G. Dubbioso

发表

Simplified hydrodynamic models for the analysis of marine propellers in a wake-field

Giulio Dubbioso, Danilo Durante, C. Testa, 2013 .

Analysis of the performances of a marine propeller operating in oblique flow

Giulio Dubbioso, Andrea Di Mascio, Roberto Muscari, 2013 .

A Comprehensive Numerical Model for Horizontal Axis Wind Turbines Aeroelasticity

Massimo Gennaretti, Claudio Testa, Giulio Dubbioso, 2013 .

Experimental investigation on the effect of Leading Edge Tubercles on the Performance of Marine Propellers in fully wet condition

G. Aloisio, M. Falchi, Weichao Shi, 2022, Ocean Engineering.

Vortex structures in the wake of a marine propeller operating close to a free surface

A. Di Mascio, R. Muscari, G. Dubbioso, 2022, Journal of Fluid Mechanics.

Contribution of tip and hub vortex to the structural response of a marine rudder in the propeller slipstream

R. Muscari, G. Dubbioso, F. Magionesi, 2022, Journal of Fluid Mechanics.

Numerical analysis of marine propellers low frequency noise during maneuvering. Part II: Passive and active noise control strategies

A. Di Mascio, R. Muscari, F. Ortolani, 2022, Applied Ocean Research.

TURNING ABILITY CHARACTERISTICS STUDY OF A TWIN SCREW VESSEL BY CFD

R. Broglia, D. Durante, G. Dubbioso, 2011 .

Hydrodynamic and Hydroacoustic analysis of a marine propeller wake by TOMO-PIV

M. Felli, M. Falchi, G. Dubbioso, 2016 .

Direct and Indirect Experimental Methodologies for the Hydro-Acoustic Analysis of Marine Propellers

M. Felli, M. Falchi, G. Dubbioso, 2014 .

Analysis of a marine propeller operating in oblique flow. Part 2: Very high incidence angles

Giulio Dubbioso, Roberto Muscari, A. Di Mascio, 2014 .

Numerical analysis of marine propellers low frequency noise during maneuvering

Fabrizio Ortolani, Giulio Dubbioso, Andrea Di Mascio, 2020 .

Simulation of turning circle by CFD: Analysis of different propeller models and their effect on manoeuvring prediction

Giulio Dubbioso, Andrea Di Mascio, Riccardo Broglia, 2013 .

CFD analysis of turning abilities of a submarine model

Giulio Dubbioso, Riccardo Broglia, Stefano Zaghi, 2017 .

Experimental investigation of blade and propeller loads: Steady turning motion

F. Ortolani, G. Dubbioso, 2019, Applied Ocean Research.

Experimental investigation of single blade and propeller loads by free running model test. Straight ahead sailing

Fabrizio Ortolani, Giulio Dubbioso, F. Ortolani, 2019, Applied Ocean Research.

CFD analysis of the sensitivity of propeller bearing loads to stern appendages and propulsive configurations

Fabrizio Ortolani, Giulio Dubbioso, Andrea Di Mascio, 2017 .

Analysis of propeller bearing loads by CFD. Part I: Straight ahead and steady turning maneuvers

Fabrizio Ortolani, Giulio Dubbioso, Andrea Di Mascio, 2017 .

Turning ability analysis of a fully appended twin screw vessel by CFD. Part II: Single vs. twin rudder configuration

Giulio Dubbioso, Andrea Di Mascio, Riccardo Broglia, 2015 .

Investigation of the radial bearing force developed during actual ship operations. Part 1: Straight ahead sailing and turning maneuvers

Fabrizio Ortolani, Salvatore Mauro, Giulio Dubbioso, 2015 .

Analysis of twin screw ships' asymmetric propeller behaviour by means of free running model tests

Salvatore Mauro, Giulio Dubbioso, Andrea Coraddu, 2013 .

Analysis of propeller bearing loads by CFD. Part II: Transient maneuvers

Fabrizio Ortolani, Giulio Dubbioso, Andrea Di Mascio, 2017 .

Experimental and Numerical Investigation of Propeller Loads in Off-Design Conditions

Fabrizio Ortolani, Salvatore Mauro, Giulio Dubbioso, 2018 .

Experimental investigation of single blade loads by captive model tests in pure oblique flow. Part II: Propeller in-plane loads and preliminary comparison of single blade loads during transient phases

Fabrizio Ortolani, Giulio Dubbioso, Giorgio Tani, 2021 .

Analysis of the asymmetric behavior of propeller–rudder system of twin screw ships by CFD

Giulio Dubbioso, Andrea Di Mascio, Roberto Muscari, 2017 .

Investigation of the radial bearing force developed during actual ship operations. Part 2: Unsteady maneuvers

Fabrizio Ortolani, Salvatore Mauro, Giulio Dubbioso, 2015 .

Influence of propulsion system configuration on the manoeuvring performance by free running model tests

S. Mauro, G. Dubbioso, S. Mauro, 2012 .

ZIG-ZAG MANEUVER SIMULATION BY CFD FOR A TANKER LIKE VESSEL

R. Broglia, D. Durante, G. Dubbioso, 2013 .

Modal analysis of the wake past a marine propeller

Giulio Dubbioso, Francesca Magionesi, Roberto Muscari, 2018, Journal of Fluid Mechanics.

On the wake dynamics of a propeller operating in drift

G. Dubbioso, A. Di Mascio, A. Di Mascio, 2014, Journal of Fluid Mechanics.

Propeller modeling approaches for off–design operative conditions

Giulio Dubbioso, Diego Villa, Roberto Muscari, 2019, Ocean Engineering.

Analysis of the flow field around a rudder in the wake of a simplified marine propeller

Giulio Dubbioso, Roberto Muscari, Andrea Di Mascio, 2017, Journal of Fluid Mechanics.

CFD Analysis of Propeller-Rudder Interaction

Giulio Dubbioso, Andrea Di Mascio, Roberto Muscari, 2015 .

Method for estimating parameters of practical ship manoeuvring models based on the combination of RANSE computations and System Identification

Giulio Dubbioso, Riccardo Broglia, Michele Viviani, 2015 .

Investigation of Twin-Screw Naval Ships Maneuverability Behavior

Giulio Dubbioso, Andrea Di Mascio, Michele Viviani, 2011 .

Fluid–structure interaction of a marine rudder at incidence in the wake of a propeller

R. Muscari, G. Dubbioso, F. Magionesi, 2024, Physics of Fluids.

A Generalized Hybrid RANSE/BEM Approach for the Analysis of Hull–Propeller Interaction in Off-Design Conditions

R. Broglia, A. Capone, F. Ortolani, 2021, Journal of Marine Science and Engineering.