Patrick Perré

发表

Grindability Behavior of Torrefied Biomass for Energy Purpose

Floran Pierre, Giana Almeida, J. O. Brito, 2010 .

Predicting oak wood properties using X-ray inspection: representation, homogenisation and localisation. Part I: Digital X-ray imaging and representation by finite elements

Patrick Perré, Eric Badel, P. Perré, 2002 .

A physical interpretation of the use of fractional operators for modelling the drying process

Ian Turner, Patrick Perré, 2018 .

New modelling approaches to predict wood properties from its cellular structure: image-based representation and meshless methods

Xavier Frank, Giana Almeida, Patrick Perré, 2015, Annals of Forest Science.

An investigation of nonlinear time-fractional anomalous diffusion models for simulating transport processes in heterogeneous binary media

Libo Feng, Ian W. Turner, Kevin Burrage, 2021, Commun. Nonlinear Sci. Numer. Simul..

Modelling fungal growth with fractional transport models

Ian Turner, Patrick Perré, Huan Du, 2020, Commun. Nonlinear Sci. Numer. Simul..

The Meshfree Finite Volume Method with application to multi-phase porous media models

Ian W. Turner, Patrick Perré, Brody H. Foy, 2017, J. Comput. Phys..

MPM modelling of the wood/water relations at the cellular level : shrinkage and collapse

Patrick Perré, Xavier Frank, Giana Almeida Perré, 2011 .

The extended distributed microstructure model for gradient-driven transport: A two-scale model for bypassing effective parameters

Ian W. Turner, Patrick Perré, Elliot J. Carr, 2016, J. Comput. Phys..

A Physical and Mechanical Model Able to Predict the Stress Field in Wood over a Wide Range of Drying Conditions

Patrick Perré, Joëlle Passard, P. Perré, 2004 .

Energy Consumption in the Convective Drying of Timber Analyzed by a Multiscale Computational Model

Romain Rémond, Giana Almeida, Patrick Perré, 2012 .

A Dual-Scale Modeling Approach for Drying Hygroscopic Porous Media

Ian W. Turner, Patrick Perré, Elliot J. Carr, 2013, Multiscale Model. Simul..

Design and optimization of industrial woody biomass pretreatment addressed by DryKiln_CRP, a multiscale computational model: Particle, bed, and dryer levels

Romain Rémond, Patrick Perré, Julien Colin, 2016 .

A Review of Modern Computational and Experimental Tools Relevant to the Field of Drying

Patrick Perré, P. Perré, 2011 .

Anatomy-properties : Modelling and validation tools for a micro-macro step. (case of oak wood)

Patrick Perré, Eric Badel, 2003 .

MPM modelling of the cellular collapse of bio-products due to capillary forces

Patrick Perré, Xavier Frank, Giana Almeida Perré, 2012 .

8th International IUFRO Wood Drying Conference: Brasov-Romania, August 24-29, 2003

Patrick Perré, M. Campean, 2003 .

A Dual-Scale Computational Model of Kiln Wood Drying Including Single Board and Stack Level Simulation

Romain Rémond, Patrick Perré, P. Perré, 2006 .

Hygromechanical behaviour of painted wooden panels from the cultural heritage, the Mona Lisa wooden support

Patrick Perré, Joseph Gril, 2008 .

A relevant and robust vacuum-drying model applied to hardwoods

Ian Turner, Patrick Perré, Adam L. Redman, 2017, Wood Science and Technology.

Energy Saving in Industrial Wood Drying Addressed by a Multiscale Computational Model: Board, Stack, and Kiln

Romain Rémond, Patrick Perré, Daniel Aléon, 2007 .

DRYING STRATEGIES CAPABLE OF REDUCING THE STRESS LEVEL OF A STACK OF BOARDS AS DEFINED BY A COMPREHENSIVE DUAL SCALE MODEL

Romain Rémond, Patrick Perré, P. Perré, 2008 .

Multiple-distribution DAEM modelling of spruce pyrolysis: An investigation of the best trade-off regarding the number and shape of distributions

Patrick Perré, Yong Tian, P. Perré, 2021 .

The effect of temperature and moisture content on the mechanical behaviour of wood: a comprehensive model applied to drying and bending

Romain Rémond, Patrick Perré, Joëlle Passard, 2007 .

Hygroscopic behaviour of lignocellulosic materials: Dataset at oscillating relative humidity variations

Romain Rémond, Giana Almeida, Patrick Perré, 2018, Journal of Building Engineering.

The Potential of Meshless Methods to Address Physical and Mechanical Phenomena Involved during Drying at the Pore Level

Xavier Frank, Patrick Perré, X. Frank, 2010 .

Patrick Perré, P. Perré, C. Moyne, 1991 .

A 3-D version of TransPore: a comprehensive heat and mass transfer computational model for simulating the drying of porous media

Ian Turner, Patrick Perré, I. Turner, 1999 .

The gripped-box model: A simple and robust formulation of sorption hysteresis for lignocellulosic materials

Romain Rémond, Giana Almeida, Patrick Perré, 2018 .

A Comparison of the Drying Simulation Codes Transpore and Wood2D which are used for the Modelling of Two-Dimensional Wood Drying Processes

Patrick Perré, P. Perré, I. W. Tumer, 1995 .

Drying at high temperature of sapwood and heartwood : theory, experiment and practical consequence on kiln control

Patrick Perré, M. Martin, P. Perré, 1994 .

Influence of torrefaction on some chemical and energy properties of maritime pine and pedunculate oak

Giana Almeida, J. O. Brito, Patrick Perré, 2011, BioResources.

A mesoscopic drying model applied to the growth rings of softwood: mesh generation and simulation results

Ian Turner, Patrick Perré, 2008 .

Multiphase flow in the vascular system of wood: From microscopic exploration to 3-D Lattice Boltzmann experiments

Xavier Frank, Giana Almeida, Patrick Perré, 2010 .

EXPERIMENTAL STUDY OF CAPILLARY RISE IN FABRICS USING AN ELECTRICAL RESISTANCE TECHNIQUE

Faten Fayala, Sassi Ben Nasrallah, Patrick Perré, 2008 .

High-Frequency Heating Controlled by Convective Hot Air: Toward a Solution for On-Line Drying of Softwoods

Romain Rémond, Patrick Perré, P. Perré, 2008 .

A heterogeneous wood drying computational model that accounts for material property variation across growth rings

Ian Turner, Patrick Perré, 2002 .

Modeling the Drying and Heat Treatment of Lignocellulosic Biomass: 2D Effects Due to the Product Anisotropy

Ian Turner, Romain Rémond, Patrick Perré, 2010 .

Physical Formulation and Numerical Modeling of High Frequency Heating of Wood

Patrick Perré, P. Perré, Michaël Bucki, 2003 .

The importance of considering exchange surface area reduction to exhibit a constant drying flux period in foodstuffs

Patrick Perré, P. Perré, B. May, 2002 .

Vacuum Drying of Wood with Radiative Heating: II. Comparison between Theory and Experiment

Ian Turner, Patrick Perré, I. Turner, 2004 .

Measurement of free shrinkage at the tissue level using an optical microscope with an immersion objective: results obtained for Douglas fir (Pseudotsuga menziesii) and spruce (Picea abies)

Patrick Perré, P. Perré, F. Huber, 2007, Annals of Forest Science.

Drying of Wood: Principles and Practices

Patrick Perré, Roger Keey, P. Perré, 2006 .

Complex Dielectric Properties of the Sapwood of Aspen, White Birch, Yellow Birch, and Sugar Maple

Patrick Perré, P. Perré, R. Hutcheon, 2008 .

Multiscale Modeling of Drying as a Powerful Extension of the Macroscopic Approach: Application to Solid Wood and Biomass Processing

Patrick Perré, P. Perré, 2010 .

Multiscale aspects of heat and mass transfer during drying

Patrick Perré, P. Perré, 2007 .

The use of fractional-in-space diffusion equations for describing microscale diffusion in porous media

Ian Turner, Patrick Perré, Milos Ilic, 2010 .

Advances in transport phenomena during convective drying with superheated steam and moist air

Patrick Perré, P. Perré, M. Moser, 1993 .

Energy Issues of Drying and Heat Treatment for Solid Wood and Other Biomass Sources

Giana Almeida, Patrick Perré, Julien Colin, 2014 .

Microwave drying of softwood in an oversized waveguide: Theory and experiment

Ian Turner, Patrick Perré, I. Turner, 1997 .

NMR imaging of fluid pathways during drainage of softwood in a pressure membrane chamber

Giana Almeida, Patrick Perré, Sébastien Leclerc, 2008 .

A large displacement formulation for anisotropic constitutive laws

Patrick Perré, B. Mauget, 1999 .

The use of implicit flux limiting schemes in the simulation of the drying process: A new maximum flow sensor applied to phase mobilities

Ian Turner, Patrick Perré, I. Turner, 2001 .

LATTICE-BOLTZMANN ANALYSIS OF CAPILLARY RISE

Sassi Ben Nasrallah, Patrick Perré, Mohammed El Amine Ben Amara, 2016 .

Comprehensive Drying Models Based on Volume-Averaging: Background, Application and Perspective

Ian Turner, Romain Rémond, Patrick Perré, 2011 .

Drying with internal heat generation: Theoretical aspects and application to microwave heating

Patrick Perré, T. Constant, P. Perré, 1996 .

TRANSPORE: A GENERIC HEAT AND MASS TRANSFER COMPUTATIONAL MODEL FOR UNDERSTANDING AND VISUALISING THE DRYING OF POROUS MEDIA

Ian Turner, Patrick Perré, I. Turner, 1999 .

2-D Solution for drying with internal vaporization of anisotropic media

Ian Turner, Patrick Perré, Joë Passard, 1999 .

Measuring moisture content profiles in a board during drying: a polychromatic X-ray system interfaced with a vacuum/pressure laboratory kiln

Romain Rémond, Patrick Perré, Ricardo Baettig, 2006, Wood Science and Technology.

FLUID MIGRATION IN TWO SPECIES OF BEECH (FAGUS SILVATICA AND FAGUS ORIENTALIS): A PERCOLATION MODEL ABLE TO ACCOUNT FOR MACROSCOPIC MEASUREMENTS AND ANATOMICAL OBSERVATIONS

Patrick Perré, Ali Karimi, P. Perré, 2002 .

A Control-Volume procedure compared with the Finite-Element method for calculating Stress and Strain during Wood Drying

Patrick Perré, Joëlle Passard, P. Perré, 1995 .

Patrick Perré, P. Perré, C. Moyne, 1991 .

Inverse analysis of the transient bound water diffusion in wood

Patrick Perré, Jerzy Weres, Wiesław Olek, 2005 .