J. Xing

发表

Artificial neural network prediction of retained austenite content and impact toughness of high-vanadium high-speed steel (HVHSS)

Xu Liujie, Shizhong Wei, Shizhong Wei, 2006 .

Optimization of heat treatment technique of high-vanadium high-speed steel based on back-propagation neural networks

Xu Liujie, Shizhong Wei, Shizhong Wei, 2007 .

A study on the crack control of a high-speed steel roll fabricated by a centrifugal casting technique

H. Fu, Q. Xiao, J. Xing, 2008 .

Statistic Modeling and Optimization of the Track in Plasma Cladding Process

J. Xing, Jianyong Liu, Daxin Zeng, 2014, Journal of Thermal Spray Technology.

Dry sliding wear behavior of Fe3Al alloys prepared by mechanical alloying and plasma activated sintering

Yimin Gao, J. Xing, Jian Wang, 2010 .

Effect of rare earth and titanium additions on the microstructures and properties of low carbon Fe–B cast steel

H. Fu, Q. Xiao, J. Xing, 2007 .

On the preparation and mechanical properties of in situ small-sized TiB2/Al-4.5Cu composites via ultrasound assisted RD method

Zhiwei Liu, Yimin Gao, Qingyou Han, 2018, Journal of Alloys and Compounds.

Ultrasound assisted in-situ casting technique for synthesizing small-sized blocky Al3Ti particles reinforced A356 matrix composites with improved mechanical properties

Xiaohan Dai, Zhiwei Liu, Yi Cao, 2018 .

Investigation of flowing liquid zinc erosion and corrosion properties of the Fe–B alloy at various times

H. Fu, Shengqiang Ma, J. Xing, 2015 .

Artificial neural network prediction on wear properties of high vanadium high speed steel (HVHSS) rolls

J. Xing, R. Long, L.-J. Xu, 2007 .

Effect of phase stability on the wear resistance of white cast iron at 800 °C

Yimin Gao, E. Wang, J. Xing, 2002 .

Inter-phase corrosion of chromium white cast irons in dynamic state

L. Fang, A. Zhang, J. Xing, 2004 .

Theoretical study on the stability and mechanical property of Cr7C3

Y. H. Chen, B. Xiao, Yinggang Li, 2008 .

Effect of fluctuation, modification and surface chill on structure of 20%Cr hypereutectic white cast iron

H. Fu, J. Xing, Yuan Gao, 2009 .

Effect of Aluminum on Borocarbides and Temper Softening Resistance of High-Boron High-Speed Steel

H. Fu, J. Xing, Shuli Tang, 2018, Metallurgical and Materials Transactions A.

Arc Erosion Behavior of Cu–0.23Be–0.84Co Alloy after Heat Treatment: An Experimental Study

K. Song, Zhou Li, J. Xing, 2016, Acta Metallurgica Sinica (English Letters).

Precipitation behavior and properties of aged Cu-0.23Be-0.84Co alloy

K. Song, J. Xing, Yan-Jun Zhou, 2016 .

Mechanical Properties and Fracture Behavior of Cu-Co-Be Alloy after Plastic Deformation and Heat Treatment

K. Song, Zhou Li, J. Xing, 2016 .

Effect of crystal orientation on microstructure and properties of bulk Fe_2B intermetallic

H. Fu, D. Yi, Yefei Li, 2015 .

Solidification process, microstructure, and mechanical properties of Cr-doped high boron Fe-based alloy

Tonghai Wu, J. Xing, Zhifu Huang, 2021, Materials Chemistry and Physics.

Microstructure, mechanical properties and toughening mechanism of directional Fe2B crystal in Fe-B alloy with trace Cr addition

J. Xing, Zhifu Huang, Jialin Sun, 2020 .

Effect of chromium-induced (Fe, Cr)3C toughness improvement on the two-body abrasive wear behaviors of white cast iron

J. Xing, Wei Li, X. Tu, 2020 .

Investigation on abrasive wear behavior of Fe B alloys containing various molybdenum contents

H. Fu, D. Yi, J. Xing, 2019, Tribology International.

Effects of cooling rate on microstructure, mechanical properties, and residual stress of Fe-2.1B (wt%) alloy

H. Fu, D. Yi, J. Xing, 2019, Materials Science and Engineering: A.

Effects of chromium on the morphology and mechanical properties of Fe2B intermetallic in Fe-3.0B alloy

Yimin Gao, J. Xing, Zhifu Huang, 2018, Journal of Materials Science.

Effects of Chromium Addition on Preparation and Properties of Bulk Cementite

J. Xing, X. Fan, Zhifu Huang, 2016 .

Two-body abrasion resistance of cementite containing different chromium concentrations

J. Xing, Zhifu Huang, Baochao Zheng, 2016 .

Effect of Titanium Modification on Microstructure and Impact Toughness of High-Boron Multi-Component Alloy

H. Fu, J. Xing, Shuli Tang, 2021, Metals.

Effect of solidification rate on microstructure and toughness of Ca-Ti modified high boron high speed steel

H. Fu, J. Xing, Y. Yi, 2019, Materials Science and Engineering: A.

Effect of calcium modification on solidification, heat treatment microstructure and toughness of high boron high speed steel

H. Fu, Qi Zhang, J. Xing, 2018, Materials Research Express.

Formation of Eutectic Borocarbides in High Boron High Speed Steel during Non‐Equilibrium Crystallization

H. Fu, J. Xing, X. Ren, 2018, steel research international.

Effect of niobium on the as-cast microstructure of hypereutectic high chromium cast iron

H. Fu, B. Xiao, J. Xing, 2008 .

Accelerated Cavitation Damage of Steels in Liquid Metal Environments

H. Fu, Shizhong Wei, Shengqiang Ma, 2018, Cavitation - Selected Issues.

Interfacial morphologies and erosion–corrosion behavior of directional Fe-3.5 wt.% B steel in flowing liquid Zn containing 0.30 wt.% Al

H. Fu, Shengqiang Ma, J. Xing, 2016 .

Effect of orientation and lamellar spacing of Fe 2 B on interfaces and corrosion behavior of Fe-B alloy in hot-dip galvanization

H. Fu, Yefei Li, G. Liu, 2016 .

Interface characterization and erosion–corrosion behavior of directional Fe-3.5 wt.% B steel in flowing liquid zinc at various temperatures

Shengqiang Ma, J. Xing, Yaping Bai, 2016 .

Erosion–corrosion interaction of Fe–B alloy in flowing zinc

S. Ma, Youfa Wang, J. Xing, 2016 .

Effect of Fe 2 B orientation on erosion–corrosion behavior of Fe–3.5wt.% B steel in flowing zinc

Shengqiang Ma, J. Xing, Yaping Bai, 2015 .

Effect of 0.3 wt.% Al Addition in Flowing Liquid Zinc on the Erosion-Corrosion Behavior of Fe-3.5 wt.% B Alloy

H. Fu, Shengqiang Ma, J. Xing, 2015, Journal of Materials Engineering and Performance.

Interface characteristics and corrosion behaviour of oriented bulk Fe2B alloy in liquid zinc

H. Fu, Yefei Li, Shengqiang Ma, 2014 .

Interfacial morphology and corrosion resistance of Fe–B cast steel containing chromium and nickel in liquid zinc

H. Fu, D. Yi, Zhiyun Zhang, 2011 .

Effect of titanium on the as-cast microstructure of hypereutectic high chromium cast iron

H. Fu, Yimin Gao, J. Xing, 2008 .

Effect of heat treatment on microstructure and mechanical properties of a Ti-bearing hypereutectic high chromium white cast iron

H. Fu, Yimin Gao, B. Xiao, 2008 .

Effect of titanium on the morphology of primary M7C3 carbides in hypereutectic high chromium white iron

H. Fu, J. Xing, X. Zhi, 2007 .

Effect of cerium on the as-cast microstructure of a hypereutectic high chromium cast iron

H. Fu, J. Xing, Jiyun Peng, 2008 .

Microstructure and crystallography of borides and mechanical properties of Fe–B–C–Cr–Al alloys

H. Fu, Shengqiang Ma, J. Xing, 2016 .

Effects of chromium addition on corrosion resistance of Fe–3.5B alloy in liquid zinc

H. Fu, D. Yi, Zhiyun Zhang, 2011 .

Effect of graphite morphology on the tensile strength and thermal conductivity of cast iron

Yefei Li, J. Xing, D. Tao, 2018, Materials Characterization.

First principles study on the structural properties and electronic structure of X2B (X = Cr, Mn, Fe, Co, Ni, Mo and W) compounds

Y. H. Chen, B. Xiao, J. Xing, 2009 .

Microstructure and mechanical properties of Fe3Al alloys prepared by MA-PAS and MA-HP

Hui-ping Tang, J. Xing, Jian Wang, 2011 .

Effect of fabrication methods on microstructure and mechanical properties of Fe3Al-based alloys

J. Xing, Jian Wang, Li Cao, 2009 .

The stability and elastic constants of X2Ni3Si (X=Ti, Mo and W): The novel ternary metal silicides

Jing Chen, B. Xiao, R. Zhou, 2009 .

Processing and tensile properties of A356 composites containing in situ small-sized Al 3 Ti particulates

Jianhua Wu, Zhiwei Liu, Yimin Gao, 2018 .

Effect of molybdenum addition on fracture toughness and hardness of Fe2B in Fe–B–C cast alloy

J. Xing, Zhifu Huang, X. Tao, 2012 .

Stability, electronic and mechanical properties of Fe2B

B. Xiao, J. Xing, W. Su, 2008 .

A Review on Binderless Tungsten Carbide: Development and Application

Yimin Gao, J. Xing, Hejie Yang, 2019, Nano-Micro Letters.

Sonochemical combustion synthesis of purer Ti2AlC from Ti–Al–C system

Zhiwei Liu, Yimin Gao, Qingyou Han, 2016 .

Internal oxidation of dilute Cu–Al alloy powers with oxidant of Cu2O

Ping Liu, K. Song, J. Xing, 2004 .

Effect of 4wt.% Cr on microstructure, corrosion resistance and tribological properties of Fe3Al–20wt.%Al2O3 composites

Yimin Gao, Shengqiang Ma, J. Xing, 2013 .

Effect of Cr on Microstructure, Mechanical Properties, and Wear Behavior of In Situ 20 wt.%Al2O3/Fe-25Al Composites

S. Ma, J. Xing, Yongchun Guo, 2015, Journal of Materials Engineering and Performance.

Study on preparation and mechanical properties of Fe3Al–20wt.%Al2O3 composites

Yimin Gao, S. Ma, J. Xing, 2012 .

Effects of Trace Si Addition on the Microstructure Evolution and Mechanical Properties of Moalb Ceramic

Jianyue Zhang, J. Xing, Zhifu Huang, 2023, SSRN Electronic Journal.

Preparation, microstructure and mechanical properties of MoAlB-0.15% Si ceramics with superior strength and toughness

Jian Wang, J. Xing, Zhifu Huang, 2021, Ceramics International.

Effects of Doped Elements (Si, Cr, W and Nb) on the Stability, Mechanical Properties and Electronic Structures of MoAlB Phase by the First-Principles Calculation

J. Xing, Zhifu Huang, Yongxin Jian, 2020, Materials.

Microstructure and properties of hypereutectic high chromium white cast iron prepared under pressure

X. Cheng, Z. Huang, J. Xing, 2011 .

Influence of boron contents on oxidation behavior and the diffusion mechanism of Fe–B based alloys at 1073 K in air

H. Fu, Shengqiang Ma, J. Xing, 2016 .

Comparative investigation on the stability, electronic structures and mechanical properties of Mo2FeB2 and Mo2NiB2 ternary borides by first-principles calculations

J. Xing, Zhifu Huang, Yongxin Jian, 2019 .

Phase stability, mechanical properties and electronic structures of Ti Al binary compounds by first principles calculations

Liang Sun, J. Xing, Zhifu Huang, 2019, Materials Chemistry and Physics.

Effect of cerium modification on microstructure and properties of hypereutectic high chromium cast iron

S. Ma, J. Xing, X. Zhi, 2014 .

Effects of Boride Orientation and Si Content on High-Temperature Oxidation Resistance of Directionally Solidified Fe–B Alloys

J. Jia, X. Cui, Shengqiang Ma, 2022, Materials.

Investigations on microstructures and properties of B containing cast steel for wear resistance applications

Y. Lei, H. Fu, J. Xing, 2008 .

Comparative Study on Wear Behaviors of Metal-Impregnated Carbon Material and C/C Composite Under Electrical Sliding

Yongzheng Zhang, J. Xing, Jiandong Xing, 2010 .

Tribological characteristics of Si3N4–hBN ceramic materials sliding against stainless steel without lubrication

Yimin Gao, J. Xing, Wei Chen, 2010 .

A first principles study of adhesion and electronic structure at Fe (110)/graphite (0001) interface

Yefei Li, Liang Sun, J. Xing, 2017 .

Static Corrosion Behavior of In-Situ Nanocrystalline Al2O3/Fe(Al) Composites

Yimin Gao, J. Xing, Yongchun Guo, 2017 .

Tribological behavior of in-situ (Cr, Mo)/Fe3Al-20 wt.%Al2O3 composites at elevated temperatures

Yimin Gao, S. Ma, J. Xing, 2014 .

Bulk Cr7C3 compound fabricated by mechanical ball milling and plasma activated sintering

Shengqiang Ma, J. Xing, Zhifu Huang, 2014 .

Optimization of the processing parameters during internal oxidation of Cu–Al alloy powders using an artificial neural network

Ping Liu, Kexing Song, Baohong Tian, 2005 .

Mechanical properties and chemical bonding of M_2B and M_2B_0.75C_0.25 (M = Fe, Cr, W, Mo, Mn) compounds

H. Fu, Yefei Li, J. Xing, 2018, Journal of Materials Research.

The microstructure and tribological property of in-situ Al2O3/Fe–25Al composites in argon atmosphere

Yimin Gao, S. Ma, J. Xing, 2013 .

Effects of chromium addition on fracture toughness and hardness of oriented bulk Fe2B crystals

Biye Wang, J. Xing, Zhifu Huang, 2015 .

Bulk Fe2B crystal fabricated by mechanical ball milling and plasma activated sintering

Biye Wang, Shengqiang Ma, J. Xing, 2014 .

Effect of MoS2 on the tribological properties of in situ Fe3Al-20 wt% Al2O3-4 wt% Cr composites

Yimin Gao, Shengqiang Ma, J. Xing, 2013 .

Tribological properties of in situ Fe3Al-20 wt% Al2O3 composites

Yimin Gao, S. Ma, J. Xing, 2013 .

The mechanical alloying mechanism of various Fe2O3–Al–Fe systems

Yimin Gao, S. Ma, J. Xing, 2013 .

Effects of Mn addition on the two-body abrasive wear behavior of Fe-3.0 wt% B alloy

J. Xing, Zhifu Huang, Yong Wang, 2016 .

Effect of improving Fe2B toughness by chromium addition on the two-body abrasive wear behavior of Fe–3.0 wt% B cast alloy

Liang Sun, J. Xing, Zhifu Huang, 2016 .

Effect of titanium on the as-cast microstructure and impact toughness of hypereutectic high-chromium cast iron

Yimin Gao, J. Xing, Zhifu Huang, 2012 .

First principles study on the electronic structures and stability of Cr7C3 type multi-component carbides

Y. H. Chen, B. Xiao, J. Xing, 2008 .

Impact wear resistance of WC/Hadfield steel composite and its interfacial characteristics

Yimin Gao, Guoshang Zhang, J. Xing, 2006 .

A Quantitative Study of the Synthesis of TiB2 Particles via Salts-Metal Reaction at Different Temperatures

Zhiwei Liu, Qingyou Han, J. Xing, 2016, Metallurgical and Materials Transactions A.

Microstructure and properties of semisolid hypereutectic high chromium cast iron prepared by slope cooling body method

Z. Huang, J. Xing, C. Guo, 2010 .

Effect of Ni Content on Microstructure, Mechanical Properties, and Abrasion Behavior of Fe-B-C Alloy

Qiwei Wang, J. Xing, Hongwan Jiang, 2023, Tribology Transactions.

Microstructure evolution, crystallography, nanomechanical properties and wear-resistance of multi-component M2B in Fe–B alloy

H. Fu, J. Xing, Suocheng Song, 2022, Journal of Materials Research.

Effect of Matrix Microstructure on Abrasive Wear Resistance of Fe–2 wt% B Alloy

J. Xing, Wei Li, Baochao Zheng, 2019, Tribology Transactions.

Investigations on the mechanical properties and three-body wear behavior of pure Fe2B intermetallic with different chromium additions

Yimin Gao, Liang Sun, J. Xing, 2019, Wear.

Effect of normal load on two-body abrasive wear of an Fe-B-Cr-C based alloy with minor Cu and Ni additions

H. Fu, Yimin Gao, J. Xing, 2018, Wear.

Effect of casting thickness on microstructure, mechanical properties and abrasion resistance of Fe-B cast alloy

H. Fu, J. Xing, Q. Zheng, 2018, Tribology International.

Investigations on microstructure, mechanical properties and abrasion resistance of 4wt%Cr-2wt%Mn-2wt%Cu-Fe-B alloy

H. Fu, J. Xing, Q. Zheng, 2018 .

Effect of molybdenum addition on mechanical properties of oriented bulk Fe_2B crystal

K. Jiang, J. Xing, Zhifu Huang, 2017 .

Effect of tungsten addition on the toughness and hardness of Fe2B in wear-resistant Fe–B–C cast alloy

L. Lv, J. Xing, Zhifu Huang, 2013 .

Improving fracture toughness and hardness of Fe2B in high boron white cast iron by chromium addition

Cheng Guo, J. Xing, Zhifu Huang, 2010 .

The elasticity, bond hardness and thermodynamic properties of X2B (X=Cr, Mn, Fe, Co, Ni, Mo, W) investigated by DFT theory

Yonghong Cheng, B. Xiao, R. Zhou, 2010 .

Effect of Hot Forging on Microstructure and Abrasion Resistance of Fe-B Alloy

Yimin Gao, S. Ma, J. Xing, 2013 .

Solidification structure in a cast B-bearing stainless steel

Zhenhua Li, H. Fu, J. Xing, 2007 .

Two-Body Abrasion Behaviors Characterization of White Cast Iron with Various Chromium Concentrations

J. Xing, Wei Li, Baochao Zheng, 2020 .

Isothermal and Cyclic Oxidation Behavior of Fe–B Based Alloys at 927 K

H. Fu, Shengqiang Ma, J. Xing, 2016, Oxidation of Metals.

Stabilization of Nano-Al2O3p/Cu Composite after High Temperature Annealing Treatment

Ping Liu, K. Song, J. Xing, 2005 .

Effect of Silicon Content on Microstructures and Properties of Directionally Solidified Fe-B Alloy

Shengqiang Ma, J. Xing, L. Xu, 2022, Materials.

Microstructure and hardening behavior of Al-modified Fe-1.5 wt%B-0.4 wt%C high-speed steel during heat treatment

H. Fu, Shaoqiang Guo, Ping Lyu, 2017 .

Effect of Heat Treatment on Microstructures and Mechanical Properties of Al-Modified Boron High Speed Steel

S. Ma, Yefei Li, J. Xing, 2017 .

Investigations on Heat Treatment of a High-Speed Steel Roll

H. Fu, J. Xing, Zhiqiang Jiang, 2008, Journal of Materials Engineering and Performance.

Microstructural evolution and mechanical properties of the aluminum-alloyed Fe-1.50 wt%B-0.40 wt%C high-speed steel

H. Fu, Wei Chen, Shaoqiang Guo, 2017 .

Microstructure and crystallography of borides and secondary precipitation in 18 wt.% Cr–4 wt.% Ni–1 wt.% Mo–3.5 wt.% B–0.27 wt.% C steel

H. Fu, Yimin Gao, Shengqiang Ma, 2012 .

Effects of carbon content and sliding ratio on wear behavior of high-vanadium high-speed steel (HVHSS) under high-stress rolling-sliding contact

Shizhong Wei, J. Xing, R. Long, 2014 .

Study on relative wear resistance and wear stability of high-speed steel with high vanadium content

Shizhong Wei, Yongzheng Zhang, J. Xing, 2007 .

Effects of Plastic Deformation and Heat Treatment on Microstructure and Properties of High Boron Cast Steel

Jingbo Yan, Yimin Gao, D. Yi, 2011 .

The development of high speed steel rolls by extrusion casting

H. Fu, Q. Xiao, J. Xing, 2004 .

Three-Body Abrasive Wear Behavior of Cementite with Different Chromium Concentrations

J. Xing, X. Fan, Zhifu Huang, 2016, Tribology Letters.

Microstructure and Properties of Cast B-Bearing High Speed Steel

Y. Lei, H. Fu, Shengqiang Ma, 2013, Journal of Materials Engineering and Performance.

Three-Body Abrasive Behavior of Cementite–Iron Composite with Different Cementite Volume Fractions

J. Xing, X. Fan, Zhifu Huang, 2016, Tribology Letters.

Three-Body Abrasive Wear Behavior of Low Carbon Fe–B Cast Alloy and Its Microstructures Under Different Casting Process

H. Fu, Wei Chen, Jingbo Yan, 2011 .

Effect of TiC Particle Additions on Structure and Properties of Hypereutectic High Chromium Cast Iron

Y. Lei, J. Xing, Xuefeng Li, 2009, Journal of Materials Engineering and Performance.

Effect of boron concentration on microstructures and properties of Fe-B-C alloy steel

H. Fu, J. Xing, Shuli Tang, 2017 .

Microstructure and crystallography of M7C3 carbide in chromium cast iron

Yefei Li, G. Liu, Shengqiang Ma, 2015 .

Effect of Cu on microstructure, crystallography and mechanical properties in Fe-B-C-Cu alloys

J. Xing, Yongxin Jian, Yanliang Yi, 2017 .

Investigations on Microstructures and Two-body Abrasive Wear Behavior of Fe–B Cast Alloy

H. Fu, Rongrong Zhang, Wei Chen, 2012, Tribology Letters.

Effect of Chromium on Microstructure and Oxidation Wear Behavior of High-Boron High-Speed Steel at Elevated Temperatures

Shengqiang Ma, M. Jiao, J. Xing, 2022, Materials.

Microstructure and interface characteristics of Fe–B alloy in liquid 0.25wt.% Al–Zn at various bath temperatures

H. Fu, D. Yi, Yefei Li, 2012 .

Effect of chromium concentration on microstructure and properties of Fe–3.5B alloy

H. Fu, D. Yi, Yefei Li, 2010 .

Research on high-temperature dry sliding friction wear behavior of Ca Ti modified high boron high speed steel

H. Fu, J. Xing, X. Ren, 2019, Tribology International.

Microstructure and Properties of Isothermally Quenched High Boron White Cast Iron

Jingbo Yan, J. J. Zhang, J. Xing, 2010 .

Effect of Ti addition on morphology and size of primary M7C3 type carbide in hypereutectic high chromium cast iron

Z. Huang, J. Xing, X. Zhi, 2011 .

Interfacial morphology and corrosion-wear behavior of cast Fe-3.5 wt.% B steel in liquid zinc

H. Fu, Shengqiang Ma, J. Xing, 2018 .

Investigations on Microstructures and Three-Body Abrasive Wear Behaviors of Fe–B Cast Alloy Containing Cerium

H. Fu, D. Yi, Zhiyun Zhang, 2015, Tribology Letters.

Effect of Titanium and Nitrogen Additions on the Microstructures and Three-Body Abrasive Wear Behaviors of Fe–B Cast Alloys

H. Fu, D. Yi, Zhiyun Zhang, 2014, Tribology Letters.

Effect of rare earth–aluminium additions on the microstructure of a semisolid low carbon Fe–B cast alloy

D. Yi, Z. X. Liu, J. Xing, 2011 .

Effect of erosion speed on the interaction between erosion and corrosion of the Fe–3.5 wt% B alloy in a flowing zinc bath

Shengqiang Ma, J. Xing, Yaping Bai, 2015 .

Effects of Erosion Angle on Erosion Properties of Fe-B Alloy in Flowing Liquid Zinc

H. Fu, Shengqiang Ma, Yiran Wang, 2015, Metallurgical and Materials Transactions A.

Microstructure and corrosion behavior of cast Fe–B alloys dipped into liquid zinc bath

H. Fu, D. Yi, Shengqiang Ma, 2010 .

Effects of boron concentration on the corrosion resistance of Fe–B alloys immersed in 460 °C molten zinc bath

H. Fu, D. Yi, Yefei Li, 2010 .

Manufacture and Microstructures of Fe-Cr-C Hypereutectic In Situ Composites

J. Xing, X. Cheng, Xiao Wu, 2007 .

Interfacial Characteristics and Wear Resistance of WCp/White-Cast-Iron Composites

J. Xing, G. Zhang, S. Wei, 2007 .

A Study of Modification of M2 Cast High Speed Steel

J. Xing, H. Fu, 2004 .

Effects of Forging and Heat Treatment on Microstructure and Properties of High Boron White Cast Iron

Yimin Gao, Yefei Li, J. J. Zhang, 2010 .

Investigations on the Cast Boron Steel Guide Roller and Its Application in Steel Wire-Rod Mill

J. Xing, Ding-mei Fu, H. Fu, 2008 .

Investigation of erosion properties of directionally solidified Fe-B alloy in various velocities liquid zinc

Shengqiang Ma, J. Xing, Guangzhu Liu, 2017 .

Investigation on two-body abrasive wear behavior and mechanism of Fe–3.0 wt% B cast alloy with different chromium content

Liang Sun, J. Xing, Zhifu Huang, 2016 .

Three-body abrasive wear behaviors and mechanism analysis of Fe–B–C cast alloys with various Mn contents

J. Xing, Haiyue Ning, Zhifu Huang, 2021 .

Effects of chromium additions on the three-body abrasive wear behavior of Fe-3.0 wt% B alloy

J. Xing, Zhifu Huang, Yongxin Jian, 2017 .

Microstructure, hardness and slurry erosion-wear behaviors of high-speed laser cladding Stellite 6 coatings prepared by the inside-beam powder feeding method

Guosheng Huang, Ziyi Yang, J. Xing, 2022, Journal of Materials Research and Technology.

Effect of interaction between cementite and pearlite on two-body abrasive wear behaviors in white cast iron

J. Xing, Wei Li, X. Tu, 2020, Friction.

Quantitative characterization of the wear interactions between the boride and metallic matrix in Fe-3.0 wt % B duplex alloy

Tonghai Wu, J. Xing, Zhifu Huang, 2019, Wear.

Effects of Chromium Addition on Microstructure and Abrasion Resistance of Fe–B Cast Alloy

Jingbo Yan, Yimin Gao, D. Yi, 2011 .

Effect of homogenization temperature on microstructure and mechanical properties of low-carbon high-boron cast steel

Y. Lei, H. Fu, Xuding Song, 2009 .

Investigation of quenching effect on mechanical property and abrasive wear behaviour of high boron cast steel

H. Fu, J. Xing, Z. W. Wu, 2007 .

Microstructure and properties of a nano-ZrO2-reinforced AlSi10Mg matrix composite prepared by selective laser melting

B. Lu, Pei Wei, Zhen Chen, 2022, Materials Science and Engineering: A.

Tomographical Study of the Effect of Graphite on Properties of Cast Iron

Yefei Li, J. Xing, D. Tao, 2018 .

Effect of carbon equivalent on thermal and mechanical properties of compacted graphite cast iron

L. Wang, Yefei Li, J. Xing, 2016 .

A study of segregation mechanism in centrifugal cast high speed steel rolls

H. Fu, Q. Xiao, J. Xing, 2008 .

Mechanical properties and electronic structures of M23C6 (M = Fe, Cr, Mn)-type multicomponent carbides

Ye-hua Jiang, R. Zhou, J. Xing, 2015 .

First principles study on the elastic properties and electronic structures of (Fe, Cr)3C

Y. H. Chen, B. Xiao, R. Zhou, 2009 .

Wear reduction mechanism of graphite and MoS2 in epoxy composites

L. Fang, Yimin Gao, J. Xing, 2004 .

Microstructural characterization and properties of Al/Cu/steel diffusion bonded joints

H. Fu, Yimin Gao, B. Bai, 2010 .

The pressure dependence of physical properties of (W2/3Ti1/3)3AlC2 and its counterpart W3AlC2 by first-principles calculations

Yefei Li, Liang Sun, J. Xing, 2017 .

Structural stability, mechanical properties, electronic structures and thermal properties of XS (X = Ti, V, Cr, Mn, Fe, Co, Ni) binary compounds

H. Fu, Yefei Li, Liang Sun, 2017 .

Metastable bcc-Cu precipitation behavior and its effect on microstructure and strengthening of as-cast Fe–B alloy containing 3 wt% copper content

D. Yi, J. Xing, X. Ren, 2018, Materials Research Express.

Investigations of Solidification Structures of High Carbon Alloy Cast Steel Containing RE-V-Ti

H. Fu, J. Xing, Y. Qu, 2009, Journal of materials engineering and performance (Print).

Effects of rare earth and tantalum on graphite-like carbon coatings

J. Xing, Peng Chen, Zuoping Wang, 2011 .

Multiphase interface structure induced erosion resistance of directional solidified Fe-B alloy in flow liquid zinc

Yafei Wang, Ping Lyu, G. Liu, 2018 .

A Study of Boron-Bearing Wear-Resistant Alloy Steel Liner

H. Fu, J. Xing, D. Zou, 2008 .

A Fundamental Research of Electromagnetic Centrifugal Cast High Speed Steel (HSS) Roll

J. Xing, Han-guang Fu, 2007 .

A Study of Microstructure and Performance of Tempered Fe‐V‐W‐Mo Alloy

H. Fu, Q. Xiao, J. Xing, 2006 .

Computer simulation of two-body abrasion processes

Q. Xue, L. Fang, J. Xing, 2001 .