Hanlin Peng

发表

Large aspect ratio gold nanorods (LAR-GNRs) for mid-infrared pulse generation with a tunable wavelength near 3 μm.

Yong Liu, G. Qin, Hongyu Luo, 2019, Optics express.

Study on high-strength high-N austenitic stainless steel prepared by spark plasma sintering

Hanlin Peng, Lie-jun Li, L. Hu, 2021, Journal of Physics: Conference Series.

Self-seeded multi-wavelength Brillouin–erbium fibre laser with 20 GHz frequency gap

Y. Liu, Yudong Zhang, Guohua Shi, 2014 .

Weiping Fang, Hanlin Peng, Lie-jun Li, 2022, Scripta Materialia.

Optimization of the microstructure and mechanical properties of electron beam welded high-strength medium-entropy alloy (NiCoCr)94Al3Ti3

I. Baker, Weiping Fang, Hanlin Peng, 2022, Intermetallics.

Power controllable gain switched fiber laser at ~ 3 μm and ~ 2.1 μm

Yong Liu, Jianfeng Li, Hanlin Peng, 2021, Scientific reports.

Investigation on the blanking properties of thin multi-layer electrode of lithium-ion battery

Wancheng Zhang, Hao Ou, Xianglin Zhang, 2019, Journal of Physics and Chemistry of Solids.

Passively Q-Switched 3- $\mu$ m $\text{Ho}^{3+}$ -Doped Fiber Laser Based on Nonlinear Polarization Rotation

F. Ouellette, Yong Liu, Jianfeng Li, 2019, IEEE Photonics Technology Letters.

Gain-Switched Dual-Waveband Ho3+-Doped Fluoride Fiber Laser Based on Hybrid Pumping

F. Ouellette, Yong Liu, Hongyu Luo, 2019, IEEE Photonics Technology Letters.

A long cavity passive mode-locking fibre laser with the reflective non-linear optical loop mirror

Y. Liu, Heping Li, Guohua Shi, 2017 .

Microstructures and deformation mechanisms of the medium-entropy alloy (NiCoCr)76(Ni6AlTi)3

Ian Baker, Weiping Fang, Hanlin Peng, 2022, Materials Science and Engineering: A.

Superior strength-ductility synergy in a novel tailored nanoparticles-strengthened medium-entropy alloy

Hanlin Peng, L. Hu, Ian Baker, 2022, Scripta Materialia.

On the correlation between L12 nanoparticles and mechanical properties of (NiCo)52+2x(AlTi)4+2xFe29-4xCr15 (x=0-4) high-entropy alloys

Hanlin Peng, Jixiang Gao, Liejun Li, 2020 .

Ripening of L12 nanoparticles and their effects on mechanical properties of Ni28Co28Fe21Cr15Al4Ti4 high-entropy alloys

Hanlin Peng, Weipeng Zhang, W. W. Zhang, 2020 .

Microstructure and Properties of Porous High-N Ni-Free Austenitic Stainless Steel Fabricated by Powder Metallurgical Route

Hanlin Peng, L. Hu, T. Ngai, 2018, Materials.

Characterization of high-strength high‑nitrogen austenitic stainless steel synthesized from nitrided powders by spark plasma sintering

I. Baker, Hanlin Peng, W. W. Zhang, 2019, Materials Characterization.

Stress-state-dependent deformation and fracture behaviors in a cold-rolled 7Mn steel

P. Hodgson, Xianglin Zhang, Xing Wei, 2022, Materials Science and Engineering: A.

Bimodal microstructure evolution and strength-ductility co-enhancement of hot-extruded Al–La–Mg–Mn alloy

Hanlin Peng, Jixiang Gao, Zhengwu Peng, 2022, Materials Science and Engineering: A.

A novel high-strength Al-La-Mg-Mn alloy for selective laser melting

Hanlin Peng, Jixiang Gao, Zhengwu Peng, 2022, Journal of Materials Science & Technology.

Nano-Mechanical Properties and Creep Behavior of Ti6Al4V Fabricated by Powder Bed Fusion Electron Beam Additive Manufacturing

Weiping Fang, Xing Wei, Hanlin Peng, 2021, Materials.

Evolution of the microstructure and mechanical properties of powder metallurgical high-speed steel S390 after heat treatment

Xianglin Zhang, Hanlin Peng, Liejun Li, 2018 .

The evolution of microstructure and micro-mechanical properties in the repeatedly renovated QHZ punch in fine-blanking

Wei Wu, Xianglin Zhang, Jingwen Yi, 2018 .

Highly sensitive plasmonic biosensor enhanced by perovskite-graphene hybrid configuration

Junxian Liu, Hanlin Peng, Yufeng Yuan, 2023, Journal of Optics.

Microstructural Evolution, Behavior of Precipitates, and Mechanical Properties of Powder Metallurgical High-Speed Steel S390 During Tempering

Jianyu Zhou, Xianglin Zhang, Xing Wei, 2018, Metallurgical and Materials Transactions A.

Effects of austenitizing temperature on microstructure and mechanical property of a 4-GPa-grade PM high-speed steel

Xianglin Zhang, W. Gong, Hanlin Peng, 2018 .

Ultrafine-grained Al–La–Mg–Mn alloy with superior thermal stability and strength-ductility synergy

Hanlin Peng, Jixiang Gao, Tao Ban, 2023, Materials Science and Engineering: A.

Continuous-wave (CW) broadband generation in a linear cavity filterless fiber laser

Y. Liu, Guohua Shi, Pinghe Wang, 2014 .

An investigation on microstructure and mechanical properties of strong yet ductile nanoparticle-strengthened, partially recrystallized, medium-entropy alloy

Hanlin Peng, L. Hu, Ian Baker, 2024, Intermetallics (Barking).

Excellent cryogenic mechanical properties of a novel medium-entropy alloy via vanadium-doping and hetero-grain/precipitation engineering

Hanlin Peng, Yupeng Zhang, L. Hu, 2024, Materials Characterization.

Electron beam welding of L12-nanoparticle-strengthened strong and ductile medium-entropy alloys for cryogenic applications

Ian Baker, Hanlin Peng, L. Hu, 2023, Materials Science & Engineering: A.

A comparison of thermo-mechanically-treated and electron-beam-welded strong, ductile medium-entropy alloy: Microstructural evolution and deformation mechanisms

Hanlin Peng, L. Hu, Ian Baker, 2023, Materials Science and Engineering: A.

Thermal stability of microstructure and their influences on mechanical properties of precipitation-hardened medium-entropy alloy Ni43.4Co25.3Cr25.3Al3Ti3

Ian Baker, Hanlin Peng, Yupeng Zhang, 2023, Materials Characterization.

Selective electron beam additive manufacturing of a nanoparticle-strengthened medium-entropy alloy for cryogenic applications

Hanlin Peng, L. Hu, Ian Baker, 2024, Materials Science and Engineering: A.

Watt-level gain-switched fiber laser at 3.46 μm.

Hongyu Luo, Hanlin Peng, Francois Ouellette, 2019, Optics express.