X. Qin

发表

Effects of installation location on the in-service wind load of a tower crane

Wei Chen, X. Qin, Zhi-guo Yang, 2020 .

Stress concentration factors (SCFs) of bulge formed K-joints under balanced axial loads

X. Qin, Qing Zhang, Yuantao Sun, 2017 .

Wind-induced tower crane vibration and safety evaluation

Wei Chen, X. Qin, Zhi-guo Yang, 2020, Journal of Low Frequency Noise, Vibration and Active Control.

Degrees of bending (DoBs) in bulge formed K-joints under balanced axial loads

X. Qin, Qing Zhang, Yuantao Sun, 2018, Ocean Engineering.

A two-stage fault diagnosis methodology for rotating machinery combining optimized support vector data description and optimized support vector machine

X. Qin, Qing Zhang, Yuantao Sun, 2022, Measurement.

Crack Discontinuous Interface Simulation Method Based on the Mesh Free Diffraction Criterion

X. Qin, Qing Zhang, Yuantao Sun, 2018 .

Effects of Gap-width on a Twin Deck Bridge: Part 2 – Aerodynamic Admittance Functions

Kenny C. S Kwok, C. H. Fok, P. A. Hitchcock, 2006 .

Fault diagnosis using locality sensitive discriminant analysis for feature extraction

X. Qin, Qing Zhang, Yuantao Sun, 2017, 2017 Prognostics and System Health Management Conference (PHM-Harbin).

Research on reliability analytical method of complex system based on CBN model

Chao Liu, X. Qin, Qing Zhang, 2021, Journal of Mechanical Science and Technology.

Research on mechanical characteristics of bulge formed joint based on plastic strain energy density

X. Qin, Jinjin Zhai, Qing Zhang, 2023, International Journal of Pressure Vessels and Piping.

Design of a small reverberation box based on BEM-SEA method

Qing Zhang, Yuantao Sun, Li-gang Wang, 2015 .

An efficient discrete optimization algorithm for performance-based design optimization of steel frames

Yuantao Sun, Qing Zhang, Xianrong Qin, 2020, Advances in Structural Engineering.

Interval early warning method for state of engineering structures based on structural health monitoring data

X. Qin, Qing Zhang, Yuantao Sun, 2022, Structural Control and Health Monitoring.

K-SVD-based WVD enhancement algorithm for planetary gearbox fault diagnosis under a CNN framework

Yuantao Sun, Qing Zhang, Xianrong Qin, 2019, Measurement Science and Technology.

Robust fault diagnosis of quayside container crane gearbox based on 2D image representation in frequency domain and CNN

X. Qin, Qing Zhang, Yuantao Sun, 2023, Structural Health Monitoring.

Gearbox fault diagnosis based on frequency-domain Gramian angular difference field and deep convolutional neural network

X. Qin, Qing Zhang, Yuantao Sun, 2023, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.

Discrete topology and sizing optimization of frame structures with compliance constraints: A semidefinite programming-based approach

Qing Zhang, Xianrong Qin, Yuantao Sun, 2021 .

A time-domain method for load identification using moving weighted least square technique

Qing Zhang, Yuantao Sun, Kaige Chen, 2020 .

Foundation Treatments for Embankments over Highly Compressible Peat in CKE Project

X. Qin, D. Qu, H. Dong, 2010 .

Wind-induced pressures around a sectional twin-deck bridge model : effects of gap-width on the aerodynamic forces and vortex shedding mechanisms

Kenny C. S Kwok, Kenny C. S Kwok, X. R. Qin, 2012 .

Multiaxial fatigue life prediction model based on an improved strain energy density criterion

X. Qin, Qing Zhang, Yuantao Sun, 2022, International Journal of Pressure Vessels and Piping.

An intelligent fault diagnosis method based on domain adaptation for rolling bearings under variable load conditions

Qing Zhang, Yuantao Sun, Jianqun Zhang, 2021, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.

Gearbox compound fault diagnosis based on a combined MSGMD–MOMEDA method

X. Qin, Jun Zhang, Qing Zhang, 2021, Measurement Science and Technology.

Output-Only Modal Identification Based on Auto-regressive Spectrum-Guided Symplectic Geometry Mode Decomposition

X. Qin, Qing Zhang, Yuantao Sun, 2023, Journal of Vibration Engineering & Technologies.

Reliability analysis of stochastic structure with multi-failure modes based on mixed Copula

Qing Zhang, Xianrong Qin, Yuantao Sun, 2019, Engineering Failure Analysis.

Simulation of Wind Characteristics Surrounding a Container Terminal

Yuan Tao Sun, Xin Liao, Xian Rong Qin, 2013 .

Direct identification of flutter derivatives and aerodynamic admittances of bridge decks

Ming Gu, Xian-Rong Qin, M. Gu, 2004 .

Effects of frequency ratio on bridge aerodynamics determined by free-decay sectional model tests

Kenny C. S Kwok, X. R. Qin, C. H. Fok, 2009 .

Wind-induced self-excited vibrations of a twin-deck bridge and the effects of gap-width

Kenny C. S Kwok, C. H. Fok, P. A. Hitchcock, 2007 .

Investigation on bearing behavior of thin-walled bulge formed joint based on acoustic emission characteristic analysis

X. Qin, Jinjin Zhai, Qing Zhang, 2022, Engineering Failure Analysis.

Modal Frequency Identification of Quayside Container Crane Based on Empirical Mode Decomposition and Power Spectrum

Jiahui Liu, Qing Zhang, Xianrong Qin, 2019, 2019 International Conference on Advances in Construction Machinery and Vehicle Engineering (ICACMVE).

A two-stage feature selection and intelligent fault diagnosis method for rotating machinery using hybrid filter and wrapper method

Qing Zhang, Heng Li, Xianrong Qin, 2018, Neurocomputing.

Raw vibration signal pattern recognition with automatic hyper-parameter-optimized convolutional neural network for bearing fault diagnosis

Sun Yuantao, Qing Zhang, Xianrong Qin, 2020, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.

Hybrid reliability analysis and robust optimum process design as applied to hot stamping of steel sheets

Qing Zhang, Yuantao Sun, Kaige Chen, 2020, The International Journal of Advanced Manufacturing Technology.

Underdetermined Blind Source Separation for Multi-fault Diagnosis of Planetary Gearbox

X. R. Qin, H. Li, Q. Zhang, 2019, Computational and Experimental Simulations in Engineering.

A knowledge-based fault diagnosis method for rolling bearings without fault sample training

X. Qin, Qing Zhang, Yuantao Sun, 2024, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.

A feature vector with insensitivity to the position of the outer race defect and its application in rolling bearing fault diagnosis

X. Qin, Qing Zhang, Yuantao Sun, 2024, Structural Health Monitoring.