J. Park

发表

Prediction of Failure Mode in Hole Clinching of Al Alloy and Advanced High-Strength Steel

D. Ko, Chan-Joo Lee, Byung-Min Kim, 2016 .

Fabrication of miniature helical gears by powder extrusion using gas atomized Zn−22%Al powder

Byung-Min Kim, Jung-Min Lee, Kyung-Hun Lee, 2012 .

Microstructure and mechanical properties of AM50 alloy according to thickness and forming condition of the products by a high pressure die-casting process

C. Kang, J. Park, 2013 .

Structural analysis of woven-fabric composite considering changes in degrees of in-plane shear deformation during manufacturing process

Y. Moon, D. Ko, Jeong-Min Lee, 2021 .

Evaluation Of Microbial Risk In Soil Amended With Organic Fertilizers From Stabilized Swine Manure Waste

J. Park, Il Han, Y. Lee, 2007 .

Metamodel-based optimization of a control arm considering strength and durability performance

Kwon-Hee Lee, Joon Hong Park, Young Chul Park, 2010, Comput. Math. Appl..

Microbial Community Analysis using RDP II (Ribosomal Database Project II):Methods, Tools and New Advances

J. Tiedje, J. Cole, E. Cardenas, 2009 .

Blowdown prediction of a conventional pressure relief valve with a simplified dynamic model

Joon Hong Park, Young Chul Park, Xue-Guan Song, 2013, Math. Comput. Model..

Control of surface temperature of an aluminum alloy billet by air flow during a heating process at elevated temperature

J. Park, Young Choi, 2016 .

Prediction of the Delamination at the Steel and CFRP Interface of Hybrid Composite Part

D. Ko, Jae-Hong Kim, J. Park, 2021, Materials.

Formability of CFRTP prepreg considering heat transfer

D. Ko, Byung-Min Kim, Jeong-Min Lee, 2017 .

Structural design examples using metamodel-based approximation model

Jin-Hwan Lee, Seok-Cheol Hwang, Joon Hong Park, 2010 .

Development of a partition panel of an Al6061 sheet metal part for the improvement of formability and mechanical properties by hot forming quenching

Dae-Cheol Ko, Joon-Hong Park, Jae-Hong Kim, 2017 .

Design of Lightweight CFRP Automotive Part as an Alternative for Steel Part by Thickness and Lay-Up Optimization

D. Ko, Byung-Min Kim, Jeong-Min Lee, 2019, Materials.

Performance comparison and erosion prediction of jet pumps by using a numerical method

Joon Hong Park, Young Chul Park, Seung-Gyu Kim, 2013, Math. Comput. Model..

Effect of a Multiple Reduction Die on the Residual Stress of Drawn Materials

D. Ko, Sang-Kon Lee, J. Park, 2021, Materials.

A study on press forming of automotive sub-frame parts using extruded aluminum profile

Yunseon Choi, G. H. Oh, Joon Hong Park, 2007 .

Prediction and control of front-end curvature in hot finish rolling process

Byung-Min Kim, Kyung-Hun Lee, Dae-Cheol Ko, 2015 .