaughan, 1995 .

Resin Flow, Cure and Heat Transfer Analysis for Pultrusion Process

Ravi Gorthala, J. A. Roux, J. Roux, 1994 .

Die Inlet Contour Impact on the Pressure Rise in a Pultrusion Die

T. A. McCarty, J. Roux, J. Vaughan, 2000 .

Spectral Infrared Reflectance of H,O Condensed on LN,-Cooled Surfaces in Vacuum

B. Wood, A. Smith, B. Seiber, 1971 .

Infrared optical properties of solid monomethyl hydrazine, N 2 O 4 , and N 2 H 4 at cryogenic temperatures

J. A. Roux, B. Wood, J. Roux, 1983 .

Transmission of infrared materials and condensed gases at cryogenic temperatures

A. Smith, H. Scott, J. Roux, 1977 .

Infrared Optical Properties of Bipropellant Cryocontaminants

B. Wood, A. Smith, J. Roux, 1979 .

Thermal Management of a High Packing Density Array of Power Amplifiers Using Liquid Cooling

J. Roux, Z. Williams, 2007 .

GRAPHITE FOAM THERMAL MANAGEMENT OF A HIGH PACKING DENSITY ARRAY OF POWER AMPLIFIERS

J. Roux, Z. Williams, 2006 .