A. Figueiredo

发表

Analysis of the physical processes associated with junction fires at laboratory and field scales

J. Sharples, D. Viegas, J. Raposo, 2018 .

Numerical Study of the Cyclic Behavior of a Desiccant Layer of a Hygroscopic Rotor

José J. Costa, A. R. Figueiredo, J. Costa, 2008 .

On the behaviour of hygroscopic wheels: Part II – rotor performance

José J. Costa, A. R. Figueiredo, Celestino R. Ruivo, 2007 .

Heat transfer measurements in a rotor–stator system with three-dimensional non-axisymmetric flow conditions

A. M. Raimundo, A. Figueiredo, L. Oliveira, 2002 .

Numerical simulation and experimental validation of heat transfer within rotating flows for three‐dimensional non‐axisymmetric, turbulent conditions

A. M. Raimundo, A. Figueiredo, L. Oliveira, 2002 .

Analysis of the performances of heat exchangers used in hot-water stores

António M. Raimundo, A. R. Figueiredo, A. M. Raimundo, 1996 .

Experimental and mathematical study of the discontinuous drying kinetics of pears

R. Guiné, J. Costa, A. Figueiredo, 2014 .

Torsional fretting wear experimental analysis of a R3 offshore steel against a PC/ABS blend

F. Pires, A. Figueiredo, T. Doca, 2019, Tribology International.

Thermal Analysis and Drying Kinetics of Olive Bagasse

F. Freire, A. Figueiredo, 1999 .

Modeling and simulation of wetted porous thermal barriers operating under high temperature or high heat flux

Vitor A. F. Costa, A. R. Figueiredo, A. Figueiredo, 2008 .

On the validity of lumped capacitance approaches for the numerical prediction of heat and mass transfer in desiccant airflow systems

J. Costa, A. Figueiredo, C. Ruivo, 2008 .

Correlations for the mass transfer coefficient in desiccant matrices when using linear driving force and pseudo-gas-side-controlled models

J. Costa, A. Figueiredo, C. Ruivo, 2014 .

Comparative assessment of the linear driving force and pseudo-gas-side-controlled models for the prediction of mass transfer in desiccant matrices

J. Costa, A. Figueiredo, C. Ruivo, 2014 .

Influence of the atmospheric pressure on the mass transfer rate of desiccant wheels.

J. Costa, A. Figueiredo, C. Ruivo, 2011 .

External forced convection around a circular cylinder near a plane boundary

D. Viegas, A. Figueiredo, 1988 .

PH—Postharvest Technology: Modelling High Temperature, Thin Layer, Drying Kinetics of Olive Bagasse

Fausto Freire, Paulo Ferrão, P. Ferrão, 2001 .

Personal protective clothing and safety of firefighters near a high intensity fire front

António M. Raimundo, A. R. Figueiredo, A. M. Raimundo, 2009 .

Heat and Mass Transfer in Desiccant Wheels

Celestino Ruivo, José Costa, António Rui Figueiredo, 2011 .

Validity of pseudo-gas-side-controlled models to predict the behaviour of desiccant matrices

J. Costa, A. Figueiredo, C. Ruivo, 2009 .

On the behaviour of hygroscopic wheels: Part I - channel modelling

José J. Costa, A. R. Figueiredo, Celestino R. Ruivo, 2007 .

Analysis of Simplifying Assumptions for the Numerical Modeling of the Heat and Mass Transfer in a Porous Desiccant Medium

José J. Costa, A. R. Figueiredo, A. Figueiredo, 2006 .

EXPERIMENTAL ANALYSIS OF THE DRYING KINETICS OF A FOOD PRODUCT

P. Ferrão, F. Freire, A. Figueiredo, 1998 .

Agricultural solar air collectors: Design and performances

A. R. Figueiredo, J. Fohr, A. Figueiredo, 1987 .

A control‐volume based finite element method for three‐dimensional incompressible turbulent fluid flow, heat transfer, and related phenomena

A. Figueiredo, V. Costa, L. Oliveira, 1995 .

Parametric study of the cyclic behaviour of a hygroscopic matrix in a desiccant airflow system

A. Figueiredo, C. Ruivo, J. Costa, 2011 .

Numerical study of the influence of the atmospheric pressure on the heat and mass transfer rates of desiccant wheels

J. Costa, A. Figueiredo, C. Ruivo, 2011 .

Heat and Mass Transfer in Matrices of Hygroscopic Wheels

J. Costa, A. Figueiredo, C. Ruivo, 2012 .

Study of the aerodynamic sealing of a cold store – Experimental and numerical approaches

A. R. Figueiredo, J. C. Gonçalves, J. C. Gonçalves, 2012 .

CFD modelling of aerodynamic sealing by vertical and horizontal air curtains

A. R. Figueiredo, J. C. Gonçalves, J. C. Gonçalves, 2012 .

Effectiveness parameters for the prediction of the global performance of desiccant wheels – An assessment based on experimental data

José J. Costa, Celestino R. Ruivo, A. R. Figueiredo, 2012 .

Study of three-stage intermittent drying of pears considering shrinkage and variable diffusion coefficient

J. Nunes, T. Ribeiro, J. Costa, 2016 .