T. Gmür

发表

Vibration-based characterization of impact induced delamination in composite plates using embedded FBG sensors and numerical modelling

Joël Cugnoni, Thomas Gmür, John Botsis, 2011 .

Low energy impact damage monitoring of composites using dynamic strain signals from FBG sensors - Part I: Impact detection and localization

Joël Cugnoni, Thomas Gmür, John Botsis, 2012 .

Delamination detection and characterisation of bridging tractions using long FBG optical sensors

Joël Cugnoni, Thomas Gmür, John Botsis, 2007 .

An efficient method for fiber bridging traction identification based on the R-curve: Formulation and experimental validation

J. Botsis, J. Cugnoni, T. Gmür, 2017 .

Characterisation of bridging tractions in mode-I delamination using distributed strain measurements and numerical modelling

J. Botsis, J. Cugnoni, T. Gmür, 2008 .

Bridging tractions in mode I delamination: Measurements and simulations

J. Botsis, T. Gmür, L. Humbert, 2008 .

Residual strain development in an AS4/PPS thermoplastic composite measured using fibre Bragg grating sensors

Thomas Gmür, John Botsis, J. Botsis, 2006 .

Deformation characteristics of composite laminates—part II: an experimental/numerical study on equivalent single-layer theories

F. Bosia, J. Botsis, T. Gmür, 2002 .

Multi-factorial models of a carbon fibre/epoxy composite subjected to accelerated environmental ageing

J. Cugnoni, T. Gmür, Enrique Guzmán, 2014 .

Experimental study on the effects of the boundary conditions on the deformations of composite plates

J. Botsis, T. Gmür, M. Mostafa, 2006 .

Modal validation of a set of C0-compatible composite shell finite elements

J. Cugnoni, T. Gmür, A. Schorderet, 2004 .

Finite element analysis of microscopic biological structures

G. Dietler, S. Kasas, T. Gmür, 2008 .

Ply thickness dependence of the intralaminar fracture in thin-ply carbon-epoxy laminates

J. Botsis, J. Cugnoni, T. Gmür, 2018, Composites Part A: Applied Science and Manufacturing.

Mode I interlaminar fracture of carbon epoxy laminates: Effects of ply thickness

J. Botsis, J. Cugnoni, T. Gmür, 2016 .

Modal numerical-experimental identification method for characterising the elastic and damping properties in sandwich structures with a relatively stiff core

M. Schwaar, J. Frieden, T. Gmür, 2012 .

Through-the-thickness distribution of strains in laminated composite plates subjected to bending

F. Bosia, M. Facchini, J. Botsis, 2004 .

Through-the-Thickness Deformation of Composite Laminates Subjected to Bending

F. Bosia, J. Botsis, T. Gmür, 2003 .

Experimental Analysis of Composite Laminates Subjected to Bending

F. Bosia, M. Facchini, J. Botsis, 2000 .

Acoustic emission study and strength analysis of crimped steel-composite joints under traction

J. Botsis, K. Papailiou, T. Gmür, 2006 .

Survivability of integrated PVDF film sensors to accelerated ageing conditions in aeronautical/aerospace structures

Enrique Guzmán, Joël Cugnoni, Thomas Gmür, 2013 .

Finite-Element Analysis of Microbiological Structures

Giovanni Dietler, Thomas Gmür, Sandor Kasas, 2017 .

Numerical-experimental identification of the elastic and damping properties in composite plates

Joël Cugnoni, Thomas Gmür, Alain Schorderet, 2009 .

Inverse method based on modal analysis for characterizing the constitutive properties of thick composite plates

Joël Cugnoni, Thomas Gmür, Alain Schorderet, 2007 .

Improved modal characterization of the constitutive parameters in multilayered plates

Joël Cugnoni, Thomas Gmür, Alain Schorderet, 2007 .

Monitoring of composite structures using a network of integrated PVDF film transducers

Joël Cugnoni, Thomas Gmür, J. Cugnoni, 2015 .

The solution of large undamped gyroscopic eigensystems by a subspace iteration method

J. Rodrigues, T. Gmür, 1989 .

Optical Fibre Bragg Grating Sensors in Experimental Mechanics of Composite Laminated Plates

F. Bosia, M. Facchini, J. Botsis, 2002 .

Identification of the elastic and damping properties in sandwich structures with a low core-to-skin stiffness ratio

Joël Cugnoni, Thomas Gmür, Alain Schorderet, 2011 .

A PSDT shell finite element formulation including structural damping

Joël Cugnoni, Thomas Gmür, Alain Schorderet, 2010 .

High-speed internal strain measurements in composite structures under dynamic load using embedded FBG sensors

Dragan Coric, Joël Cugnoni, Thomas Gmür, 2010 .

A subspace iteration algorithm for the eigensolution of large structures subject to non-classical viscous damping

Thomas Gmür, Alain Schorderet, T. Gmür, 2000 .

Stress and damage analysis of composite–aluminium joints used in electrical insulators subject to traction and bending

J. Botsis, K. Papailiou, P. Bonhôte, 2004 .

Identification by modal analysis of composite structures modelled with FSDT and HSDT laminated shell finite elements

Joël Cugnoni, Alain Schorderet, J. Cugnoni, 2004 .

Stress and failure analysis of crimped metal-composite joints used in electrical insulators subjected to bending

J. Botsis, K. Papailiou, T. Gmür, 2009 .

Three‐dimensional solid‐to‐beam transition elements for structural dynamics analysis

Thomas Gmür, Randy H. Kauten, T. Gmür, 1993 .