O. Mohamed

发表

Investigation of dynamic elastic deformation of parts processed by fused deposition modeling additive manufacturing

Syed H. Masood, Jahar Lal Bhowmik, Omar Ahmed Mohamed, 2016 .

Effect of Process Parameters on Dynamic Mechanical Performance of FDM PC/ABS Printed Parts Through Design of Experiment

Syed H. Masood, Jahar Lal Bhowmik, Omar Ahmed Mohamed, 2016, Journal of Materials Engineering and Performance.

Optimisation of Dynamic Mechanical Thermal Properties of PC–ABS Parts Manufactured by FDM Process Using IV Optimal Design

S. Masood, O. Mohamed, J. Bhowmik, 2014 .

Analysis of wear behavior of additively manufactured PC-ABS parts

Syed H. Masood, Jahar Lal Bhowmik, Omar Ahmed Mohamed, 2018, Materials Letters.

Experimental investigation of creep deformation of part processed by fused deposition modeling using definitive screening design

S. Masood, O. Mohamed, J. Bhowmik, 2017 .

Comment about lack of sufficient data on “A prediction model for finding the optimal laser parameters in additive manufacturing of NiTi shape memory alloy” by Mehrpouya et al. [The International Journal of Advanced Manufacturing Technology 105.11 (2019): 4691–4699.]

O. Mohamed, Wei-xing Xu, 2021, Progress in Additive Manufacturing.

Influence of processing parameters on creep and recovery behavior of FDM manufactured part using definitive screening design and ANN

Syed H. Masood, Jahar Lal Bhowmik, Omar Ahmed Mohamed, 2017 .

Experimental investigation of time-dependent mechanical properties of PC-ABS prototypes processed by FDM additive manufacturing process

S. Masood, O. Mohamed, J. Bhowmik, 2017 .

Investigation on the tribological behavior and wear mechanism of parts processed by fused deposition additive manufacturing process

S. Masood, O. Mohamed, J. Bhowmik, 2017 .

Experimental investigation of the influence of fabrication conditions on dynamic viscoelastic properties of PC-ABS processed parts by FDM process

S. Masood, O. Mohamed, J. Bhowmik, 2016 .

Statistical analysis of porosity of 17-4PH alloy processed by selective laser melting

S. Palanisamy, D. Ruan, P. Ponnusamy, 2017 .

Optimization of fused deposition modeling process parameters: a review of current research and future prospects

Omar Ahmed Mohamed, Syed H. Masood, Jahar Lal Bhowmik, 2015, Advances in Manufacturing.

Superelastic Behavior of Additively Manufactured Nylon-12 Lattice Structures

O. Mohamed, Udesh M. H. U. Kankanamge, Wei-jia Xu, 2021, Journal of Materials Engineering and Performance.

Modeling, analysis, and optimization of dimensional accuracy of FDM-fabricated parts using definitive screening design and deep learning feedforward artificial neural network

S. Masood, O. Mohamed, J. Bhowmik, 2021, Advances in Manufacturing.

Characterization and dynamic mechanical analysis of PC-ABS material processed by fused deposition modelling: An investigation through I-optimal response surface methodology

Omar Ahmed Mohamed, Syed H. Masood, Jahar Lal Bhowmik, 2017 .

Experimental Investigations of Process Parameters Influence on Rheological Behavior and Dynamic Mechanical Properties of FDM Manufactured Parts

Syed H. Masood, Jahar Lal Bhowmik, Omar Ahmed Mohamed, 2016 .

Analytical Modelling and Optimization of the Temperature-Dependent Dynamic Mechanical Properties of Fused Deposition Fabricated Parts Made of PC-ABS

Omar Ahmed Mohamed, Jahar Lal Bhowmik, Syed Hasan Masood, 2016, Materials.

Buckling Analysis of Hybrid Laminated Composite Beam Analytically and Numerically

O. Mohamed, 2019, AL-Rafdain Engineering Journal (AREJ).

A parametric investigation of the friction performance of PC-ABS parts processed by FDM additive manufacturing process

S. Masood, O. Mohamed, J. Bhowmik, 2017 .

Optimization of fused deposition modeling process parameters for dimensional accuracy using I-optimality criterion

Omar Ahmed Mohamed, Syed H. Masood, Jahar Lal Bhowmik, 2016 .

Nickel-titanium shape memory alloys made by selective laser melting: a review on process optimisation

S. Masood, O. Mohamed, Wei Xu, 2022, Advances in Manufacturing.

Effects of stress triaxiality and strain rate on the fracture of a CuCrZr alloy

Guiyi Wu, T. Sui, Yiqiang Wang, 2021, Journal of Nuclear Materials.

Mathematical modeling and FDM process parameters optimization using response surface methodology based on Q-optimal design

Omar Ahmed Mohamed, Syed H. Masood, Jahar Lal Bhowmik, 2016 .

Investigation of morphological, structural and electronic transformation of PVDF and ZnO/rGO/PVDF hybrid membranes

M. Ibrahim, T. Abdallah, O. Mohamed, 2023, Optical and Quantum Electronics.

Comment about lack of sufficient data on “A prediction model for finding the optimal laser parameters in additive manufacturing of NiTi shape memory alloy” by Mehrpouya et al. [The International Journal of Advanced Manufacturing Technology 105.11 (2019): 4691–4699.]

O. Mohamed, Wei-xing Xu, 2021, Progress in Additive Manufacturing.

Experimental investigation on flexural properties of FDM processed Nylon 12 parts using RSM

S. Masood, O. Mohamed, Salam Nori Kamoona, 2018, IOP Conference Series: Materials Science and Engineering.

Experimental Study of the Wear Performance of Fused Deposition Modeling Printed Polycarbonate-Acrylonitrile Butadiene Styrene Parts Using Definitive Screening Design and Machine Learning-Genetic Algorithm

S. Masood, O. Mohamed, J. Bhowmik, 2021, Journal of Materials Engineering and Performance.

Parametric analysis of the build cost for FDM additive processed parts using response surface methodology

Omar Ahmed Mohamed, Syed H. Masood, Jahar Lal Bhowmik, 2016 .

A brief overview of solar and wind energy in Libya: Current trends and the future development

S. Masood, O. Mohamed, 2018, IOP Conference Series: Materials Science and Engineering.

An investigation on impact resistance of FDM processed Nylon-12 parts using response surface methodology

S. Masood, O. Mohamed, Salam Nori Kamoona, 2017 .

Parametric analysis of FDM process parameters’ effect on the surface roughness of PC-ABS polymeric material

S. Masood, D. Ruan, O. Mohamed, 2023, THE 6TH INTERNATIONAL CONFERENCE ON ENERGY, ENVIRONMENT, EPIDEMIOLOGY AND INFORMATION SYSTEM (ICENIS) 2021: Topic of Energy, Environment, Epidemiology, and Information System.

Investigation of the influence of FDM operating parameters on dynamic force response using IV-optimal design and principal component analysis

Omar Ahmed Mohamed, Syed H. Masood, Jahar Lal Bhowmik, 2017 .

Analytical Modelling and Optimization of the Temperature-Dependent Dynamic Mechanical Properties of Fused Deposition Fabricated Parts Made of PC-ABS

S. Masood, O. Mohamed, J. Bhowmik, 2016, Materials.