Ying Yan

发表

Analytical Elastic–Plastic Cutting Model for Predicting Grain Depth-of-Cut in Ultrafine Grinding of Silicon Wafer

P. Zhou, R. Kang, D. Guo, 2018, Journal of Manufacturing Science and Engineering.

Squeezing Dynamic Mechanism of High-Viscosity Droplet and its Application for Adhesive Dispensing in Sub-Nanoliter Resolution

Dazhi Wang, Xiao-dong Wang, Liding Wang, 2019, Micromachines.

Physically-based modeling of pad-asperity scale chemical-mechanical synergy in chemical mechanical polishing

P. Zhou, R. Kang, D. Guo, 2019, Tribology International.

High-air-flow-velocity assisted intermediate phase engineering for controlled crystallization of mixed perovskite in high efficiency photovoltaics

Yantao Shi, Shengye Jin, Junxue Liu, 2018 .

Impact of PAD Micro Contact Size and Distribution on the Planarization in CMP

P. Zhou, Lin Wang, Ying Yan, 2020, 2020 China Semiconductor Technology International Conference (CSTIC).

Efficient stable graphene-based perovskite solar cells with high flexibility in device assembling via modular architecture design

S. Zakeeruddin, M. Grätzel, Yantao Shi, 2019, Energy & Environmental Science.

Elastic recovery of monocrystalline silicon during ultra-fine rotational grinding

P. Zhou, R. Kang, D. Guo, 2020 .

Machinability of the Thermoplastic Polymers: PEEK, PI, and PMMA

P. Zhou, B. Li, Ying Yan, 2020, Polymers.

Insight into the Interfacial Elastic Contact in Stacking Perovskite Solar Cells

Yantao Shi, J. Bian, Ying Yan, 2019, Advanced Materials Interfaces.

Layer-dependent anisotropic frictional behavior in two-dimensional monolayer hybrid perovskite/ITO layered heterojunctions.

Chengming Jiang, Qikun Li, Sheng Bi, 2019, Physical Chemistry, Chemical Physics - PCCP.

Influence of inelastic collision on the dynamic behavior of particle sedimentation in high-viscosity fluids

Xuyue Wang, Ying Yan, Tao He, 2022, Advanced Powder Technology.

Modeling the microscale contact status in chemical mechanical polishing process

Lin Wang, Ying Yan, D. Guo, 2022, International Journal of Mechanical Sciences.

Static error model of a three-floated gyroscope with a rotor supported on gas-lubricated bearings

Ying Yan, F. Duan, Yan Li, 2018 .

Direct 3D Printing of Reactive Agitating Impellers for the Convenient Treatment of Various Pollutants in Water

Shengyang Tao, Yang Liu, Qi An, 2018 .

Effects of slurry pH on chemical and mechanical actions during chemical mechanical polishing of YAG

P. Zhou, Z. Zili, Ying Yan, 2021 .

New insights into the methods for predicting ground surface roughness in the age of digitalisation

Yonghao Wang, Ping Zhou, Dongming Guo, 2021 .

Enhanced Mass Transfer and Improved Catalyst Recovery in a Stirred Reactor by Polymeric Ionic Liquids Modified 3D Printed Devices

Shengyang Tao, Ying Yan, Lijing Zhang, 2018, Advanced Materials Technologies.

Chemical–mechanical wear of monocrystalline silicon by a single pad asperity

P. Zhou, R. Kang, D. Guo, 2017 .

Influence of Airflow Disturbance on the Uniformity of Spin Coating Film Thickness on Large Area Rectangular Substrates

Qiuyu Liu, Ying Yan, Ping Zhou, 2022, Coatings.

Activation functions selection for BP neural network model of ground surface roughness

Yonghao Wang, Ping Zhou, Ying Yan, 2020, J. Intell. Manuf..

Discrete Element Modeling of Rock Materials with Dilated Polyhedral Elements

S. Ji, Ying Yan, Shanshan Sun, 2015 .

Transition of granular flow patterns in a conical hopper based on superquadric DEM simulations

S. Ji, Ying Yan, Siqiang Wang, 2020, Granular Matter.

High precision material removal of copper surface by jet electrochemical machining

P. Zhou, D. Guo, Yiming Feng, 2020, IOP Conference Series: Materials Science and Engineering.

Effect of cupric ion concentration on the etching behavior of copper in Electrogenerated Chemical Polishing (EGCP)

P. Zhou, D. Guo, Ke Wang, 2019, Precision Engineering.

Effect of viscous film on electrochemical polishing of copper microstructures

Ying Yan, D. Guo, Chao Zhang, 2022, Other Conferences.

Morphological characteristics and formation mechanism of latent scratches in chemical mechanical polishing

Ying Yan, Zhuji Jin, Ping Zhou, 2022, Journal of Materials Processing Technology.

Near-field microscopy inspection of nano scratch defects on the monocrystalline silicon surface

P. Zhou, D. Guo, Ying Yan, 2019, Precision Engineering.

Discrete element analysis of breakage of irregularly shaped railway ballast

Ying Yan, Jinfeng Zhao, Shunying Ji, 2015 .

Granular matter: A special buffer for impact load

Xiaodong Chen, S. Ji, Ying Yan, 2013 .

A Global Correction Process for Flat Optics With Patterned Polishing Pad

P. Zhou, D. Guo, Ying Yan, 2019, Journal of Manufacturing Science and Engineering.

Sensitivity analysis of the surface integrity of monocrystalline silicon to grinding speed with same grain depth-of-cut

P. Zhou, R. Kang, D. Guo, 2020 .

A load identification method for the grinding damage induced stress (GDIS) distribution in silicon wafers

Ping Zhou, Dongming Guo, Renke Kang, 2016 .

Effects of bubbles on particle dynamic behavior and concentration distribution in High-viscosity liquid under negative pressure.

Xuyue Wang, Ying Yan, Ping Zhou, 2023, Journal of Colloid and Interface Science.

Micro-scale contact behavior and its effect on the material removal process during chemical mechanical polishing

P. Zhou, D. Guo, Lin Wang, 2021 .

Material removal characteristics of metal-polymer composites in the cutting process

Bo Li, Ying Yan, Ping Zhou, 2023, Journal of Polymer Research.

Crazing Initiation and Growth in Polymethyl Methacrylate under Effects of Alcohol and Stress

Bo Li, Ying Yan, Ping Zhou, 2023, Polymers.

Thermal Effect on Poly(methyl methacrylate) (PMMA) Material Removal in the Micromilling Process

P. Zhou, Ying Yan, Yu Mao, 2020, Polymers.

Energy Conservation in a Granular Shear Flow and Its Quasi-Solid-Liquid Transition

S. Ji, Ying Yan, 2009 .

Distribution Characteristics of Sub-Surface Cracks in Fused Quartz Ground with Different Worn Wheels

Ying Yan, Ping Zhou, Yonghao Wang, 2022, Materials.

Residual Stress Distribution in Silicon Wafers Machined by Rotational Grinding

P. Zhou, R. Kang, D. Guo, 2017 .

Compression properties of gas diffusion layers and its constitutive model under cyclic loading

P. Zhou, D. Guo, Ying Yan, 2021 .