A. Georgiadis

发表

Strategies for Correcting the Workpiece Deformation during the Manufacturing at the Milling Process

A. Georgiadis, M. Eggebrecht, T. Wagner, 2014 .

Analysis of brittle layer forming mechanism in Ti6Al4V sloping structures by SLM technology

Yuhui Chen, Jianxiu Liu, A. Georgiadis, 2018, The International Journal of Advanced Manufacturing Technology.

Influence of the pandemic dissemination of COVID-19 on radiotherapy practice: A flash survey in Germany, Austria and Switzerland

Melanie Reuter-Oppermann, A. Georgiadis, R. Müller-Polyzou, 2020, PloS one.

Ecological sustainability – a customer requirement? Evidence from the automotive industry

Anthimos Georgiadis, Jörg Hetterich, A. Georgiadis, 2012 .

Parametric Finite Element Model and Mechanical Characterisation of Electrospun Materials for Biomedical Applications

E. Mazgajczyk, P. Heikkilä, A. Georgiadis, 2021, Materials.

Verification of measuring the bearing clearance using kurtosis, recurrences and neural networks and comparison of these approaches

G. Litak, Nicolas Meier, A. Georgiadis, 2019, 2019 IEEE SENSORS.

Experimental Verification of the Impact of Radial Internal Clearance on a Bearing’s Dynamics

A. Syta, Nicolas Meier, A. Gassner, 2022, Sensors.

Optical Part Measuring inside a Milling Machine

Nicolas Meier, A. Georgiadis, 2014 .

Analysis of brittle layer forming mechanism in Ti6Al4V sloping structures by SLM technology

Zhi-Li Zhang, Yuhui Chen, A. Georgiadis, 2018, The International Journal of Advanced Manufacturing Technology.

The optical decay of high l rydberg states in beam foil excited o7

A. Georgiadis, P. Brentano, R. Ahmad-bitar, 1982 .

Multiphoton ionization of magnesium and calcium atoms by short and intense laser pulses

C. Fotakis, V. Zafiropulos, A. Georgiadis, 1991 .

Digital twin support for laser-based assembly assistance

Anthimos Georgiadis, Nicolas Meier, Ralf Müller-Polyzou, 2021 .

Mechanical characterisation and modelling of electrospun materials for biomedical applications

Anthimos Georgiadis, Katarzyna Polak-Krasna, Pirjo Heikkila, 2015, 2015 IEEE International Symposium on Medical Measurements and Applications (MeMeA) Proceedings.

The influence of the radial internal clearance on the dynamic response of self-aligning ball bearings

G. Litak, A. Syta, Nicolas Meier, 2022, Mechanical Systems and Signal Processing.

Analysis of Dynamic Response of a Two Degrees of Freedom (2-DOF) Ball Bearing Nonlinear Model

Grzegorz Litak, Anthimos Georgiadis, Nicolas Meier, 2021, Applied Sciences.

Radial internal clearance analysis in ball bearings

Grzegorz Litak, Anthimos Georgiadis, Arkadiusz Syta, 2021, Eksploatacja i Niezawodnosc - Maintenance and Reliability.

Towards a decision support system for radiotherapy business continuity in a pandemic crisis

Melanie Reuter-Oppermann, A. Georgiadis, R. Müller-Polyzou, 2021, J. Decis. Syst..

Elemental analysis using electron beam‐induced K X‐rays

J. Sens, A. Georgiadis, A. Pape, 1987 .

Measurement of the Lamb shift in hydrogenic sulfur by laser spectroscopy

H. Sträter, J. Sens, A. Georgiadis, 1986 .

Combining model predictive and adaptive control for an atomic force microscope piezo-scanner-cantilever system

Paolo Mercorelli, Anthimos Georgiadis, Carlos Fuhrhop, 2013, 2013 IEEE International Symposium on Sensorless Control for Electrical Drives and Predictive Control of Electrical Drives and Power Electronics (SLED/PRECEDE).

Project-Mentoring in Engineering Education - A competence-oriented teaching and learning approach

Brit-Maren Block, Anthimos Georgiadis, A. Georgiadis, 2012, Proceedings of the 2012 IEEE Global Engineering Education Conference (EDUCON).

Identification of multi-fault in rotor-bearing system using spectral kurtosis and EEMD

Wenliao Du, Anthimos Georgiadis, Xiaoyun Gong, 2017 .

FACILITY FOR ANTIPROTON AND ION RESEARCH SPARC Collaboration Technical Design Report: Experimental Instrumentation of CRYRING@ESR

A. Ehresmann, C. Weinheimer, R. Reifarth, 2016 .

FACILITY FOR ANTIPROTON AND ION RESEARCH SPARC COLLABORATION TECHNICAL DESIGN REPORT -FINAL VERSION- THE SPECTRAP EXPERIMENT

A. Ehresmann, C. Weinheimer, R. Reifarth, 2015 .

imaging and nanoindentation of polymer of intrinsic microporosity PIM-1.

C. Bowen, T. Mays, A. Georgiadis, 2017 .

Patient Positioning in Radiotherapy

Zhen Chen, Anthimos Georgiadis, Nicolas Meier, 2020, 2020 IEEE International Symposium on Medical Measurements and Applications (MeMeA).

Tool wear monitoring and prediction in micro milling process for medical applications. Experimental analysis and characterization of tool wear for titanium materials

A. Georgiadis, T. Wagner, A. Barceló, 2014 .

Intelligent Diagnostics of Radial Internal Clearance in Ball Bearings with Machine Learning Methods

A. Syta, Nicolas Meier, A. Georgiadis, 2023, Sensors.

Short-arc measurement and fitting based on the bidirectional prediction of observed data

Anthimos Georgiadis, Xiaojie Xu, Zhigen Fei, 2016 .

On the Functional Controllability Using a Geometric Approach together with a Decoupled MPC for Motion Control in Robotino

Paolo Mercorelli, Anthimos Georgiadis, Daniel Straßberger, 2014 .

Comparing data scaling based recursive least squares algorithms with Kalman Filter for nano parameters identification

Paolo Mercorelli, Manuel Schimmack, Anthimos Georgiadis, 2014, Proceedings of 2014 International Conference on Modelling, Identification & Control.

Sensitivity of trace-element analysis by X-ray emission induced by 0.1–10 MeV electrons

A. Georgiadis, A. Pape, M. Vourkas, 1990 .

Automatic Assembling of Bearings Including Clearance Measurement

Anthimos Georgiadis, Nicolas Meier, Nicolas Meier, 2016 .