W. Symens

发表

Characterization of frictional hysteresis in ball-bearing guideways

Farid Al-Bender, Wim Symens, F. Al-Bender, 2005 .

Gain-scheduling control for mechatronic systems with position dependent dynamics

J. Swevers, H. Brussel, W. Symens, 2006 .

Design and construction of a linear piezo-electrically driven forced travelling wave motor

Dominiek Reynaerts, Hendrik Van Brussel, Mark Versteyhe, 2000 .

Active structural acoustic control of rotating machinery using an active bearing

J. Swevers, G. Pinte, P. Sas, 2008 .

Robust and two-level (nonlinear) predictive control of switched dynamical systems with unknown references for optimal wet-clutch engagement

Abhishek Dutta, Robin De Keyser, Clara M. Ionescu, 2014, J. Syst. Control. Eng..

Robust predictive control design for optimal wet-clutch engagement

Abhishek Dutta, Robin De Keyser, Clara M. Ionescu, 2012, 2012 American Control Conference (ACC).

A piezo-based bearing for the active structural acoustic control of rotating machinery

Jan Swevers, Steven Devos, Paul Sas, 2010 .

Gain-scheduling control of machine tools with varying structural flexibility

Jan Swevers, Hendrik Van Brussel, Wim Symens, 2004 .

Pole-placement vs. loop-shaping design for gain-scheduling control of machine tools with position dependent dynamics

H. Van Brussel, W. Symens, J. Swevers, 2003, 2003 European Control Conference (ECC).

Positioning controller for mechanical systems with a mini harmonic drive servo actuator

H. Van Brussel, T. Tjahjowidodo, F. Al-Bender, 2007, 2007 IEEE/ASME international conference on advanced intelligent mechatronics.

Friction characterization and compensation in electro-mechanical systems

Hendrik Van Brussel, Tegoeh Tjahjowidodo, Farid Al-Bender, 2007 .

Theoretical analysis of the dynamic behavior of hysteresis elements in mechanical systems

Jan Swevers, Farid Al-Bender, H. Van Brussel, 2004 .

Dynamic characterization of hysteresis elements in mechanical systems

H. Van Brussel, F. Al-Bender, W. Symens, 2002, Proceedings of the 2002 American Control Conference (IEEE Cat. No.CH37301).

Identification of Interpolating Affine LPV Models for Mechatronic Systems with one Varying Parameter

Jan Swevers, Hendrik Van Brussel, Bart Paijmans, 2008, Eur. J. Control.

Fine Tuning of a Wet Clutch Engagement by Means of a Genetic Algorithm

Abhishek Dutta, Robin De Keyser, Clara M. Ionescu, 2012, AIAI.

Gain-scheduling control of machine tools with varying structural flexibilities

Jan Swevers, Hendrik Van Brussel, Wim Symens, 2003 .

Iso efficiency contours as a concept to characterize variable speed drive efficiency

J. Driesen, K. Stockman, W. Symens, 2010, The XIX International Conference on Electrical Machines - ICEM 2010.

Improving wet clutch engagement with reinforcement learning

Peter Vrancx, Ann Nowé, Gregory Pinte, 2012, The 2012 International Joint Conference on Neural Networks (IJCNN).

A gain-scheduling-control technique for mechatronic systems with position-dependent dynamics

H. Van Brussel, W. Symens, J. Swevers, 2006, 2006 American Control Conference.

Switched Predictive Control Design for Optimal Wet-clutch Engagement

Abhishek Dutta, Robin De Keyser, Clara M. Ionescu, 2012 .

A two-level Iterative Learning Control scheme for the engagement of wet clutches

Jan Swevers, Bruno Depraetere, Gregory Pinte, 2011 .

Active Structural Acoustic Source Control of Rotating Machinery Using Piezo Bearings

Jan Swevers, Paul Sas, Gregory Pinte, 2007 .

Parameter Sensitivity and Measurement Uncertainty Propagation in Torque-Estimation Algorithms for Induction Machines

Johan Driesen, Wim Deprez, Wim Symens, 2008, IEEE Transactions on Instrumentation and Measurement.

Parameter Sensitivity and Measurement Error Propagation in Torque Estimation Algorithms for Induction Machines

J. Driesen, C. Bastiaensen, W. Deprez, 2006, 2006 IEEE Instrumentation and Measurement Technology Conference Proceedings.

Position and Velocity Predictions of the Piston in a Wet Clutch System during Engagement by Using a Neural Network Modeling

Abhishek Dutta, Robin De Keyser, Clara M. Ionescu, 2012, AIAI.

Calculating energy consumption of motor systems with varying load using iso efficiency contours

Kurt Stockman, Wim Symens, Wim Deprez, 2010, The XIX International Conference on Electrical Machines - ICEM 2010.