Huixin Liang

发表

Design and Compressive Behavior of Controllable Irregular Porous Scaffolds: Based on Voronoi-Tessellation and for Additive Manufacturing.

Guanjun Wang, Jianfeng Zhao, Lida Shen, 2018, ACS biomaterials science & engineering.

Design and Performance Evaluation of Porous Titanium Alloy Structures for Bone Implantation

Jianping Shi, Jiquan Yang, Huixin Liang, 2019, Mathematical Problems in Engineering.

Trabecular-like Ti-6Al-4V scaffolds for orthopedic: fabrication by selective laser melting and in vitro biocompatibility

Lan Li, Qing Jiang, You-wen Yang, 2019, Journal of Materials Science & Technology.

Design and statistical analysis of irregular porous scaffolds for orthopedic reconstruction based on voronoi tessellation and fabricated via selective laser melting (SLM)

Deqiao Xie, Lida Shen, Jianfeng Zhao, 2020 .

Early osteointegration evaluation of porous Ti6Al4V scaffolds designed based on triply periodic minimal surface models

Lan Li, Fei Yu, Jianping Shi, 2019, Journal of orthopaedic translation.

Mechanical properties of AlSi10Mg alloy fabricated by laser melting deposition and improvements via heat treatment

Deqiao Xie, Lida Shen, Changjiang Wang, 2019, Optik.

Cause of Angular Distortion in Fusion Welding: Asymmetric Cross-Sectional Profile along Thickness

Deqiao Xie, Lida Shen, Jianfeng Zhao, 2018, Materials.

Forming quality, mechanical properties, and anti-inflammatory activity of additive manufactured Zn-Nd alloy

C. Shuai, You-wen Yang, S. Peng, 2020, Journal of Zhejiang University-SCIENCE A.

Fabrication and properties of zirconia/hydroxyapatite composite scaffold based on digital light processing

You-wen Yang, Lida Shen, Changjiang Wang, 2020 .

Preparation of Al2O3-ZrO2 scaffolds with controllable multi-level pores via digital light processing

Deqiao Xie, Lida Shen, Changjiang Wang, 2020 .

Bioceramic enhances the degradation and bioactivity of iron bone implant

C. Shuai, You-wen Yang, S. Peng, 2019, Materials Research Express.

Robotic in situ 3D bio-printing technology for repairing large segmental bone defects

Xingsong Wang, Peng Wang, Yi Cao, 2020, Journal of advanced research.

Fabrication of a zirconia/calcium silicate composite scaffold based on digital light processing

You-wen Yang, Lida Shen, Changjiang Wang, 2022, Ceramics International.

Selective laser melted Fe-Mn bone scaffold: microstructure, corrosion behavior and cell response

C. Shuai, You-wen Yang, Deqiao Xie, 2020, Materials Research Express.

Polydopamine coating promotes early osteogenesis in 3D printing porous Ti6Al4V scaffolds.

Lan Li, Fei Yu, Jianping Shi, 2019, Annals of translational medicine.

Printing (Mn,Fe)2(P,Si) magnetocaloric alloys for magnetic refrigeration applications

Z. Tian, Feng Xu, X. Miao, 2020, Journal of Materials Science.

The Size Effect on Forming Quality of Ti–6Al–4V Solid Struts Fabricated via Laser Powder Bed Fusion

Jianping Shi, Deqiao Xie, Lida Shen, 2019, Metals.

Additive Manufacturing of Bio-Inspired Ceramic Bone Scaffolds: Structural Design, Mechanical Properties and Biocompatibility

You-wen Yang, Deqiao Xie, Lida Shen, 2022, SSRN Electronic Journal.

Analysis of Mechanical Properties and Permeability of Trabecular-Like Porous Scaffold by Additive Manufacturing

Deqiao Xie, Lida Shen, Huixin Liang, 2021, Frontiers in Bioengineering and Biotechnology.

Design and Compressive Behavior of Controllable Irregular Porous Scaffolds: Based on Voronoi-Tessellation and for Additive Manufacturing.

Deqiao Xie, Lida Shen, Jianfeng Zhao, 2018, ACS biomaterials science & engineering.

3D printed barium titanate/calcium silicate composite biological scaffold combined with structural and material properties.

Jianfeng Zhao, Huixin Liang, Mengxing Ge, 2024, Biomaterials advances.

Additive manufacturing of bone scaffolds

Shuping Peng, Cijun Shuai, Chengde Gao, 2018, International journal of bioprinting.

Effect of degenerative and radial tears of the meniscus and resultant meniscectomy on the knee joint: a finite element analysis

Lan Li, Jianping Shi, Xingsong Wang, 2019, Journal of orthopaedic translation.

Additive manufacturing of hydroxyapatite bone scaffolds via digital light processing and in vitro compatibility

Deqiao Xie, Lida Shen, Changjiang Wang, 2019, Ceramics International.

Stress and deformation evaluation of the subarea scanning effect in direct laser-deposited Ti-6Al-4V

Lida Shen, Deqiao Xie, Huixin Liang, 2018 .

Comprehension of overhanging structure distortion via selective laser melting based on theory of constraining force induced distortion

Deqiao Xie, Lida Shen, Jianfeng Zhao, 2020, 2020 17th International Bhurban Conference on Applied Sciences and Technology (IBCAST).

Design and Compressive Fatigue Properties of Irregular Porous Scaffolds for Orthopedics Fabricated Using Selective Laser Melting.

You-wen Yang, Deqiao Xie, Lida Shen, 2021, ACS biomaterials science & engineering.

Zn-doped chitosan/alginate multilayer coatings on porous hydroxyapatite scaffold with osteogenic and antibacterial properties

You-wen Yang, Lida Shen, Changjiang Wang, 2023, International journal of bioprinting.

Self-compassion mediates the perfectionism and depression link on Chinese undergraduates.

Lan Li, Jianping Shi, Huixin Liang, 2020, Annals of palliative medicine.

Microstructure development of AM-fabricated pure Zn with heat-treatment and its mechanical properties, degradation behavior, and biocompatibility

Deqiao Xie, Huixin Liang, Long Chao, 2024, Journal of Materials Research and Technology.

Design of porous structure based on the Voronoi diagram and stress line for better stress shielding relief and permeability

Deqiao Xie, Lida Shen, Yangdong He, 2023, Journal of Materials Research and Technology.

Towards a comprehensive understanding of distortion in additive manufacturing based on assumption of constraining force

C. Shuai, Deqiao Xie, Lida Shen, 2021, Virtual and Physical Prototyping.

Mechanical Properties of In-Situ Synthesis of Ti-Ti3Al Metal Composite Prepared by Selective Laser Melting

You-wen Yang, Deqiao Xie, Lida Shen, 2019, Metals.

Biocompatibility and antibacterial activity of MgO/Ca3(PO4)2 composite ceramic scaffold based on vat photopolymerization technology.

Deqiao Xie, Huixin Liang, Mengxing Ge, 2023, Biomaterials advances.