R. Leroy

S. Moreau, R. Leroy, T. Lequeu, 2005, EuroSimE 2005. Proceedings of the 6th International Conference on Thermal, Mechanial and Multi-Physics Simulation and Experiments in Micro-Electronics and Micro-Systems, 2005..

Variable Amplitude Fatigue

N. Ranganathan, R. Leroy, D. Joly, 2013 .

Impact of aluminum wire and ribbon bonding technologies on D2PAK package reliability during thermal cycling applications

Marc Lethiecq, Sebastien Jacques, R. Leroy, 2015, Microelectron. Reliab..

Selection of machining condition on surface integrity of additive and conventional Inconel 718

M. A. Xavior, A. Duchosal, A. Morandeau, 2020 .

Machining influence on the fatigue resistance of Inconel 718 fabricated by Selective Laser Melting (SLM)

J. Cormier, A. Duchosal, A. Morandeau, 2019, Procedia Structural Integrity.

Numerical modeling and experimental measurement of MQL impingement over an insert in a milling tool with inner channels

Roger Serra, Hédi Hamdi, Arnaud Duchosal, 2015 .

An experimental investigation on oil mist characterization used in MQL milling process

Christophe Louste, Naryanaswami Ranganathan, Arnaud Duchosal, 2013 .

COMPUTATIONAL CONTOUR OF MIXED MODE CRACK-TIP PLASTIC ZONE FOR ALUMINUM ALLOY 2024T351

R. Leroy, D. Joly, T. Do, 2013 .

INFLUENCE OF BOTH RAKE AND FLANK FACES METAL WORKING FLUID (MWF) STRATEGIES ON MACHINABILITY OF Ti-6Al-4V ALLOY

A. Duchosal, A. Morandeau, R. Leroy, 2019 .

Determination of Plastic Zone Sizes at the Crack Tip

N. Ranganathan, F. Chalon, R. Leroy, 2015 .

An automatic system based on vibratory analysis for cutting tool wear monitoring

Wafaa Rmili, Abdeljalil Ouahabi, Roger Serra, 2016 .

Minimum Quantity Lubrication: Influence of the Oil Nature on Surface Integrity☆

Arnaud Duchosal, René Leroy, Guenhael Le Quilliec, 2016 .

Rise time and dwell time impact on Triac solder joints lifetime during power cycling

N. Batut, S. Jacques, L. Gonthier, 2010, 2010 27th International Conference on Microelectronics Proceedings.

Dynamic characterization of the cutting conditions in dry turning

Roger Serra, Hicham Chibane, René Leroy, 2009 .

Optimal milling conditions of aeronautical composite material under temperature, forces and vibration parameters

R. Leroy, R. Serra, H. Chibane, 2017 .

Minimum quantity lubrication advantages when applied to insert flank face in milling

Arnaud Duchosal, René Leroy, Sana Werda, 2017 .

Minimum quantity lubrication advantages when applied to insert flank face in milling

A. Duchosal, A. Morandeau, R. Leroy, 2017, The International Journal of Advanced Manufacturing Technology.

Optimal milling conditions for carbon/epoxy composite material using damage and vibration analysis

Roger Serra, Abdelhake Bouchou, Hicham Chibane, 2013 .

Numerical optimization of the Minimum Quantity Lubrication parameters by inner canalizations and cutting conditions for milling finishing process with Taguchi method

Roger Serra, Hédi Hamdi, Arnaud Duchosal, 2015 .

Mechanical and Thermal Load Effects of Novel MWFs Delivery Method in Milling of Ti–6Al–4V

A. Duchosal, A. Morandeau, R. Leroy, 2021, International Journal of Precision Engineering and Manufacturing-Green Technology.

Numerical Model Study of Flow Dynamics through an End-to-Side Anastomosis: Choice of Anastomosis Angle and Prosthesis Diameter

Patrick Lermusiaux, René Leroy, P. Lermusiaux, 2006, Annals of vascular surgery.

A numerical investigation on oil mist behavior used in Minimum Quantity Lubrication milling process

G. Quilliec, A. Duchosal, A. Morandeau, 2015 .