Yuki Tsunazawa

发表

Investigation and evaluation of the detachment of printed circuit boards from waste appliances for effective recycling.

Shinsuke Murakami, Chiharu Tokoro, Yuki Tsunazawa, 2018, Waste management.

Investigation of optimum design for nanoparticle dispersion in centrifugal bead mill using DEM-CFD simulation

Yutaka Nagata, C. Tokoro, Yuki Tsunazawa, 2019, Advanced Powder Technology.

Effect of the roll stud diameter on the capacity of a high-pressure grinding roll using the discrete element method

Yutaka Nagata, C. Tokoro, Yuki Tsunazawa, 2020 .

Investigation of Part Detachment Process from Printed Circuit Boards for Effective Recycling Using Particle-Based Simulation

Chiharu Tokoro, Yuki Tsunazawa, Shuji Owada, 2016 .

Selective grinding of glass to remove resin for silicon-based photovoltaic panel recycling

C. Tokoro, Yuki Tsunazawa, M. Nishi, 2021 .

Design for Separating Performance of Grinding Media in Bead Mill by DEM Simulation

C. Tokoro, Yuki Tsunazawa, Shosei Hisatomi, 2017 .

DEM Simulation of Particle Behavior in Pan-type Pelletizer Considering the Effect of the Capillary Force

M. Sakai, C. Tokoro, Yuki Tsunazawa, 2014 .

Fe-kaolinite in granite saprolite beneath sedimentary kaolin deposits: A mode of Fe substitution for Al in kaolinite

M. Hoshino, K. Morimoto, Yuki Tsunazawa, 2018, American Mineralogist.

Contact force model including the liquid-bridge force for wet-particle simulation using the discrete element method

M. Sakai, C. Tokoro, Yuki Tsunazawa, 2016 .

Mechanism and kinetics of enhancement of cerium dissolution from weathered residual rare earth ore by planetary ball milling

G. Granata, C. Tokoro, Tatsuya Kato, 2019, Minerals Engineering.

DEM study on identification of mixing mechanisms in a pot blender

M. Sakai, Yuki Tsunazawa, N. Soma, 2021, Advanced Powder Technology.

Crystal formation and growth by slow cooling for recovery of magnetite particles from copper smelting slag

T. Okura, C. Tokoro, Yuki Tsunazawa, 2018, Mineral Processing and Extractive Metallurgy.

Numerical investigation of segregation behavior of multi-sized particles during pharmaceutical mini-tablet die filling

C. Tokoro, Yuki Tsunazawa, S. Yoshinaga, 2020 .

Structural Change Analysis of Cerianite in Weathered Residual Rare Earth Ore by Mechanochemical Reduction Using X-Ray Absorption Fine Structure

C. Tokoro, Tatsuya Kato, Yuki Tsunazawa, 2019, Minerals.

Evaluation of Effect of Feed Rate in a Hydraulic Gravity Separator for High-Quality Plastic Separation Using DEM-CFD Simulation

C. Tokoro, Yuki Tsunazawa, A. Nitta, 2021 .

Mechanochemical degradation treatment of TBBPA: A kinetic approach for predicting the degradation rate constant

Y. Takaya, C. Tokoro, Yuki Tsunazawa, 2022, Advanced Powder Technology.

Numerical simulation of industrial die filling using the discrete element method

Yusuke Shigeto, Chiharu Tokoro, Yuki Tsunazawa, 2015 .

A coarse grain model with parameter scaling of adhesion forces from liquid bridge forces and JKR theory in the discrete element method

C. Tokoro, Yuki Tsunazawa, Yoshihiro Kosaku, 2022, Chemical Engineering Science.

Investigating the upper limit for applying the coarse grain model in a discrete element method examining mixing processes in a rolling drum

Chiharu Tokoro, Yuki Tsunazawa, Yoshihiro Kosaku, 2021, Advanced Powder Technology.

Influence of Agitator Shape on Characteristics and Grinding Efficiency of Attritor Mill

Y. Takaya, K. Mochidzuki, C. Tokoro, 2022, Int. J. Autom. Technol..