I. Tsukrov

发表

Modeling of dynamic behavior of a single-point moored submersible fish cage under currents

Barbaros Celikkol, Igor Tsukrov, M. R. Swift, 2010 .

Effective elastic properties of solids with defects of irregular shapes

Igor Tsukrov, Jindrich Novak, I. Tsukrov, 2002 .

Identification of process-induced residual stresses in 3D woven carbon/epoxy composites by combination of FEA and blind hole drilling

T. Gross, I. Tsukrov, Kostiantyn Vasylevskyi, 2020 .

Elastic deformation of composite cylinders with cylindrically orthotropic layers

Igor Tsukrov, Borys Drach, I. Tsukrov, 2010 .

Basic equations of elasticity

M. Kachanov, I. Tsukrov, B. Shafiro, 2003 .

Point forces and systems of point forces in the three-dimensional space and half-space

M. Kachanov, I. Tsukrov, B. Shafiro, 2003 .

Basic stress intensity factors (SIFs) and stress concentrations (2-D configurations)

M. Kachanov, I. Tsukrov, B. Shafiro, 2003 .

Selected two-dimensional problems

M. Kachanov, I. Tsukrov, B. Shafiro, 2003 .

Three-dimensional crack problems for the isotropic or transversely isotropic infinite solid

M. Kachanov, I. Tsukrov, B. Shafiro, 2003 .

Eshelby’s problem and related results

M. Kachanov, I. Tsukrov, B. Shafiro, 2003 .

Curing cycle modification for RTM6 to reduce hydrostatic residual tensile stress in 3D woven composites

H. Bayraktar, T. Gross, I. Tsukrov, 2016 .

Scanning probe microscopy generated out-of-plane deformation maps exhibiting heterogeneous nanoscale deformation resulting from thermal cycling of Cu-polyimide damascene interconnects

T. Gross, I. Tsukrov, N. Kamsah, 2001 .

Comparison of stress-based failure criteria for prediction of curing induced damage in 3D woven composites

T. Gross, I. Tsukrov, A. Drach, 2018 .

Material modeling of the CVI-infiltrated carbon felt II. Statistical study of the microstructure, numerical analysis and experimental validation

T. Beck, R. Piat, E. Schnack, 2006 .

Shear enhancement of mechanical and microstructural properties of synthetic graphite and ultra‐high molecular weight polyethylene carbon composites

D. V. Van Citters, I. Tsukrov, Hannah J. Favreau, 2022, Journal of Applied Polymer Science.

Determination of hydrodynamic coefficients of the floating cage collar with forced oscillation experiments

Hongde Qin, I. Tsukrov, Zhijing Xu, 2018, Ocean Engineering.

SeaweedPaddock: Initial Modeling and Design for a Sargassum Ranch

M. R. Swift, Anthony T. Jones, Kelly L. Lucas, 2018, OCEANS 2018 MTS/IEEE Charleston.

Ocean Forests: Breakthrough Yields for Macroalgae

M. R. Swift, Kelly L. Lucas, S. DiMarco, 2018, OCEANS 2018 MTS/IEEE Charleston.

PREDICTING CURE-INDUCED MICROCRACKING IN 3 D WOVEN COMPOSITES WITH REALISTIC SIMULATION TECHNOLOGY

H. Bayraktar, T. Gross, I. Tsukrov, 2012 .

Development of Realistic Simulation Techniques to Predict Cure-Induced Microcracking in 3D Woven Composites

H. Bayraktar, T. Gross, I. Tsukrov, 2011 .

Measuring Failure Stress of RTM6 Epoxy Resin under Purely Hydrostatic Tensile Stress using Constrained Tube Method

H. Bayraktar, T. Gross, I. Tsukrov, 2016, Experimental Techniques.

Applicability of two-step homogenization to high-crimp woven composites

I. Tsukrov, Kostiantyn Vasylevskyi, B. Drach, 2019, Composite Structures.

Finite Element Predictions of the Effect of Diffusion-Accommodated Interfacial Sliding on Thermal Stresses in Cu/Polymer Dielectric and Cu/Oxide Dielectric Single Level Damascene Interconnect Structures

T. Gross, I. Tsukrov, N. Kamsah, 2002 .

Characterization and statistical modeling of irregular porosity in carbon/carbon composites based on X‐ray microtomography data

I. Tsukrov, A. Drach, B. Drach, 2013 .

Stochastic approach to micromechanical modeling of porous solids

I. Tsukrov, A. Drach, B. Drach, 2013 .

Material modeling of the CVI-infiltrated carbon felt I: Basic formulae, theory and numerical experiments

R. Piat, E. Schnack, M. Hoffmann, 2006 .

Material properties of anisotropic materials with pores

R. Piat, I. Tsukrov, B. Drach, 2011 .

Micromechanical Modeling of Heterogeneous Materials with Irregularly Shaped Pores

I. Tsukrov, B. Drach, 2011 .

EFFECTIVE ELASTIC PARAMETERS OF CARBON/CARBON COMPOSITES WITH NON-ELLIPSOIDAL PORES

R. Piat, I. Tsukrov, B. Drach, 2011 .

Effective Moduli of Solids With Cavities of Various Shapes

M. Kachanov, I. Tsukrov, B. Shafiro, 1994 .

Effective Elastic Properties Of RandomComposites: Approximate Modeling Schemes

I. Tsukrov, O. Eroshkin, 2004 .

elastic fibers of unidirectional composites with non-circular Micromechanicalmodeling of transverse moduli

I. Tsukrov, L. Novak, 2002 .

Prediction of the effective elastic moduli of materials with irregularly-shaped pores based on the pore projected areas

I. Tsukrov, A. Drach, B. Drach, 2014 .

Solids with holes of irregular shapes: Effective moduli and anisotropy

M. Kachanov, I. Tsukrov, 1993 .

Methodology for multidimensional approximation of current velocity fields around offshore aquaculture installations

D. Fredriksson, I. Tsukrov, A. Drach, 2022, Aquacultural Engineering.

Finite Element Modeling of Diffusional Creep with Explicit Consideration of Enhanced Vacancy Diffusivity in a Finite Region Adjacent to the Grain Interface

T. Gross, I. Tsukrov, Vasyl M Grychanyuk, 2008 .

On the ability of nanoindentation to measure anisotropic elastic constants of pyrolytic carbon

R. Piat, T. Gross, B. Reznik, 2013 .

Evaluation of Process-Induced Residual Stresses in Orthogonal 3D Woven Composites via Nonlinear Finite Element Modeling Validated by Hole Drilling Experiments

T. Gross, I. Tsukrov, Kostiantyn Vasylevskyi, 2022, Composite Structures.

Field studies of corrosion behaviour of copper alloys in natural seawater

J. Decew, I. Tsukrov, A. Drach, 2013 .

Microstructure characterization of CVI-densified carbon/carbon composites with various fiber distributions

O. Deutschmann, A. Wanner, G. Stasiuk, 2012 .

Elastic properties of pyrolytic carbon with axisymmetric textures

R. Piat, T. Langhoff, B. Reznik, 2010 .

Micromechanical Modeling of Porous Carbon/Carbon Composites

Igor Tsukrov, Eckart Schnack, Jindrich Novak, 2005 .

Influence of Pores on Effective Elastic Properties of Unidirectional Carbon/Carbon Composites

R. Piat, E. Schnack, I. Tsukrov, 2003 .

On contribution of pores into the effective elastic properties of carbon/carbon composites

R. Piat, E. Schnack, I. Tsukrov, 2002 .

Predicting the overall response of an orthogonal 3D woven composite using simulated and tomography-derived geometry

I. Tsukrov, Kostiantyn Vasylevskyi, B. Drach, 2020 .

Unique nanoindentation damage for highly textured pyrolytic carbon

T. Gross, B. Reznik, I. Tsukrov, 2013 .

ON THE ABILITY OF SHARP INDENTERS TO MEASURE ELASTIC ANISOTROPY IN PYROLYTIC CARBON

T. Gross, I. Tsukrov, N. Timoshchuk, 2011 .

Role of grain structure, grain boundaries, crystallographic texture, precipitates, and porosity on fatigue behavior of Inconel 718 at room and elevated temperatures

Nicholas C. Ferreri, M. Knezevic, S. Ghorbanpour, 2019, Materials Characterization.

Corrosion Rates and Changes in Mechanical Properties of Copper Alloys due to Seawater Exposure

T. Gross, I. Tsukrov, A. Drach, 2012 .

The design and analysis of a four-cage grid mooring for open ocean aquaculture

David W. Fredriksson, M. Robinson Swift, Barbaros Celikkol, 2004 .

Low cycle fatigue behavior of direct metal laser sintered Inconel alloy 718

M. Knezevic, I. Tsukrov, Jonathan Bicknell, 2016 .

Microstructure and mechanical behavior of direct metal laser sintered Inconel alloy 718

M. Knezevic, N. Cordes, B. Patterson, 2016 .

Handbook of elasticity solutions

Igor Tsukrov, Mark Kachanov, M. Kachanov, 2003 .

Mechanical model of suture joints with fibrous connective layer

I. Tsukrov, Yaning Li, Lei Liu, 2017 .

Effective stiffness and thermal expansion coefficients of unidirectional composites with fibers surrounded by cylindrically orthotropic matrix layers

T. Gross, I. Tsukrov, B. Drach, 2012 .

Analysis Of Diffusional Stress Relaxation InSubmicron Cu Interconnect Structures UsingThe Model With Enhanced Vacancy DiffusivityIn Grain Boundary Region

T. Gross, I. Tsukrov, W. M. Grich, 2006 .

Numerical Modeling of Grain Boundary Effects in the Diffusional Creep of Copper Interconnect Lines

T. Gross, I. Tsukrov, Vasyl M Grychanyuk, 2004 .

INFLUENCE OF ANISOTROPY OF PYROLYTIC CARBON ON EFFECTIVE PROPERTIES OF CARBON / CARBON COMPOSITES

T. Gross, I. Tsukrov, B. Drach, 2009 .

On micromechanical modeling of orthotropic solids with parallel cracks

I. Tsukrov, Kostiantyn Vasylevskyi, B. Drach, 2018, International Journal of Solids and Structures.

Effective elastic properties of solids with two-dimensional inclusions of irregular shapes

I. Tsukrov, J. Novák, 2004 .

Numerical modeling of carbon/carbon composites with nanotextured matrix and 3D pores of irregular shapes

R. Piat, T. Böhlke, T. Gross, 2011 .

Micromechanical Modeling of Chemical Vapor Inltrated Carbon/Carbon Composites

I. Tsukrov, B. Drach, 2010 .

Comparison of full field and single pore approaches to homogenization of linearly elastic materials with pores of regular and irregular shapes

I. Tsukrov, B. Drach, A. Trofimov, 2016 .

Comparison of Full Field and Single Inclusion Approaches to Homogenization of Composites with Non-Ellipsoidal Pores

I. Tsukrov, B. Drach, A. Trofimov, 2014 .

On micromechanical modeling of particulate composites with inclusions of various shapes

I. Tsukrov, O. Eroshkin, 2005 .

Effective Elastic Properties of Solids with Randomly Located Defects

M. Kachanov, I. Tsukrov, B. Shafiro, 1994 .

Materials with fluid-saturated cracks and cavities: Fluid pressure polarization and effective elastic response

M. Kachanov, I. Tsukrov, B. Shafiro, 1995 .

Processing of fiber architecture data for finite element modeling of 3D woven composites

Andrew Drach, Igor Tsukrov, Borys Drach, 2014, Adv. Eng. Softw..

Finite element modeling of net panels using a consistent net element

David W. Fredriksson, M. Robinson Swift, Barbaros Celikkol, 2003 .

Elastic Moduli of Composites with Rigid Elliptical Inclusions

I. Tsukrov, 2000 .

Effect of Element Types on Failure Prediction Using a Stress-Based Forming Limit Curve

B. Kinsey, I. Tsukrov, R. Hasan, 2011 .

Stress concentrations and microfracturing patterns in a brittle-elastic solid with interacting pores of diverse shapes

M. Kachanov, I. Tsukrov, 1997 .

Finite Element Modeling to Predict Cure-Induced Microcracking in Three-Dimensional Woven Composites

Igor Tsukrov, Lars Martinsson, Jon Goering, 2011 .

Numerical and Experimental Investigations of Key Assumptions in Analytical Failure Models for Sheet Metal Forming

Brad L. Kinsey, Igor Tsukrov, Tugce Kasikci, 2014 .

Development of a porous media model with application to flow through and around a net panel

David W. Fredriksson, Kenneth C. Baldwin, M. Robinson Swift, 2010 .

Development of structural modeling techniques for evaluating HDPE plastic net pens used in marine aquaculture

Igor Tsukrov, Judson DeCew, David W. Fredriksson, 2007 .

Stress–strain relations in elastoplastic solids with Dugdale-type cracks

I. Tsukrov, Yu. A. Chernyakov, Vasyl M Grychanyuk, 2003 .

Elastoplastic behavior of two-dimensional solids with rectilinear cracks under mixed-mode loading

I. Tsukrov, Vasyl M Grychanyuk, 2002 .

Effective moduli of an anisotropic material with elliptical holes of arbitrary orientational distribution

Igor Tsukrov, Mark Kachanov, M. Kachanov, 2000 .

Anisotropic Material with Arbitrarily Oriented Cracks and Elliptical Holes: Effective Elastic Moduli

Igor Tsukrov, Mark Kachanov, M. Kachanov, 1998 .

Effective Elastic Moduli of Materials with Irregularly Shaped Pores Characterized by Micro-Computed Tomography

A. Wanner, R. Piat, T. Böhlke, 2010 .

Elastoplastic behavior of two-dimensional solids with mixed-mode cracks

I. Tsukrov, Vasyl M Grychanyuk, 2003 .

Application of numerical conformal mapping to micromechanical modeling of elastic solids with holes of irregular shapes

I. Tsukrov, J. Novák, 2001 .

Effect of Unit Cell Geometry and Fiber Waviness on the Overall Mechanical Response of 3D Woven Composites

I. Tsukrov, Kostiantyn Vasylevskyi, B. Drach, 2019, American Society for Composites 2019.

Mechanics of the right whale mandible : full scale testing and finite element analysis

Regina Campbell-Malone, M. Moore, J. Decew, 2009 .

Finite element models of 3D woven composites based on numerically generated micro-geometry of reinforcement

Y. Lapusta, I. Tsukrov, A. Drach, 2014 .

Low Cost Real-Time Stray Current Monitoring System for Seawater Field Studies

I. Tsukrov, A. Drach, 2013 .

Open ocean aquaculture engineering : Numerical modeling

David W. Fredriksson, M. Robinson Swift, Barbaros Celikkol, 2000 .

Characterization of geometry and normal drag coefficients of copper nets

Andrew Drach, M. Robinson Swift, Barbaros Celikkol, 2011 .

Numerical modeling of nonlinear elastic components of mooring systems

B. Celikkol, I. Tsukrov, O. Eroshkin, 2005, IEEE Journal of Oceanic Engineering.

Fish cage and mooring system dynamics using physical and numerical models with field measurements

James D. Irish, David W. Fredriksson, M. Robinson Swift, 2003 .

Cyprus- Offshore Aquaculture Mooring Systems: Current Status and Future Development

Michalis Menicou, J. Decew, I. Tsukrov, 2012 .